• Journal of the Korea Safety Management & Science
• /
• v.16 no.2
• /
• pp.231-236
• /
• 2014

In this study, the changes in collection efficiencies due to the time changes of activated carbons were ascertained, and in order to identify the magnitude of adsorption, the before-use and after-use iodine adsorption values were analyzed. In addition, as a result of examining the characteristics of continuous process and non-continuous process and as a result of investigating whether the emission standards would be maintained, the continuous process and printing facilities were seen as not being able to maintain the emission standards. Also were found, in the case of non-continuous process,-taking into consideration the special nature of the job -for 4${\o}$ palletized charcoal, a collection efficiency near 50% was shown even after 96 hours. Also, when the inlet concentration was about 300ppm, it is thought that the emission standards would be maintained if the activated carbons are replaced within at least 96 hours in the case of 4${\o}$ palletized charcoal and the use was deemed pointless in the case of carbon. The results of this study are expected to provide assistance in selecting replacement periods for activated carbons and in selecting absorbents at the project sites, and are expected to be of significant help in the selection of precipitators that can collect total hydrocarbons for compliance of the emission standards.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.17 no.6
• /
• pp.696-707
• /
• 1988

This study simulates a typical solar system using the transient simulation program TRNSYS, and calculates the maximum cooling load of the model room of $50m^2$. In this study, energy rate control method is used in calculating a maximum cooling load. On the ground of the maximum cooling load of the model room, the variables that have an effect on the solar collection performance of the solar system are made a selection. Also in this study the trend of the solar collection performance is shown as the variables change. The results show that the variables which have an effect on the collection performance are collector area, collector mass flow rate, collector slope and the volume of storage tank, and the optimal value of Ac/Vt is not constant but varies as the collector area and the collector mass flow rate. Also the results show that for cooling system the optimal value of the collector slope is latitude minus $15^{\circ}$ during the seasonal operations, and twenty percent of the maximum cooling load is saved with the aid of the solar energy.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1068-1074
• /
• 2009

The progress is widely used as a critical index for successful construction project management. In spite of the importance of progress measurement, the excessive management effort to collect and maintain detailed data has been highlighted as a major barrier to measurement of highly accurate progress. In order to reduce the required workload and to enhance accuracy, several researches have been conducted. These researches can be categorized into two groups. First group focuses on automated data collection utilizing advanced technologies only for limited construction tasks. The second group is a research area where the standard progress measurement methodologies encompassing entire construction tasks are investigated. Topics include the adjusting the level of details, standardizing work processes, and applying flexible WBS. However, the techniques for automated data collection are not fully investigated yet in the second group. Combining these two research areas can provide a solution for more effective progress management in terms of enhancing accuracy and optimizing workload. However, there has been no comprehensive research addressing these two research groups in an integrated manner. In this context, the purpose of this paper is to propose a methodology that identifies the most suitable measurement method and data acquisition technology (e.g., GPS, RFID, etc.) for entire construction tasks of a project. The proposed methodology in this paper will be able to facilitate the selection process of data acquisition technologies for entire construction tasks of a project and to support the overall enhancement of automated progress management.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1324-1327
• /
• 2009

Social infrastructure is the basis of public welfare and should be recognized and managed as important assets. Bridge is one of the most important infrastructures to be managed systematically because the impact of the failure is critical. It is essential to monitor the performance of bridges in order to manage them as an asset. But current analytical methods such as predictive modeling and structural analysis are very complicated and difficult to use in practice. To apply these methods, structural and material condition data collection should be performed in each element of bridge. But it is difficult to collect these detailed data in large numbers and various kinds of bridges. Therefore, it is necessary to collect data of major measurement items and predict the life of bridges roughly with advanced information technologies. When certain measurement items reach predefined limits in the monitoring bridges, precise performance measurement will be done by detailed site measurement. This paper describes the selection of major measurement items that can represent the tendency of bridge life and introduces automated bridge data collection test-bed using wireless sensor network technology. The following will be major parts of this paper: 1) Examining the features of conventional bridge management system and data collection method 2) Mileage concept as a bridge life indicator and measuring method of the indicator 3) Test-bed of automated and real-time based bridge life indicator monitoring system using wireless sensor network

• Journal of Korean Society of Archives and Records Management
• /
• v.11 no.2
• /
• pp.165-188
• /
• 2011

This paper suggests the methods of curriculum-standards analysis and collection analysis. This paper also designs the sample of archival contents for education based on this methods. This paper intends to verify the methods and to suggest a model of archival contents for education available in connection with the curriculum-standards by designing the archival contents for education on national unification in high school classrooms.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.5
• /
• pp.338-344
• /
• 2014

