• 열처리공학회지
• /
• 제28권4호
• /
• pp.171-180
• /
• 2015

The variation in microstructure and texture during continuous annealing was examined in a series of 1.6% Mn-0.1% Cr-0.3% Mo-0.005% B steels with carbon contents in the range of 0.010 to 0.030%. It was found that microstructure of hot band consisted of ferrite and pearlite as a consequence of high coiling temperature, and eutectoid carbon content was between 0.011% and 0.016%. Martensite ranged in volume fraction from 1.5% to 4.0% when annealed at $820{\circ}C$ according to the typical continuous annealing cycle. The critical martensite content for the continuous yielding was about 4% from stress-strain curves. The continuous yielding was obtained in the 0.030% carbon steel and 0.010% to 0.020% carbon steels revealed some yield point elongation ranging from 0.8% to 2.2% in as-annealed conditions. Higher tensile strength in the higher carbon steel is due to both increase in the martensite volume fraction and ferrite grain refinement. Decreasing the carbon content to 0.01% strengthened the intensities of ${\gamma}$-fiber textures, resulting in the increase in the $r_m$ value, which was caused by the lower volume fraction of martensite. The higher carbon steels showed the lower $r_m$ value of about 1.0.

• Food Science and Biotechnology
• /
• 제16권4호
• /
• pp.543-548
• /
• 2007

Low-energy processing technology, which enhances the utility of defatted soybean flour (DSF), was developed using extrusion processing. DSF was extruded at different conditions using a twin screw extruder and then, dried at $40^{\circ}C$ for 20 hr. The nitrogen solubility index (NSI), viscosity, water solubility index (WSI), and water absorption index (WAI) of DSF increased after extrusion processing. The density of DSF extrudates decreased with the decrease in water content from 53 to 33% and the increase in extrusion temperature from 110 to $160^{\circ}C$. The addition of NaOH from 1.2 to 1.8% and citric acid from 1 to 5% increased the total solubility (TS) of DSF due to the decrease of protein coiling and hydrophobic bonds formation during extrusion processing. When viscozyme was reacted first, TS, NSI, and soluble carbohydrate content of DSF hydrolysates increased about 12, 6, and 7%, respectively, compared to them reacted with protease first. The TS and NSI of DSF hydrolysates were increased about 15 and 10%, respectively, by extrusion processing at alkaline and acidic pH. Extrusion processing at alkaline and acidic pH contributed the increase of efficiency to hydrolyze DSF samples using enzyme.

• 한국초전도ㆍ저온공학회논문지
• /
• 제16권4호
• /
• pp.49-52
• /
• 2014

REBCO coated conductor (CC) tapes with superior mechanical and electromechanical properties are preferable in applications such as superconducting coils and magnets. The CC tapes should withstand factors that can affect their performance during fabrication and operation of its applications. In coil applications, CC tapes experience different mechanical constraints such as tensile or compressive stresses. Recently, the critical current ($I_c$) degradation of CC tapes used in coil applications due to delamination were already reported. Thermal cycling, coefficient of thermal expansion mismatch among constituent layers, screening current, etc. can induce excessive transverse tensile stresses that might lead to the degradation of $I_c$ in the CC tapes. Also, CC tapes might be subjected to very high magnetic fields that induce strong Lorentz force which possibly affects its performance in coil applications. Hence, investigation on the delamination mechanism of the CC tapes is very important in coiling, cooling, operation and design of prospect applications. In this study, the electromechanical properties of REBCO CC tapes fabricated by reactive co-evaporation by deposition and reaction (RCE-DR) under transversely applied loading were investigated. Delamination strength of the CC tape was determined using the anvil test. The $I_c$ degraded earlier under transverse tensile stress as compared to that under compressive one.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.264-268
• /
• 2005

Most of the train brakes depends on friction between wheels and tracks. This requires braking force reduced in order not to cause wheel slides since the friction decreases as the train speed increases and consequently results in extension of braking distance. The braking system called 'Linear eddy current brake' or simply' Eddy current brake' is a braking system for making a brake independent from friction, which consists in creating electromagnet by coiling around shoes attached. to bogies; having the shoes above the tracks approached to the tracks upon acknowledgement of a braking command; and authorizing braking force that is irrelevant to friction through magnetic repulsion between electromagnet attached to the tracks and train set by the use of the electromagnet's magnet field characteristics. An electromagnetic attraction braking system that consists in pressing pole shoes attached to bogies against the tracks by using electromagnet's attraction force is called 'Electromagnetic track brake' or simply 'Track brake'. This paper has been prepared in purpose of studying technological tendencies of the eddy current brake and the track brake so that it can be utilized as fundamental data for commissioning Korean high-speed trains with the eddy current brake hereafter.

• 한국광학회지
• /
• 제29권4호
• /
• pp.159-165
• /
• 2018

본 논문에서는 3단으로 구성된 전광섬유(all-fiber) Master Oscillator Power Amplifier (MOPA) 구조의 협대역 이터븀 첨가 편광 유지 광섬유 레이저 증폭에 대해 보고한다. 편광유지 단일모드 출력은 85%의 기울기 효율을 가지는 400 W 출력을 얻을 수 있었고, 레이저 반치폭은 2.5 GHz였다. 더불어, 이득매질 광섬유를 11 cm 지름으로 코일링하여 모드 불안정성을 완화할 수 있었다. 추가적으로 레이저 출력 증가를 위한 방법들에 대해 논하였다.

