• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.1
• /
• pp.34-41
• /
• 2010

In this paper, we analyze and simulate co-channel interference (CCI) mitigation method for cooperative communication systems employing decode-and-forward relays. In co-channel interference mitigation method, A source transmits signals that are encoded by orthogonal code. Then, the receiver can distinguish its own signals form the received signals by using the orthogonal code which is already known to the receiver. The orthogonal codes applied to this paper are orthogonal Gold codes. However, we can employ other codes, which have orthogonality, as the orthogonal code. In addition, we utilize a space time block coding (STBC) scheme for enhancing the system performance by obtaining additional array gain.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.9
• /
• pp.2470-2480
• /
• 1996

The energy efficiency and bandwidth efficiency are two important criterion in designing a modulation scheme Especially the constant envelope property must be considered as in the non-linear channel tht exit, for example in the nonlinear amplifiers for satellite repeater. The Q$^{2}$AM(Quadrature Quadrature Amplitude Modulation) is a new modulation scheme which combines the Q$^{2}$PSK(Quadrature Quadrature Phase Shift Keying) scheme which increases the signal space dimension and the QAM scheme which increases the bandwidth efficiency using the multi-level signal. The Q$^{2}$AM scheme has by far superior spectrum efficiency compared with the existing modulation schemes. Applying this scheme in the non-linear communication system increses the bandwidth efficiency but cannot envelop property. In this paper, a new system architecture is suggested which satisfies the large spectrum efficiency and constant envelope property by implementing the linear block coding prior to the Q$^{2}$AM modulation. the system has improved in performance by gaining the constant envelope and the additional coding gain. We able to observe the performance improvement of the suggested system(at BER=10$^{-5}$ ) of 4.4 dB for the 16-QAM and 0.7 dB for the Q$^{2}$PSK under the exact spectrum efficiency.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.3 no.3
• /
• pp.170-176
• /
• 2008

According to the development of Internet, DWDM system needs to improve the performance for long distance transmission international optical signals. For higher the transmission capacity, we have to raise the transmission speed and increase a number of channels. To make qualifications, there are a lot of technologies such as line coding, modulation, precious fiber, broadband amplification, dispersion and forward error correction. Especially, FEC has been considered as a progressive technology for long distance transmission to carry out high speed and large capacity traffic. This paper introduced the progress of each new generation of FEC and the way to employ by current system analyzed the coding gain.

• The Journal of the Korea Contents Association
• /
• v.9 no.4
• /
• pp.12-18
• /
• 2009

In this paper, we propose a novel method which efficiently codes $4{\times}4$ intra prediction modes in H.264/ AVC video encoding. There are nine optional prediction modes for each $4{\times}4$luma block and 4 modes for each $16{\times}16$luma block. To code each $4{\times}4$ intra prediction mode, lots of bits are required. To efficiently compress the intra mode bits in H.264/AVC, the most probable mode(MPM) is estimated by using the intra modes of the adjacent blocks, since intra modes for neighboring $4{\times}4$luma blocks are correlated. In this paper, a novel method for estimating the MPM is proposed by using the statistical distribution of intra modes of adjacent intra blocks. Experimental results show that the proposed method can achieve a coding gain of about 0.1dB.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.1
• /
• pp.80-87
• /
• 2017

This paper proposes a pre-processing algorithm to improve perceptual video coding efficiency which decomposes an input frame via a sub-band decomposition, and suppresses only high frequency band(s) having low visual sensitivity. First, we decompose the input frame into several frequency subbands by a linear sub-band decomposition. Next, high frequency subband(s) which is rarely recognized by human visual system (HVS) is suppressed by applying relatively small gain(s). Finally, the high frequency suppressed frame is compressed by a specific video encoder. We can find from the experimental results that if comparing before-use and after-use of the proposed pre-processing prior to the encoder, no visual difference is shown. Also, the proposed algorithm achieves bit-saving of 13.12% on average in a H.264 video encoder.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.4
• /
• pp.275-285
• /
• 2003

