• Progress in Superconductivity
• /
• 제14권2호
• /
• pp.106-109
• /
• 2012

Superconducting sensors and detectors have been applied to many fields or beginning to enter the maturing stage. The applications spread over a wide range of fields such as radio telescope, medical examination, quantum information, contamination inspection, materials analysis, etc. For users of the superconducting devices as well as developers, we have to avoid confusion of naming, graphical circuit symbols, and measurement methods for device performance. We are trying to formulate international standards under the International Electrotechnical Commission - Technical Committee 90 (IEC-TC90), which is responsible for superconductivity. The sensors and detectors to be considered are divided into two groups: coherent sensors (SQUID, SIS mixers, etc.) and direct detectors (TES, STJ, MKID, SSPD, etc.).

• Bulletin of the Korean Chemical Society
• /
• 제24권8호
• /
• pp.1075-1080
• /
• 2003

We have investigated femtosecond coherent vibrational motions of Zn(II)-5,15-diphenylporphyrin in toluene using chirp-controlled ultrashort pulses. The oscillatory features superimposed on the temporal profiles of the pump-probe transient absorption signal are affected by the chirping and energy of excitation pulses. Using chirp- and excitation energy-controlled femtosecond pulses, we are able to obtain information on the structural changes between the electronic ground and excited states based on a comparative analysis of the Fouriertransformed frequency-domain spectra retrieved from the oscillatory components with the ground state resonance Raman spectra and normal mode calculations.

• 한국생물정보학회:학술대회논문집
• /
• 한국생물정보시스템생물학회 2002년도 제1차워크샵
• /
• pp.139-152
• /
• 2002

Gene-shaving(Hastie et al, 2000) is a very useful method to identify a meaningful group of genes when the variation of expression is large. By shaving off the low-correlated genes with the leading principal component, the primary genes with the coherent expression pattern can be identified. Gene-shaving method works well If expression levels are varied enough, but it may not catch the meaningful cluster in low expression level or different expression time even with coherent patterns. The sliding window gene-shaving method which is to apply gene-shaving in each sliding window after hierarchical clustering is to compensate losing a meaningful set of genes whose variation is not large but distinct. The performance to identify expression patterns is compared for the simulated profile data by the different variance and expression level.

• 대한기계학회논문집B
• /
• 제20권10호
• /
• pp.3355-3360
• /
• 1996

To provide standard data of temperature and species concentration in a flame for calibrating the laser based combustion diagnostics, we investigated combustion characteristics of a flat flame burner(Mckennar Product). For various stoichiometric ratios we measured temperature and concentration of OH in the premixed methane/air flame with Coherent anti-Stokes Raman spectroscopy and laser induced fluorescence technique, respectively. Assuming the chemical equilibrium condition at the measured temperature, the mole fraction of the OH radical in the flame was obtained and compared with numerical analysis.

• Journal of Advanced Marine Engineering and Technology
• /
• 제15권3호
• /
• pp.45-56
• /
• 1991

This paper describes characteristics of the flow pattern of the flow past a rectangular cylinder experimentally investigated. The width-to-length ratio of the section varried from 2 to4. For the statistical treatment, autocorrelation coefficient, probability density function and power spectral density function are obtained by the digital processing technic through on-line system with a hot wire anemometer. As a results, it was found that strong periodic coherent eddies structure is sustained to about 20H downstream from the cylinder. And nearer the cylinder in the wake, the number of turbulent eddies of a large scale coherent structure are comparatively much more dominant than that of a small scale one. By the analysis of power spectrum, It was cleared that there exists a certain range of the width to length ratio between 2.5 and 3 of which the flow pattern changes abruptly with a sudden discontinuity in Strouhal number.

• 제어로봇시스템학회논문지
• /
• 제18권1호
• /
• pp.47-53
• /
• 2012

In cellular geo-location systems, positioning performance is influenced by hearability of receivers. Hearability can be enhanced by using long integration at the receiver. When unknown residual frequency remains in baseband signals, however, the coherent integration loss increases as the residual frequency becomes larger. Consequently, length of coherent integration is determined by the residual frequency. By precise estimation and compensation of the residual frequency, integration length can be enlarged. This paper presents a residual frequency estimator for WiBro geo-location and analyzes its performance in multipath environment. By computer simulation, an optimal receiver structure to enhance the hearability of WiBro geo-location is proposed.

• 조명전기설비학회논문지
• /
• 제21권4호
• /
• pp.96-103
• /
• 2007

In this paper, we present a novel and numerically efficient algorithm for high resolution TOA(Time Of Arrival) estimation under indoor radio propagation channels. The proposed algorithm is not dependent on the structure of receivers, i.e, it can be used with either coherent or non-coherent receivers. The TOA estimation algorithm is based on a high resolution frequency estimation algorithm of Minimum-norm. The efficiency of the proposed algorithm relies on numerical analysis techniques in computing signal or noise subspaces. The algorithm is based on the two step procedures, one for transforming input data to frequency domain data and the other for estimating the unknown TOA using the proposed efficient algorithm. The efficiency in number of operations over other algorithms is presented. The performance of the proposed algorithm is investigated by means of computer simulations.. Throughout the analytic and computer simulation results, we show that the proposed algorithm exhibits superior performance in estimating TOA estimation with limited computational cost.

• 한국소음진동공학회논문집
• /
• 제14권10호
• /
• pp.930-938
• /
• 2004

This paper presents the noise source identification of a car A/V system. There are two different kinds of noise sources noise generated by loading mechanism and rattle noise by externally forced vibration. A dynamometer has been made to produce stationary inertia to the loading mechanism of A/V system. Sound pressure spectra and sound intensity were measured by operating the dynamometer setup as various motor speeds, and the results were analyzed. A dominant rattle noise source about A/V system's components has been found by multi-dimensional spectral analysis. Residual spectrum method was applied for eliminating coherence between the vibration sources. In result, the dominant rattle noise source was identified by partial coherent output spectrum of individual vibration component.

• 한국항행학회논문지
• /
• 제7권1호
• /
• pp.6-13
• /
• 2003

본 논문에서는 3GPP HSDPA 모뎀용 비동기식 동기추적회로를 설계하고, 설계된 동기추적회로에 대하여 정상상태 지터 분산과 타이밍 에러의 과도응답 특성을 이론적으로 분석하였다. 우선 AWGN 환경에서의 지터 분산을 펄스성형 필터, 타이밍 오프셋, 신호 대 잡음비, 루프 대역폭에 대한 식으로 유도하였으며, 과도응답 특성 또한 이론적으로 해석하였다. 끝으로 설계된 동기추적회로의 성능을 컴퓨터 시뮬레이션을 통하여 확인하였다.

• Current Optics and Photonics
• /
• 제8권1호
• /
• pp.56-64
• /
• 2024

In response to the current situation where general methods cannot effectively compensate for the phase delay of ordinary optical mixers, a multi-layer spatial beam-splitting optical mixer is designed using total reflection triangular prisms and polarization beam splittings. The phase delay is generated by the wave plate, and the mixer can use the existing parallel plates in the structure to individually compensate for the phase of the four output beams. A mixer model is established based on the structure, and the influence of the position and orientation of the optical components on the phase delay is analyzed. The feasibility of the phase compensation method is simulated and analyzed. The results show that the mixer can effectively compensate for the four outputs of the optical mixer over a wide range. The mixer has a compact structure, good performance, and significant advantages in phase error control, production, and tuning, making it suitable for free-space coherent optical communication systems.