• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.117-120
• /
• 2001

In this paper, we propose a robust trellis coded modulation for a correlated Rayleigh fading channel. This method use only one transmit antenna, which can achieve superior performance compared to Space-Time Trellis Coded Modulation (STTC) over a wide channel correlation range among transmit antennas. The code is designed to have the largest Euclidean distance between faded signals at the receiver. Computer simulations are performed to evaluate the frame error rate (FER) performance and to compare the proposed code with the conventional one.

• Journal of the Korea Computer Industry Society
• /
• v.5 no.9
• /
• pp.1079-1088
• /
• 2004

Generally, the code motion algorithm accomplishes the run-time optimal connected with the computational optimifation and the register overhead This paper proposes a sparse code motion, which considers the code size, in addition to computational optimization and lifetime optimization. The BCM algorithm carries out the optimal code motion computationally and the LCM algorithm reduces the register overhead in a sparse code motion algorithm. A sparse code motion algorithm is optimum algorithm computationally and lifetime because of suppression unnecessary code motion This algorithm improves runtime and efficiency of the program than the previous work through the performance test.

• Journal of Information Technology Services
• /
• v.10 no.2
• /
• pp.247-257
• /
• 2011

In this paper, we propose a multiple-disseminators determining mechanism for Efficient Code Dissemination with low-delay(ECoDi) for wireless sensor networks (WSN). Code dissemination is in the spotlight as an important research issue since sensor nodes are necessary for updating new software remotely or fixing bugs dynamically. In particular, the time factor for code dissemination is the most important factor in order that the normal operation of nodes can be continuously performed as soon as finishing the dissemination. For this factor, ECoDi determines the set of disseminators through regression analysis based on the size of distributed code and the time of past unicasts and broadcasts. Then it transmits the entire code as a unicast to multiple disseminators, and the disseminators broadcast the code to the remaining neighbor nodes. Performance results on a testbed show that ECoDi reduces dissemination time significantly compared to a conventional scheme.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 1998.12a
• /
• pp.537-545
• /
• 1998

This paper is the research about a joint coding system of source and channel coding using VF(Variable-to-fixed length) arithmetic code and BCH code. We propose a VF arithmetic coding method with EDC( Error Detecting Capability) and a joint coding method in that the VF arithmetic coding method with EDC is combined with BCH code. By combining both the VF arithmetic code with EDC and BCH code. the proposed joint coding method corrects a source codeword with t-errors in decoding of BCH code and carries out a improvement of the EDC of a codeword with more than (t＋1)-errors in decoding of the VF arithmetic coding with EDC. We examine the performance of the proposed method in terms of compression ratio and EDC.

• Journal of Positioning, Navigation, and Timing
• /
• v.4 no.4
• /
• pp.151-160
• /
• 2015

GPS L2C signal is a recently added civil signal to L2 frequency and is constructed by time division multiplexing of civil moderate (L2-CM) and civil long (L2-CL) code signals. While the L2-CM code is 20 ms-periodic and modulates satellite navigation message, the L2-CL code is 1.5s-periodic with 767,250 chips long code sequence and carries no data. Therefore, the L2-CL code signal allows receivers to perform a very long coherent integration. However, due to the length of the L2-CL code, the acquisition of the L2-CL code signal may take too long or require too much hardware resources. In this paper, we propose a three-step ultra-fast L2-CL code acquisition (TSCLA) technique for dual band GPS receivers. In the proposed TSCLA technique, a dual band GPS receiver sequentially acquires the coarse/acquisition (C/A) code signal at L1 frequency, the L2-CM code signal, and the L2-CL code signal to minimize mean acquisition time (MAT). The theoretical performance analysis and numerous Monte Carlo simulations show the significant advantage of the proposed TSCLA technique over conventional techniques introduced in the literature.

