• 한국지리정보학회지
• /
• 제11권2호
• /
• pp.85-92
• /
• 2008

본 연구는 KLAM_21을 활용한 바람형성기능 평가분석에 관한 연구로서 대구시를 사례대상지로 실제 도시공간상에서 지형조건과 토지이용에 따라 어떻게 바람이 유동하고 있는지를 살펴보았다. 먼저, 신천상류 가창골 일대의 계곡과 주변산지 경사면에서 형성된 찬공기는 신천상류를 따라 북쪽으로 유동되어 확장되고 있었으며, 시간이 경과함에 따라 찬공기의 양과 높이 그리고 유속 및 방향 등에 있어서도 점점 증가하는 추세를 보이고 있었다. 이는 이 지역의 공간적 특성이 찬공기가 생성되고 유동하는데 있어서 매우 양호한 조건을 가지고 있음을 알 수 있다. 한편, 앞산공원지역에서는 앞산공원일대를 가로지르는 고가도로와 바람의 유동을 방해하는 대규모의 아파트단지 밀집, 그리고 공원내의 건축물 등의 도시개발의 행위로 인하여 찬공기의 생성 및 유동이 크게 방해를 받고 있는 것으로 나타났으며, 찬공기의 양과 높이에 있어서도 미약하게 나타나고 있다. 결국, 바람길의 공간적 효과를 극대화시키기 위해서는 바람길생성의 기본 형태인 찬공기 형성 및 유동, 그리고 찬공기 축적 및 유지지역이 공간적으로 연계되어야 하며, 이러한 공간적 연계는 지역의 공간적 특성과 밀접한 관계가 있음을 알 수 있다.

• 한국식품저장유통학회지
• /
• 제18권4호
• /
• pp.481-487
• /
• 2011

본 연구는 냉풍건조 곶감과 천일건조 곶감의 이화학적 품질특성을 조사하였다. 반건시 및 건시 모두 수분함량과 수분활성도에 있어서 냉풍건조 곶감이 가장 낮은 값을 나타내었다. 조단백질은 유의적인 차이가 나타났으나, 조지방은 유의적인 차이가 나타나지 않았다. 조회분과 가용성무질소물 함량은 냉풍건조 곶감에서 다소 높게 나타났다. 꽂감의 가용성 고형물 함량은 반건시의 경우 냉풍건조 반건시, 건시가 각각 40.12 $^{\circ}Brix$, 52.29 $^{\circ}Brix$로 가장 높은 값을 나타내었다. 곶감의 색도는 L값(lightness), a값(redness) 및 b값(yellowness)에서는 냉풍건조 곶감이 전통곶감에 비해 상대적으로 색에 있어서는 낮은 값을 보여주어 어두운 색을 나타내었다. 조직감을 측정한 결과 반건시의 경우 조직감에 있어서 3개 시료구에서 유의적인 차이가 거의 없었으나, 건시의 경우 냉풍건조 곶감의 수분이 상대적으로 적어 hardness, gumminess, chewiness의 값이 상대적으로 다소 높게 나타났다. 유리당은 6개 시료구 모두 fructose와 glucose만 검출되었으며 유리 아마노산은 17종 함유되어 있었고, aspartic acid, glutamic acid 및 alanine 순으로 그 함량이 많았다. 냉풍건조 곶감이 천일건조에 의해 생산되는 전통 곶감보다 위생적이며 건조조건을 자유롭게 조절할 수 있기 때문에 건조기간을 획기적으로 단축할 수 있으며 균일한 품질의 우수한 곶감생산을 할 수 있을 것으로 생각된다.

• 동력기계공학회지
• /
• 제7권2호
• /
• pp.17-22
• /
• 2003

As side-by-side refrigerators came into existence, there has been a growing concern about the free%ins-up of the vital equipment in a walk-in freezer. Due to a bad performance, customers are experiencing too much frustration. In order to minimize the freezing phenomena, the numerical simulation has been performed on the characteristics of cold air flow in a side-by-side refrigerator. The flow field has been simulated with a standard $k-\varepsilon$ turbulent model and a SIMPLE algorithm based on the finite volume method. Through the results of the analysis of the pattern of cold air flow, finally the shape of outlet for cold air flow was modified. The present model was compared with the modified model. The latter was better than the former in minimizing the freezing phenomena.

