1 |
Zhang, Y.F., Zhao, J.H. and Yuan, W.F. (2013), "Study on compressive bearing capacity of concrete-filled square steel tube column reinforced by circular steel tube inside", J. Civil Eng. Manage., 19, 787-795.
DOI
|
2 |
Uenaka, K., Kitoh, H. and Sonoda, K. (2010), "Concrete filled double skin circular stub columns under compression", Thin Wall. Struct., 48(1), 19-24.
DOI
|
3 |
USGS (2012), U. S. Geological Survey, http://www.usgs.gov/.
|
4 |
Wei, S., Mau, S., Vipulanandan, C. and Mantrala, S. (1995), "Performance of new sandwich tube under axial loading: Experiment", J. Struct. Eng., 121(12), 1806-1814.
DOI
|
5 |
Ye, J.H. and Jiang, L.Q. (2018), "Collapse mechanism analysis of a steel moment frame based on structural vulnerability theory", Arch. Civil Mech. Eng., 18(3), 833-843.
DOI
|
6 |
Yu, M.H. (2004), Unified Strength Theory and its Application, Springer, Berlin, Heidelberg.
|
7 |
Zhang, F.R., Wu, C.Q., Zhao, X.L. Heidarpour, A. and Wang, H.W. (2015), "Numerical modeling of concrete-filled doubleskin steel square tubular columns under blast loading", J. Perform. Constr. Facil., 29(5), B4015002-1-12.
DOI
|
8 |
Zhang, Y.F. and Zhang, D.F. (2015), "Experimental study on the seismic behaviour of the connection between concrete-filled twin steel tubes column and steel beam", Eur. J. Environ. Civil Eng., 19(3), 347-365.
DOI
|
9 |
Zhang, Y.F., Zhao, J.H. and Cai, C.S. (2012), "Seismic behavior of ring beam joints between concrete-filled twin steel tubes columns and reinforced concrete beams", Eng. Struct., 39, 1-10.
DOI
|
10 |
Castro, J.M., Elghazouli, A.Y. and Izzuddin, B.A. (2013), "Modeling of the panel zone in steel and composite moment frames", Eng. Struct., 27, 129-144.
|
11 |
Clark, W. (1994), "Axial load capacity of circular steel tube columns filled with high strength concrete", M. Eng. Thesis, Dept. of Civil and Building Engineering, Victoria Univ. of Technology, Melbourne, Australia.
|
12 |
Eurocode 3 (2005), Design of Steel Structures, Part 1.1: General Rules and Rules for Buildings, European Standard EN 1993-1-1, European Committee for Standardization (CEN), Brussels.
|
13 |
Cornell, C.A., Jalayer, F., Hamburger, R.O. and Foutch, D.A. (2002), "Probabilistic basis for 2000 SAC FEMA steel moment frame guidelines", J. Struct. Eng., 128(4), 526-533.
DOI
|
14 |
Dong, C.X. and Ho, J.C.M. (2012), "Uni-axial behaviour of normal strength CFDST columns with external steel rings", Steel. Compos. Struct., 13(6), 587-606.
DOI
|
15 |
Ellingwood, B.R. and Kinali, K. (2009), "Quantifying and communicating uncertainty in seismic risk assessment", Struct. Saf., 31, 179-187.
DOI
|
16 |
Eurocode 4 (2004), Design of Composite Steel and Concrete Structures, Part 1.1: General Rules and Rules for Buildings, European Standard EN 1994-1-1, European Committee for Standardization (CEN), Brussels.
|
17 |
FEMA (2000), State of the Art Report on Systems Performance of Steel Moment Frames Subject to Earthquake Ground Shaking, Prepared by the SAC Joint Venture for the FEMA-355C, Washington, DC.
|
18 |
Eurocode 8 (2004), Design of Structures for Earthquake Resistance, Part 1: General Rules, Seismic Actions and Rules for Buildings, European Standard EN 1998-1-1, European Committee for Standardization (CEN), Brussels.
|
19 |
Fan, J., Baig, M. and Nie, J. (2008), "Test and analysis on doubleskin concrete filled tubular columns", Tubular Structures XII: Proc., Tubular Structures XII, Taylor & Francis Group, London.
|
20 |
FEMA (2000), Prestandard and Commentary for the Seismic Rehabilitation of Buildings, FEMA 356, Washington, DC.
|
21 |
HAZUS (1997), Earthquake Loss Estimation Methodology, National Institute of Building for the FEMA, Washington, DC.
|
22 |
Han, L.H., Huang, H., Tao, Z. and Zhao, X.L. (2006), "Concretefilled double skin steel tubular (CFDST) beam-columns subjected to cyclic bending", Eng. Struct., 28(12), 1698-1714.