As the role of information collection becomes increasingly important in the enormous data environment, there is growing demand for more intelligent information technologies for managing complex data. On the other hand, it is difficult to find a solution because of the data complexity and big scaled amount. Accordingly, there is a need for a special intelligent knowledge base frame that can be operated by itself flexibly. In this paper, by adopting switching function for signal transmission in the synapse of the human brain, I/E selective activation based knowledge reconfiguring mechanism is proposed for building more intelligent information management system. In particular, knowledge network design, a special knowledge node structure, Type definition, I/E gauge definition and I/E matching scheme are provided. Using these concepts, the proposed system makes the functions of activation by I/E Gauge, selection and reconfiguration. In a more efficient manner, the routing and reasoning process was performed based on the knowledge reconfiguration network. In the experiments, the process of selection by I/E matching, knowledge reconfiguration and routing & reasoning results are described.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.3
• /
• pp.445-452
• /
• 2002

The main objective of modern reproductive technologies in pig reproduction is to increase reproductive efficiency and rates of genetic improvement. They also offer potential for greatly extending the multiplication and transport of genetic materials and the conservation of unique genetic resources in reasonably available forms for possible future use. The development and refinement of these technologies is concentrating on gamete and embryo collection, sorting and preservation, in vitro production of embryos, culturing, manipulation of embryos (splitting, nuclear transfer, production of chimeras, establishment embryo stem cells, and gene transfer) and embryo transfer. Also, the development of these novel technologies is facilitated by modern equipment for ultrasonography, microscopy, cryopreservation, endoscopy, and flow cytometry, microinjectiors, micromanipulators and centrifugation. The real impact on herd productivity will come from combining new reproductive techniques with powerful DNA technologies. The new reproductive techniques will allow a rapid turnover of generations, whereas the DNA technology can provide selection, which does not need phenotypic information when the selection decisions are made.

• Asian Journal of Business Environment
• /
• v.4 no.3
• /
• pp.13-18
• /
• 2014

Purpose - This study examines students' perspectives (stream-wise) of parameters affecting education quality in an affiliated undergraduate engineering institution in NCR, Haryana. Research design, data, and methodology - This study involves descriptive research and data collection using a structured questionnaire based on the Likert scale. The sample comprises 500 student respondents. For data analysis, an f-test was performed using high quality SPSS software. Results - For "Selection" and "Personality Development & Industry Exposure," the analysis of variance revealed a statistical difference between the mean values of the groups. Whereas, for "Academic Excellence," "Infrastructure," "Placements," and "Management & Administration," the analysis of variance revealed no statistical difference between the mean values of the groups. Conclusions - Students' perceptions about the "Selection" and "Personality Development & Industry Exposure" change according to the various specializations they opt for in their undergraduate engineering education in Haryana. Whereas, for "Academic Excellence," "Infrastructure," "Placements," and "Management & Administration," the perceptions of the students do not vary because of the different specializations they have opted for in their undergraduate engineering education.

• The International Journal of Costume Culture
• /
• v.3 no.2
• /
• pp.147-160
• /
• 2000

The purposes of the present study were to investigate the factors of consumer dissatisfaction with backpacks and to examine if the levels of dissatisfaction with the factors differ significantly among the groups determined by demographic characteristics and purchase behaviors. The differences in the purchase behaviors of backpacks were also tested among the groups determined by demographic characteristics. Data collection was consisted of two pilot tests and the final test. The questionnaire was distributed to 40 students of universities in Seoul from July 1 to 13 in 2000 and 351 were usable. Data were analyzed by factor analysis, t-test, χ²analysis, MANOVA, ANAOVA, Duncan's multiple range tests using SPSS PC/sup +/ Program. Five factors were formulated : durability, ease-of-care/color fastness, dimensional stability, wearability and design. Subjects were most dissatisfied with the dimensional stability of backpacks. Different demographic characteristics and purchase behaviors resulted in significantly different levels of dissatisfaction with selected factors. Significant differences were also found in selected selection criteria and purchase behaviors among groups determined by some demographic characteristics.

• Journal of Information Management
• /
• v.33 no.2
• /
• pp.33-48
• /
• 2002

This paper describes evaluation methods of serials and also introduces a case study related to the selection and evaluation of serials. A total of 1,291 titles of serials, which were subscription titles of POSTECH in the field of science and technology in 2002, were analyzed. This study employs the analysis of POSTECH SCI Article reference data to suggest the models for evaluating serials and to identify the guideline for journal selection and collection development.