• Journal of Chest Surgery
• /
• 제24권6호
• /
• pp.570-578
• /
• 1991

The spontaneous pneumothorax is the sudden collapse of the lung usually by air leakage from the ruptured sub-pleural bleb and has high recurrence rate. For prevention against recurrence, many drugs such as tetracycline, talcum powder, quinacrine, etc. have been used but the effects are not satisfactory. We reduced the recurrence rate successfully by the fibrin glue instillation through the chest tube. From the January 1989 to September 1990, we have managed 65 patients of spontaneous pneumothorax with closed thoracostomy and fibrin glue[fibrinogen 1gm/50ml with approtinin 3, 000kIU /ml, thrombin 5, 000IU /ml in 3% each 10ml] instillation through the chest tube. And we compared the results with those of 106 patients of spontaneous pneumothorax who were managed only by the closed thoracostomy from January 1985 to December 1988. Only the patients who visited our hospital with recurrence were considered as the recurred cases but the others were considered as not recurred. And the removal of chest tubes usually done 3 days after cessation of air leakage or 2 days after fibrin glue instillation Statistical analysis was done by X2-test. The results were as followings: 1. The recurrence rate of fibrin glue instillation group was lower than that of non-instillation group[1st attack: 15.1% versus 27.6% p<0, 05, the 2nd attack: 33.3% versus 73.7% p<0.01, the total 18.5% versus 35.8% p<0.01]. 2. The mean duration of chest tube drainage in the fibrin glue instillation group was shorter than non-instillation group[4.24$\pm$1.36 days versus 4.48$\pm$1.73 days p<0.05]. 3. The mean duration of hospitalization was shorter in the instillation group [8.12$\pm$3.5 days versus 10.8$\pm$3.8 days p<0.05] The complications were transient mild fever, chest pain, pleural effusion in 46 cases of 65 patients, but those didn`t make any problem. We concluded that the fibrin glue is effective in the reduction of recurrence rate, obliteration of air leakage and duration of hospitalization.

• Earthquakes and Structures
• /
• 제14권3호
• /
• pp.249-259
• /
• 2018

This paper aims to assess the seismic risk of a plane moment-resisting frames (MRFs) consisting of concrete-filled double skin steel tube (CFDST) columns and I-section steel beams. Firstly, three typical limit performance levels of CFDST structures are determined in accordance with the cyclic tests of seven CFDST joint specimens with 1/2-scaled and the limits stipulated in FEMA 356. Then, finite element (FE) models of the test specimens are built by considering with material degradation, nonlinear behavior of beam-column connections and panel zones. The mechanical behavior of the concrete material are modeled in compression stressed condition in trip-direction based on unified strength theory, and such numerical model were verified by tests. Besides, numerical models on 3, 6 and 9-story CFDST frames are established. Furthermore, the seismic responses of these models to earthquake excitations are investigated using nonlinear time-history analyses (NTHA), and the limits capacities are determined from incremental dynamic analyses (IDA). In addition, fragility curves are developed for these models associated with 10%/50yr and 2%/50yr events as defined in SAC project for the region on Los Angeles in the Unite State. Lastly, the annual probabilities of each limits and the collapse probabilities in 50 years for these models are calculated and compared. Such results provide risk information for the CFDST-MRFs based on the probabilistic risk assessment method.

• 대한토목학회논문집
• /
• 제29권2A호
• /
• pp.109-118
• /
• 2009

이 연구에서는 CFT부재를 거더로 사용하는 신형식 강합성 교량 시스템 개발을 최종목표로 하고, CFT부재의 휨거동 특성을 규명하기 위한 부재실험을 수행하였다. 실험체는 충전재 강도 및 합성조건 변화 등 설계에 영향을 미치는 주요 매개변수를 고려하여 제작하였고, 휨재하 실험의 결과분석을 통해 CFT부재가 갖는 내력성능을 효율적으로 설계에 반영하기 위한 방안을 고찰하였다. 충전강관은 중공강관에 비해 휨강도 및 연성이 크게 증가함을 확인할 수 있었으며, 콘크리트의 취성적 재료 특성이 강관의 구속효과로 보완되는 결과를 확인하였다. 내부 전단연결재를 둠으로써 충전재와 강관 사이의 미끄러짐을 억제하여 완전합성단면으로 거동하였고, ㄱ형 전단연결재의 보강재 효과가 휨내력 증가에 다소 기여하고 있음을 알 수 있었다.

• Structural Engineering and Mechanics
• /
• 제58권3호
• /
• pp.555-576
• /
• 2016

In this paper an efficient approach is introduced for design and analysis of double-layer grids including both geometrical and material nonlinearities, while the results are compared with those considering material nonlinearity. Optimum design procedure based on Enhanced Colliding Bodies Optimization method (ECBO) is applied to optimal design of two commonly used configurations of double-layer grids. Two ranges of spans as small and big sizes with certain bays of equal length in two directions are considered for each type of square grids. ECBO algorithm obtains minimum weight grid through appropriate selection of tube sections available in AISC Load and Resistance Factor Design (LRFD). Strength constraints of AISC-LRFD specifications and displacement constraints are imposed on these grids.