• International Journal of Automotive Technology
• /
• 제3권1호
• /
• pp.41-46
• /
• 2002

Effect of secondary air injection (SAI) on hydrocarbon reduction has been investigated in a single cylinder Sl engine operating at cold-steady/cold-start conditions. The hydrocarbon emission and exhaust gas temperature with and without catalytic converter were compared with continuous and synchronized SAIs, which injected secondary air intermittently into exhaust port. Effects of SAI location, SAI pressure, SAI timing, and location of catalytic converter have been investigated and the results are compared for both SAls with base condition. At cold-steady condition, the rate of HC reduction increased as the location of SAI was closer to the exhaust valve for both synchronized and continuous SAls. The emission of HC decreased with increasing exhaust-A/F when it was rich, and was relatively insensitive when it was lean. The timing of SAI in synchronized SAI had significant effect on HC reduction and exhaust gas temperature and the synchronized SAI was found to be more effective in HC reduction and exhaust gas temperature compared to the continuous SAI . At cold-start condition, when the catalytic converter was located 20 cm downstream from the exhaust port exit, the catalytic converter warm-up period for both SAls decreased by about 50%, and the accumulated hydrocarbon emission during the first 120 s decreased about by 56% and 22% with the synchronized and continuous SAIs, respectively, compared to that of the base condition.

• 설비공학논문집
• /
• 제11권2호
• /
• pp.205-214
• /
• 1999

The objective of this paper is to investigate the thermal properties of TMA clathrate compound applicable to cold storage system for building air-conditioning. Especially, the test tube experiments are performed by comparing and analyzing the temperature of phase change, specific heat and subcooling characteristic according to the variation of density, temperature of heat source and charging quantity in TMA clathrate compound. The results are summarized as follows:1) $-15^{\circ}C$ is not proper as the temperature of heat source because the temperature of subcooling is above $8.3^{\circ}C$ 2) temperature of phase change is dropped as the temperature of heat source is lower, 3) the effect of subcooling suppression with about 8$^{\circ}C$ is confirmed when the temperature of heat source is $-10^{\circ}C$ in case of 26, 27, and 30wt%, while the temperature of subcooling is about $0^{\circ}C$ when the temperature of heat source is $-15^{\circ}C$ in case of 25, 26 and 30wt%. Thus, the effect of subcooling suppression is greater as the temperature of heat source is lower. Additionally, the concentrative study is needed on mass concentration causing the phase change without subcooling phenomenon when the temperature of heat source is $-15^{\circ}C$. Thus, it is concluded that TMA clathrate compound has enough thermal properties as the cold storage medium for building air-conditioning.

• 설비공학논문집
• /
• 제12권8호
• /
• pp.725-734
• /
• 2000

The objective of this paper is to investigate the thermal properties of TMA clathrate applicable to cold storage system for building air-conditioning. Especially, the test tube experiments are peformed by comparing and analyzing the temperature of phase change, specific heat and subcooling characteristic according to the variation of concentrations and temperature of heat source in TMA clathrate. The results are summarized as follows; 1) temperature of phase change is dropped as the temperature of heat source is lower, 2) the effect of subcooling suppression with about $9.3^{\circ}C$ is confirmed when the temperature of heat source is $-10^{\circ}C$ in case of 30wt%, while the temperature of subcooling is about $0^{\circ}C$ when the temperature of heat source is $-15^{\circ}C$ in case of 25, 29wt% and 30wt% . Thus, the effect of subcooling suppression is greater as the temperature of heat source is lower. Additionally, the concentrative study is needed on mass concentration causing the phase change without subcooling phenomenon when the temperature of heat source is $-15^{\circ}C$ Thus, it is concluded that TMA clathrate has proper properties as the cold storage medium for building air-conditioning.

