• Journal of Radiation Protection and Research
• /
• 제10권2호
• /
• pp.130-136
• /
• 1985

전자포획 핵종인 $^{133}Ba$ 용액의 방사능 측정이 ${\beta}-{\gamma}$ 동시계수 방법에 의하여 수행되었다. $4{\pi}$ 비례계수기와 두개의 NaI(Tl) 섬광검출기를 사용하여 베타, 감마 및 동시계수 채널에서 계수율을 측정하였다. 효율외삽법으로 산출된 용액의 비 방사능은 기준시간(1984년 3월 15일 0시, UT)에 대하여 $(1151.01{\pm})2.99)\;kBq{\cdot}g^{-1}$이었다. 국제도량형국이 주관한 방사능 측정의 국제비교에 의하면, 이 결과는 그 비교에서 얻어진 평균값에 대하여 약 0.84%의 차이를 나타냈다.

• 한국광학회지
• /
• 제14권2호
• /
• pp.116-121
• /
• 2003

매개하향변환과정에서 발생한 광자쌍과 Hong-Ou-Mandel 간섭계를 이용한 4차 간섭실험에서 비고전적인 간섭효과를 관측하였다. 편광방향이 서로 수직인 두 광의 4차 간섭에서 간섭무늬의 선명도가 고전적인 한계인 50%를 넘는 최대 85%의 간섭무늬를 관측하였다. 또한 두 빔의 세기 비율이 증가할수록 간섭무늬의 선명도가 감소하는 고전적인 간섭현상과 달리 두 광의 세기 비율이 1:10인 경우에도 83%의 선명도를 갖는 간섭효과를 측정하였다.

• 대한공간정보학회지
• /
• 제10권1호
• /
• pp.77-82
• /
• 2002

지형공간정보시스템(GSIS)을 지적 전산화작업에 적용하기 위해 지적정보를 수치 전산화하여 토지대장의 On-Line시스템화에 운용할 수 있도록 시도하는데 의의가 있다. 그리고 지적정보의 D/B 구축을 위해 연구대상 지를 일부 선정하여 지적측량 시 D/B 화할 수 없는 지적 불부합지를 일반측량에 의한 현황도와 항공사진측량에 의해 제작된 GSIS 도면을 이용하여 실지 지적기초점을 내려 현황 측량한 성과에 의해 비교 분석하고 그 상관성을 해석함으로써 장래 지적 정보 D/B 구축 시 측량기법의 정확도 향상을 도모하고자 하는데 그 목적이 있다.

• 한국의사학회지
• /
• 제25권2호
• /
• pp.113-120
• /
• 2012

Objective : Academies or societies of Korean Medicine have their journals. Those Journals usually follow guidlines for authors of Journal of KOMS(Korean oriental medical society). However, altough academies or societies of Korean Medicine are branches of KOMS, their guidlines for authors of journal are different form KOMS's. Method : We compared guidlines for authors in academies or societies of Korean Medicine which journals is listed in NRF(National Research Foundation of Korea). Result : They have 78.9% coincidence in guidlines for authors of journal, 68.4% in url adress and 57.9% in both books and chapter. Conclusion : Academies or societies of Korean Medicine might comply with KIOM in guidlines for authors of their journal because they are brabches of KIOM. In addition, these days, scholars try to make journal DB, journal referaence DB, ontology and so on so journals of KIOM and journals of Korean Medicine academies might be agreed especially in guidlines for authors.

• Journal of Audiology & Otology
• /
• 제24권4호
• /
• pp.174-179
• /
• 2020

Background and Objectives: The integration of auditory-visual speech information improves speech perception; however, if the auditory system input is disrupted due to hearing loss, auditory and visual inputs cannot be fully integrated. Additionally, temporal coincidence of auditory and visual input is a significantly important factor in integrating the input of these two senses. Time delayed acoustic pathway caused by the signal passing through digital signal processing. Therefore, this study aimed to investigate the effects of hearing loss and hearing aid digital delay circuit on sound-induced flash illusion. Subjects and Methods: A total of 13 adults with normal hearing, 13 with mild to moderate hearing loss, and 13 with moderate to severe hearing loss were enrolled in this study. Subsequently, the sound-induced flash illusion test was conducted, and the results were analyzed. Results: The results showed that hearing aid digital delay and hearing loss had no detrimental effect on sound-induced flash illusion. Conclusions: Transmission velocity and neural transduction rate of the auditory inputs decreased in patients with hearing loss. Hence, the integrating auditory and visual sensory cannot be combined completely. Although the transmission rate of the auditory sense input was approximately normal when the hearing aid was prescribed. Thus, it can be concluded that the processing delay in the hearing aid circuit is insufficient to disrupt the integration of auditory and visual information.