• 천문학회지
• /
• 제27권1호
• /
• pp.13-29
• /
• 1994

We have constructed a 3-dim hydrodynamics code called BTSPH. The fluid dynamics part of the code is based on the smoothed particle hydrodynamics (SPH), and for its Poisson solver the binary tree (BT) scheme is employed. We let the smoothing length in the SPH algorithm vary with space and time, so that resolution of the calculation is considerably enhanced over the version of SPH with fixed smoothing length. The binary tree scheme calculates the gravitational force at a point by collecting the monopole forces from neighboring particles and the multipole forces from aggregates of distant particles. The BTSPH is free from geometric constraints, does not rely on grids, and needs arrays of moderate size. With the code we have run the following set of test calculations: one-dim shock tube, adiabatic collapse of an isothermal cloud, small oscillation of an equilibrium polytrope of index 3/2, and tidal encounter of the polytrope and a point mass perturber. Results of the tests confirmed the code performance.

• KCI Concrete Journal
• /
• 제14권3호
• /
• pp.111-120
• /
• 2002

This study proposes a joint model consisting of different types of members as a new structural system, and then investigates the resulting structural behavior. The joint model consists of a concrete-filled steel tube column (CFT) together with a steel reinforced concrete at the end plus reinforced concrete beam at the center. For comparison, two other joint models were designed, that are, a CPT with a reinforced concrete beam, and a CFT with a steel reinforced concrete at the end plus steel concrete beam at the center, then their joint capacity and rigidity, energy absorption capacity, etc., were all investigated. From the results, the CFT column with a steel reinforced concrete at the end plus steel concrete beam at the center was outstanding in terms of its capacity and rigidity. The results of this analysis demonstrate that an adequate connection type and reinforcement method with different materials of increasing the rigidity, thereby producing a capacity improvement along with protection from pre-fractures.

• 한국생산제조학회지
• /
• 제21권2호
• /
• pp.241-245
• /
• 2012

In this study, one type of circular shaped composite tube was used, combined with reinforcing foam and without foam. Furthermore, CFRP (Carbon Fiber Reinforced Plastic) circular member manufactured from CFRP prepreg sheet for lightweight design. CFRP is an anisotropic material which is the most widely adapted lightweight structural member. The crashworthy behavior of circular composite material tubes subjected to static axial compression under same conditions is reported in this paper. The collapse mode during the failure process were observed and analyzed. The behavior of polymeric foams to the tubes crashworthiness were also investigated.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.167-168
• /
• 2009

CFT 구조는 강재내부와 심부콘크리트 사이의 상호작용에 의한 구조물의 변형성능, 강성, 내력의 증가때문에 새로 개발된 CFTA 거더에 적용되었다. CFTA 거더는 아치형상과 긴장력을 이용하여 외부하중에 의한 인장응력을 감소시키는 구조물이다. 본 논문은 CFTA 거더교의 제작중 및 공용중 안정성을 검토하기 위하여 시공절차를 제안하였으며, 이에 따른 시공단계해석을 수행하였다.

• Journal of Chest Surgery
• /
• 제28권2호
• /
• pp.166-169
• /
• 1995

Pneumothorax, a frequently encountered disease in the clinic, has been interesting to surgeons for it`s high recurrence rate. 52 patients with a second attack of pneumothorax at our hospital in a 24 month period were evaluated especially for the risk factors of recurrence. The results were as follows:1. Patients after operative treatment[21 cases There were no postoperative complications and recurrence.2. Patients with tube drainage or conservative treatment [31 cases [i Overall recurrence rate was 45.2 %. [ii Suggestive risk factors for the recurrence were: age above 30 years, short period of thoracostomy less than six days. And other factors such as male, right lung, higher level of lung collapse were thought to be followed further more.

• Journal of Chest Surgery
• /
• 제24권10호
• /
• pp.1000-1004
• /
• 1991

Children`s small airway precludes the use of standard methods of bronchial separation. So, we performed the posterior thoracotomy under the prone position in 3 cases to avoid endobronchial gravity spillage of secretion and infected debris from the diseased lung to the contralateral sound lung. The advantages of the posterior thoracotomy under the prone position was discussed. In two cases, empyema with total collapse of left lung and congenital cystic adenomatoid malformation [CCAM] of right lung, copious secretion was spilled through the endotracheal tube but could be removed successfully by the endotracheal suction. In the third case of bilateral peripleural abscess, bilateral posterior thoractomy was done without position change. All procedures were performed without any technical difficulty and complication.