The now video coding standard H.264 employs variable block size motion compensation, multiple references, and quarter-pel motion vector accuracy. These techniques are key features to accomplish higher coding gain, however, at the same time main factors that increase overall computational complexity. Therefore, in order to apply H.264 to many applications, key techniques are requested to improve their speed. For this reason, we propose a fast motion estimation which is suited for variable block size motion communication. In addition, we propose a fast mode decision method to choose the best mode at early stage. Experimental results show the reduction of the number of SAT SATD calculations by a factor of 4.5 and 2.6 times respectively, when we compare the proposed fast motion estimation and the conventional MVFAS $T^{［8-10］}$. Besides, the number of RDcost computations is reduced by about 45%. Therefore, the proposed methods reduces significantly its computational complexity without noticeable coding loss.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.10
• /
• pp.118-128
• /
• 2015

Compressive sensing (CS) has to face with two challenges of computational complexity reconstruction and low coding efficiency. As a solution, this paper presents a novel spatially scalable Kronecker two layer compressive sensing framework which facilitates reconstruction up to three spatial resolutions as well as much improved CS coding performance. We propose a dual-resolution sensing matrix based on the quincunx sampling grid which is applied to the base layer. This sensing matrix can provide a fast-preview of low resolution image at encoder side which is utilized for predictive coding. The enhancement layer is encoded as the residual measurement between the acquired measurement and predicted measurement data. The low resolution reconstruction is obtained from the base layer only while the high resolution image is jointly reconstructed using both two layers. Experimental results validate that the proposed scheme outperforms both conventional single layer and previous multi-resolution schemes especially at high bitrate like 2.0 bpp by 5.75dB and 5.05dB PSNR gain on average, respectively.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.7
• /
• pp.85-92
• /
• 2010

In this paper, we consider the orthogonal frequency division multiplexing (OFDM) based transmission incoorperating with beam-switching and space-time coding. Specifically, we consider three configurations; (1) the beamforming technique, (2) the spatial diversity technique and (3) their combination and evaluate the performance in wireless personal area network (WPAN) environment. For the beam-forming technique, we consider the beam-switching which is performed at RF front-end with a pre-defined set of beams and for the space-time coding, we consider the Alamauti scheme with antenna selection. For the combined scheme, we divide the antennas used into two group to generate two independent beams and apply the two-antenna Alamauti scheme over the two beams. For these three configurations, performance is evaluated in terms of the SNR gain.

• Journal of Broadcast Engineering
• /
• v.17 no.6
• /
• pp.1029-1039
• /
• 2012

In this papar, we propose a new motion estimation and coding technique using adaptive motion vector resolution. Currently, HEVC encodes a video using 1/4 motion vector resolution. If there are high texture regions in a picture, HEVC can't get a performance enough. So, we insert additional 1-bit flag meaning whether motion vector resolution is 1/4 or 1/8 in PU syntax. Therefore, decoder can recognize the transmitted motion vector resolution. Experimental results show that maximum coding efficiency gain of the proposed method is up to 5.3% in luminance and 7.9% in chrominance. Average computional time complexity is increased about 33% in encoder and up to 5% in decoder.

• Journal of Broadcast Engineering
• /
• v.18 no.4
• /
• pp.647-650
• /
• 2013

HEVC RExt(High Efficiency Video Coding Range Extension) set a goal to support RGB/YUV 4:2:2 4:4:4 color sampling and over 10 bit-depth images. Unlike the previous 4:2:0 color sampling images, RGB images have the high correlation in inter-color planes. Using this characteristic, some methods which are contributed in JCT-VC standardization meetings estimate the pixel values of inter-color plane. But when we use the estimation of inter-color plane in RGB images, high frequency components of RGB images are caused to reduce the coding efficiency because they usually have the low inter-color plane correlation. Therefore, in this paper, we propose an adaptive low pass filtering method in the inter-color plane estimation. Using this method, we can improve the estimation efficiency of inter-color plane in RGB images. The experimental results with HEVC RExt RGB test sequences show that the proposed method has 0.6% BD(Bjontegaard Distortion)-rate gain and some increased complexity compared to the previous inter-color plane estimation method.