• 대한방사선치료학회지
• /
• 제16권2호
• /
• pp.33-41
• /
• 2004

목적 : 선형가속기의 정도관리 항목 중 광조사야와 방사선조사야의 일치성 검사는 기존에 필름을 이용하여 측정하였다. 하지만 필름을 이용한 측정은 측정관찰자에 따라 오차가 크게 발생하여 이를 개선하기 위해 BIS(Beam Image System) 영상장치를 이용하여 필름과 조사야 일치성을 비교평가 하고자 하였다. 대상 및 방법 : 선형가속기를 이용하여 필름과 BIS 영상장치에 6, 15MV의 광자선을 조사하여 측정하였다. 조사야는 각각 $50{\times}50,\;100{\times}100,\;200{\times}200mm^2$지었고, 갠트리 각도는 필름을 사용시 $0^{\circ}$에서 측정하였고, BIS 영상장치를 사용시에는 $0^{\circ}$와 $270^{\circ}$에서 측정하였다. 그리고 조사야 일치성 측정은 필름을 사용시 눈금자와 필름 스캐너를 이용하였고, BIS 영상장치에서는 스캔된 광조사야와 방사선조사야의 폭을 X축과 Y축으로 각각 측정하여 그 오차값을 구하였다. 결과 : 필름을 이용한 관찰자의 시각적인 측정에서는 광조사야보다 방사선조사야가 더 크게 측정되었으며, 최대 1.9mm의 오차값을 보였다. 필름 스캐너를 이용한 측정에서도 방사선조사야가 더 크게 측정되었으며, 평균 오차값의 크기는 더 작은 값을 보였다. BIS 영상장치를 이용한 측정에서는 필름 사용시와는 반대로 갠트리 $0^{\circ}$와 $270^{\circ}$에서 광조사야가 방사선조사야보다 더 크게 측정되었고, 최대 0.96mm의 오차값을 보였다. ${\Delta}X$, Y축 모두 허용오차의 범위는 $<{\pm}2mm$로 나타났다. 측정된 평균 ${\Delta}X$, Y 오차값은 시각적인 필름측정, 필름스캐너 측정, BIS 순으로 작게 나타났다. 결론 : 본 연구의 측정결과, 필름을 이용한 시각적인 조사야 일치성 평가시에는 관찰자에 따른 측정오차의 값이 크게 나타날 수 있으므로 정확한 정도관리를 위해서는 세심한 주의로 측정할 것과 필요하다면 다른 영상장치의 도움이나 측정도구의 개발로 정확한 측정이 필요하다 하겠다.

• Journal of Radiation Protection and Research
• /
• 제18권1호
• /
• pp.63-70
• /
• 1993

$^{125}I$가 0.035 MeV 준위로 붕괴할 때 K-각 전자포획붕괴에 의한 K-각 이중 이온화 현상에 대하여, 이중 vacancy가 채워지면서 방출되는 $K_{\alpha}^{II}$ X-선과 $K_{\alpha}^s$X-선을 동시계수하여 연구 분석하였다. 실험에 사용한 source는 $^{125}I$차 $^{125}Te^m$의 혼합시료이다. 한 대의 Ge(Li)검출기, 두 대의 NaI(T1)섬광검출기와 TPHC(Time-to-Pulse Height Converter)를 사용하여 동시스펙트럼을 분석한 다음 측정된 동시계수 $N(K_{\alpha}^{II},\;K_{\alpha}^s)$과 $K_{\alpha}$ X-선의 총 수인 $N(K_{\alpha})$을 얻었다. K-자 전자포획 당 이중 Vacancy가 형성될 때의 이중 이온화 확률 $P_{KK}$값, $2.15{\times}10^{-4}$을 구하였다.

• Journal of Biosystems Engineering
• /
• 제28권3호
• /
• pp.231-238
• /
• 2003

Rose and chrysanthemum are the most popular flowers in Korean floriculture. Sorting flowers is a labor intensive operation in cultivation of the cut flowers and needed to be mechanized. Machine vision is one of the promising solutions for this purpose. This study was carried out to develop hardware and software of a cut flower sorting system using machine vision and to test its performance. Results of this study were summarized as following; 1. Length of the cut flower measured by the machine vision system showed a good correlation with actual length of the flower at a level of the coefficients of determination (R$^2$) of 0.9948 and 0.9993 for rose and chrysanthemum respectively and average measurement errors of the system were about 2% and 1% of the shortest length of the sample flowers. The experimental result showed that the machine vision system could be used successfully to measure length of the cut flowers. 2. Stem diameter of the cut flowers measured by the machine vision system showed a correlation with actual diameter at the coefficients of determination (R$^2$) of 0.8429 and 0.9380 for rose and chrysanthemum respectively and average measurement errors of the system were about 15% and 7.5% of the shortest diameter of the sample flowers which could be a serious source of error in grading operation. It was recommended that the error rate should be considered to set up grading conditions of each class of the cut flowers. 3. Bud maturity of 20 flowers each judged using the machine vision system showed a coincidence with the judgement by inspectors at ranges of 80%∼85% and 85%∼90% for rose and chrysanthemum respectively. Performance of the machine vision system to judge bud maturity could be improved through setting up more precise criteria to judge the maturity with more samples of the flowers. 4. Quality of flower judged by stem curvature using the machine vision system showed a coincidence with the judgement by inspectors at 90% for good and 85% for bad flowers of both rose and chrysanthemum. The levels of coincidence was considered as that the machine vision system used was an acceptable system to judge the quality of flower by stem curvature.