• 보존과학연구
• /
• 통권28호
• /
• pp.105-119
• /
• 2007

Restoration of earthenware is largely composed of selection of clay, making(forming), and firing. This study lays emphasis on the making method and open-air firing. For making methods, This study used coiling method partly with priority given to ring method. The most significant feature of this restoration work is the making method of tap-forming, in which 외박자(out tap instrument) and 내박자(inter tap instrument) would be tapped and formed. For firing, This study used open-air firing method in the most primitive way. This method needs no special device and equipment and makes the work more simple and easy. The previous study was on the making method by archeological and preservation-scientific research but this study emphasized the restoration work in an actual earthenware maker's position. Through the result of this study, This study wish this would be an opportunity to present another model of various restoration methods for other researchers those who wanted to participate in the restoration and openair firing.

• 전력전자학회논문지
• /
• 제10권6호
• /
• pp.618-625
• /
• 2005

본 논문은 CRT 표시장치에서 고전류밀도를 구현하기 위한 전자총의 히터와 캐소드의 최적의 저전력설계와 실험을 수행하였다. CRT 표시장치에서 밝기, 고휘도, 고해상도와 대화면화를 위해서는 전자총 캐소드(cathode)의 고전류밀도가 필수적이다. 이를 위해서는 함침형 캐소드가 사용되며, 고전류밀도를 얻기 위해 히터의 동작온도를 높여야하는데 이에 비례하여 소비전력도 증가한다. 본 논문에서는 고전류밀도 캐소드 히터의 저전력 설계를 위하여 히터의 리드형태(Lead Type), 코팅(Coating)법, 발열부의 1차 및 2차 코일링의 피치와 권선수를 달리한 샘플을 제작, 시험하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 방전 플라즈마 유기절연재료 초전도 자성체연구회
• /
• pp.161-164
• /
• 2004

변압기는 권선방법에 따라 많은 특성의 변화를 나타내게 되는데 일반적인 동선의 권선법과 코일형태로 동판을 가공하여 사용하는 평면 권선방법, 그리고 고전류용 변압기에 이용되는 것으로 코어의 권선창 표면을 감싸는 형태의 관형 권선방법의 3가지의 코일 형태 또는 권선방법에 따른 변압기의 특성 변화와 컨버터에 채용되었을 때의 전력효율에 대하여 고찰하였다. 평면 코일을 이용한 변압기는 높은 코일간의 결합도로 인해 가장 낮은 누설인덕턴스와 가장 높은 성능지수 및 결합계수를 나타내었고, 관형코일을 이용한 변압기는 높은 누설특성으로 인해 가장 낮은 성능지수와 결합계수를 나타내었다. 그리고 이들을 DC-DC 컨버터에 채용하여 분석한 결과 평면변압기가 가장 높은 효율을 발휘하였다. 관형변압기는 저전력에서는 높은 누설량으로 인해 효율이 상대적으로 낮지만 출력전력이 증가할수록 상승하는 발열량에 대한 방열효과가 높아 효율의 감소폭이 작아서 고주파 또는 대전류용 변압기 응용이 기대된다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.321-324
• /
• 2005

The main purpose of the present study has been placed on investigating the effects of controlled rolling and cooling on the microstructures and mechanical properties of C-Si-Mn-V steels for cold forming. The steels were manufactured in vacuum induction melting(VIM) furnace and casted to 1.1ton Ingots and the ingots were forged to $\Box150$ billet. The forged billets were reheated in walking beam furnace and rolled to coil, the stocks were rolled by Controlled Rolling and Cooling Technology (CRCT), so rolled at low temperature by water spraying applied in rolling stage and acceleratly cooled before coiling. Rolled coils were cold drawed to the degree of $27\%$ of area reduction without heat treatment. Microstructual observation, tensile test, compression test and charpy impact tests were conducted. The mechanical properties of the steels were changed by area reduction of cold drawing and it is founded that there are optimum level of cold drawing to minimize compression stress for these steels. From the result of this study, it is conformed that mechanical properties and microstructure of C-Si-Mn-V steels for cold forming were enhanced by accelerated cooling and founded optimum level of cold drawing.

• 한국지반신소재학회논문집
• /
• 제15권3호
• /
• pp.1-12
• /
• 2016

본 논문에서는 지열 활용시스템을 지반구조물에 적용시 발생하는 주변 지반에 부과되는 다양한 온도 및 온도변화 사이클이 흙의 역학적 특성에 미치는 영향에 대한 내용을 다루었다. 이를 위해 화강풍화토를 대상으로 다양한 온도변화 조건을 구현하고 이에 따른 흙의 입자구조 및 열전도특성 변화 경향을 고찰하였다. 아울러 다양한 OCR(over consolidation ratio)값을 가지는 시료를 제작하여 내부 온도를 $20^{\circ}C{\sim}70^{\circ}C$까지 변화시키며 온도상승과 가열-냉각 반복작용 횟수에 따른 흙에 미치는 영향을 분석하고자 온도계로 압축셀 내부 온도를 측정하였으며 비배수 실험을 통해 시료에 작용하는 축차응력 및 간극수압을 측정하여 온도변화가 화강풍화토에 미치는 영향을 분석하였다. 그 결과 온도상승과 가열-냉각 반복 작용으로 인해 간극수압이 증가하며 축차응력 또한 감소하는 것으로 관찰되었다.