• 설비공학논문집
• /
• 제23권11호
• /
• pp.747-753
• /
• 2011

The purpose of this study was to quantify the impact of the ventilation rate on heating and cooling energy consumption in a detached house. For it, a series of simulations for the application of the diverse ventilation rate (ACH) were computationally conducted for a prototypical detached residential building in the cold climate (Detroit, Michigan) and hot/humid climate (Miami, Florida) of USA. Analysis revealed that ventilation is a significant heat losing source in the cold climate; thus, the higher ventilation rate significantly increases the heating energy consumption and energy cost in the cold climate; while the impact on energy increase for heating and cooling energy consumption is similar in hot/humid climate with less significancy compared to cold climate. The research outcome of this study could be a fundamental data for determining the optimal ventilation rate in terms of indoor air quality, but also building energy performance well.

• Human Ecology Research
• /
• 제62권2호
• /
• pp.317-326
• /
• 2024

This study evaluated the thermal physiological and psychological responses elicited when wearing cold protective jackets with aerogel fillings in two cold environments, one without air velocities and one with air velocities (2.3 m·s-1), at an air temperature of 10℃. The participants were five healthy young males. Measures were taken of physiological parameters, blood pressure (BP), heart rate (HR), core temperature, oxygen uptake (Vo2), and microclimate (temperature and humidity). The psychological parameters evaluated were thermal and wetness sensation. No differences were observed in systolic blood pressure, heart rate, and oxygen intake between the conditions. At tympanic temperature, a significant difference was observed between the conditions during exercise (p<.05); . A significant difference was observed in the microclimate temperature of the clothing according to the airflow, and temperature changes in the chest and back revealed different patterns. Significant differences were observed in thermal sensation (whole body (p<.05), chest (p<.05), back (p<.01)) between airflow conditions. The results therefore indicate that cold protective jackets with an aerogel filling are suitable for people operating in low-temperature and airflow environments.

• 한국정밀공학회지
• /
• 제17권10호
• /
• pp.155-161
• /
• 2000

Recently, environmental pollution has become a big problem in industry and many researches have been done in order to preserve the environment. In the grinding process, the coolant has great influence on environment. It contains several chemicals(sulfur, phosphorus and chlorine) to improve the grinding efficiency. If these additives go into the workplace atmosphere, it is harmful for workers. It can also cause the environment pollution. Because of these reasons many studies have been done to minimize the amount of coolant. However the small amount of coolant can cause the thermal defect on the ground surface layer. This study forced the effects of the compressed cold air when the spindle shaft materials(SCM4 & SCM21) were cylindrical ground with WA wheel. The compressed cold air was used as the coolant and grinding performance was compared with that of the conventional grinding fluids(emulsion). Many experiments were carried out with these two cooling materials. The surface roughness, residual stress, and roundness were measured for the cylindrical grinding. The test results showed that the compressed cold air was very useful as the cooling materials for grinding process. It was also efficient to minimize the thermal defects of workpiece and could also play a role in solving environmental pollution.

• Journal of Biosystems Engineering
• /
• 제33권3호
• /
• pp.167-172
• /
• 2008

The objective of this study was to investigate the adequate storage method that was able to maintain the high quality of rough rice according to storage methods and period. The quality change of the rough rice during the storage period was evaluated by storage method such as cooling bin using winter cold air, ordinary temperature bin, freezing, refrigeration and indoor storage. Moisture content, brown rice whiteness, hardness, crack ratio and germination ratio were measured in this study. Moisture content of rough rice stored in cooling bin using winter cold air and ordinary temperature bin were decreased by 0.07% and 0.42%, respectively, which were lower than the other storage method. The hardness of brown rice increased in order of storage method such as winter cooling bin, normal bin, freezing storage, refrigeration storage and indoor storage. Crack ratio by indoor and ordinary temperature bin storage were increased by 2.68% and 3.63%, respectively, whereas cooling bin using winter cold air, refrigeration and freezing storage showed below 1.0%. The highest germination rate was found in cooling bin using winter cold air. As a result, cooling bin using winter cold air can be evaluated for the adequate storage method of rough rice.