• 대한방사선치료학회지
• /
• 제11권1호
• /
• pp.43-48
• /
• 1999

Purpose : For practical application of the MR image for stereotactic radiosurgery, the target point achieved by acquisition of MR image in a relatively homogeneous phantom has to agree with the actual isocenter of irradiation in real radiosurgery and the amount of distortion of the MR image should be known. Materials and Methods : A dosimetric film with a random target point was inserted into a radish vertically and horizontally on axis Z and they were fixed with a headring. After image acquisition by stereotactic radiosurgery planning system, we achieved stereotactic coordinate of the target point and examined irradiation using the coordinate acquired as isocenter. After the irradiation, the film in the radish was developed and processed and the degree of coincidence between the target point marked on the film and the center of the radiation distribution. In order to measure the degree of distortion of the MR image in a different way, an acryl phantom was made and punctures were made at intervals of 1 cm and a drop of oil was dropped into it. Then, it was inserted into the radish vertically and horizontally on axis Z to acquire the MR image. Each coordinate was achieved and the estimation of distortion of MR image was made both in vertical and horizontal directions Results : The film from the radio was developed and for the one inserted vertically on axis Z, there was a good coincidence in the discrepancy between the target point marked on the film and the center of the radiation distribution. For the one inserted horizontally, the discrepancy between them was under 0.5 mm. As a result of estimating distortion of MR image using acryl, the discrepancy was under 0.45 mm in the case of the phantom inserted vertically on axis Z, and that of the one inserted horizontally was 1.4 mm. Conclusion : We were able to confirm good coincidence in homogeneous phantom in actual treatment position of radiosurgery using the MR image and the discrepancy measured in the analysis of distortion of the MR image did not exceed the permissible level. Therefore, it was evident the system of the hospital is suitable for radiosurgery using MR image.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.250-254
• /
• 2002

Intergranular corrosion of austenitic stainless steels is a conventional and momentous problem during welding and high temperature use. One of the major reasons for such intergranular corrosion is so-called sensitization, i.e., chromium depletion due to chromium carbide precipitation at grain boundaries. Conventional methods for preventing sensitization of austenitic stainless steels include reduction of carbon content in the material, stabilization of carbon atoms as non-chromium carbides by the addition of titanium, niobium or zirconium, local solution-heat-treatment by laser beam, etc. These methods, however, are not without drawbacks. Recent grain boundary structure studies have demonstrated that grain boundary phenomena strongly depend on the crystallographic nature and atomic structure of the grain boundary, and that grain boundaries with coincidence site lattices are immune to intergranular corrosion. The concept of "grain boundary design and control", which involves a desirable grain boundary character distribution, has been developed as grain boundary engineering. The feasibility of grain boundary engineering has been demonstrated mainly by thermomechanical treatments. In the present study, a thermomechanical treatment was tried to improve the resistance to the sensitization by grain boundary engineering. A type 304 austenitic stainless steel was pre-strained and heat-treated, and then sensitized, varying the parameters (pre-strain, temperature, time, etc.) during the thermomechanical treatment. The grain boundary character distribution was examined by orientation imaging microscopy. The intergranular corrosion resistance was evaluated by electrochemical potentiokinetic reactivation and ferric sulfate-sulfuric acid tests. The sensitivity to intergranular corrosion was reduced by the thermomechanical treatment and indicated a minimum at a small roll-reduction. The frequency of coincidence-site-lattice boundaries indicated a maximum at a small strain. The ferric sulfate-sulfuric acid test showed much smaller corrosion rate in the thermomechanically-treated specimen than in the base material. An excellent intergranular corrosion resistance was obtained by a small strain annealing at a relatively low temperature for long time. The optimum parameters created a uniform distribution of a high frequency of coincidence site lattice boundaries in the specimen where corrosive random boundaries were isolated. The results suggest that the thermomechanical treatment can introduce low energy segments in the grain boundary network by annealing twins and can arrest the percolation of intergranular corrosion from the surface.