DOI
|
23 |
Han, L.H., Yang, Y.F. and Tao, Z. (2003), "Concrete-filled thinwalled steel SHS and RHS beam-column subjected to cyclic loading", Thin Wall. Struct., 41(9), 801-833.
DOI
|
24 |
Han, T.H., Michael Stallings, J. and Kang, Y.J. (2010), "Nonlinear concrete model for double-skinned composite tubular columns", Constr. Build. Mater., 24(12), 2542-2553.
DOI
|
25 |
Hu, Y., Zhao, J.H. and Jiang, L.Q. (2017), "Seismic risk assessment of steel frames equipped with steel panel wall", Struct. Des. Tall. Spec. Build., 26(10), 1-12.
|
26 |
Ibarra, L.F., Medina, R.A. and Krawinkler, H. (2005), "Hysteretic models that incorporate strength and stiffness deterioration", Earthq. Eng. Struct. Dyn., 34(12), 1489-1511.
DOI
|
27 |
Muhummud, T. (2004), "Seismic design and behavior of composite moment resisting frames constructed of CFT columns and WF beams", PhD. Thesis, Lehigh Univ., Bethlehem, PA.
|
28 |
Li, Y., Yin, Y.J., Ellingwood, B.R. and Bulleit W.M. (2010), "Uniform hazard vs. Uniform risks bases for performance-based earthquake engineering of light-frame wood construction", Earthq. Eng. Struct. Dyn., 39(11), 1199-1217.
DOI
|
29 |
Lignos, D.G. and Krawinkler, H.K. (2011), "Deterioration modeling of steel components in support of collapse prediction of steel moment frames under earthquake loading", J. Struct. Eng., 137(11), 1291-1302.
DOI
|
30 |
McKenna, F., Fenves, G. and Scott, M. (2013), "Computer program Open-Sees: Open system for earthquake engineering simulation", Pacific Earthquake Engineering Center, Univ. of California, Berkeley, CA. (http://opensees.berkeley.edu)
|
31 |
PEER/ATC (2010), Modeling and Acceptance Criteria for Seismic Analysis and Design of Tall Buildings, Report No. 72-1, Applied Technology Council. Redwood City, California.
|
32 |
Scott, H.D., Park, R. and Priestly, M.J.N. (1982), "Stress-strain behavior of concrete confined by overlapping hoops at low and high strain rates", J. Am. Concrete. Inst., 79(1), 13-27.
|
33 |
SEAOC (1999), Appendix I: Tentative Guidelines for Performance-based Seismic Engineering, Part A: Strength Design Adaption, Structural Engineers Association of California, Sacramento, California.
|
34 |
Sheet, I.S., Gunasekaran, U. and MacRae, G.A. (2013), "Experimental investigation of CFT column to steel beam connections under cyclic loading", J. Constr. Steel. Res., 86, 167-178.
DOI
|
35 |
Krawinkler, H. (1978), "Shear in beam-column joints in seismic design of steel frames", J. Struct. Eng., 15(3), 82-91.
|
36 |
Uenaka, K. and Kitoh, H. (2012), "Concrete filled double skin circular tubular members subjected to pure bending and centric compressive loading", Tub. Struct., XIV, 81-87.
|
37 |
Skalomenos, K.A., Hatzigeorgiou, G.D. and Beskos, D.E. (2015), "Modeling level selection for seismic analysis of concrete-filled steel tube/moment-resisting frames by using fragility curves", Earthq. Eng. Struct. Dyn., 44, 199-220.
DOI
|