• Current Optics and Photonics
• /
• v.3 no.6
• /
• pp.531-540
• /
• 2019

Spectral Amplitude Coding Optical Code Division Multiple Access (SAC OCDMA) is an advanced technique in asynchronous environments. This paper proposes design and implementation of a novel quantum logic gate (QLG) code, with code construction algorithm generated without following any code mapping procedures for SAC system. The proposed code has a unitary matrices property with maximum overlap of one chip for various clients and no overlaps in spectra for the rest of the subscribers. Results indicate that a single algorithm produces the same length increment for codes with weight greater than two and follows the same signal to noise ratio (SNR) and bit error rate (BER) calculations for a higher number of users. This paper further examines the performance of a QLG code based SAC-OCDMA system with NAND and direct detection techniques. BER analysis was carried out for the proposed code and results were compared with existing MDW, RD and GMP codes. We demonstrate that the QLG code based system performs better in terms of cardinality, which is followed by improved BER. Numerical analysis reveals that for error free transmission (10^-9), the suggested code supports approximately 170 users with code weight 4. Our results also conclude that the proposed code provides improvement in the code construction, cross-correlation and minimization of noises.

• Journal of Satellite, Information and Communications
• /
• v.9 no.2
• /
• pp.110-113
• /
• 2014

In this paper, we address a problem of finding the optimum inner and outer code rates for a concatenated code in Gaussian binary symmetric channels. Clearly, as the inner code rate decreases, the error detection capability of the inner code increases. However, decreasing the inner code rate implies a decrease in error-correction capability of the outer code when overall code rate is fixed. With this notion in mind, we examine the optimum distribution of redundancy on the outer and inner codes to achieve a maximum performance gain in the concatenated coding scheme. Our analysis shows that the maximum coding gain can be obtained when the inner code rate is maximized and the outer code rate is minimized under the constraint of total code rate is fixed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.5
• /
• pp.404-414
• /
• 2013

In the conceptual design phase of jet fighters, the trade study is performed repeatedly for a selection of the baseline configuration. The automation of repeated trade study makes possible to select efficiently the baseline configuration. In this study, the performance analysis code was developed for the automation of trade study. The code was consists of the module of shape generation, the module of weight estimation, the module of mission performance analysis. 3D CAD Model can be generated by the module of shape generation and Weight can be estimated by using the empirical equation in the module of weight estimation. The module of mission performance analysis was able to calculate the mission performance about the arbitrary mission profile. In addition, the optimal mission performance can be calculated by using optimization method. By performing the validation, the code was confirmed to be able to apply to the conceptual design phase.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.14 no.1
• /
• pp.8-14
• /
• 2018

Printed circuit heat exchangers (PCHEs) are widely used with an increasing demand for industrial applications. PCHEs are capable of operating at high temperatures and pressure. We consider a PCHE as a candidate intermediate heat exchanger type for a high temperature gas-cooled reactor (HTGR). For conventional application using stainless steels, design and manufacturing of PCHEs are well established. For applications to HTGR, knowledge of longitudinal conduction and deformation of channel is required to estimate design margin. This paper analyzes the effects of longitudinal conduction and deformation of channel on thermal performance using a code internally developed for design and analysis of PCHEs. The code has a capability of two dimensional simulations. Longitudinal conduction is estimated using the code. In HTGR operating condition, about ten percent of design margin is required to compensate thermal performance. The cross-sectional images of PCHE channels are obtained using an optical microscope. The images are processed with computer image process technique. We quantify the deformation of channel with dimensional parameters. It is found that the deformation has negative effect on structural integrity. The deformation enhances thermal performance when the shape of channel is straight in laminar flow regime. It reduces thermal performance in cases of a zigzag channel and turbulent flow regime.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.4
• /
• pp.11-20
• /
• 1994

The error rate equation of DS-CDMA/DQPSK skgnal adopting ARQ scheme has been derived in indoor radio channel which is characterized by AWGN, multi-user interference (MUI) and Rician fading, Using the derived equation the error performance has been evaluated and shown in figures as a function of direct to diffuse signal power ratio(KS1rT), the number of active users (K), PN code sequence length (N), the number of parity bit of linear code (b), forward channel BER, and ES1bT/NS1OT. From the results it is known that in severe fading environments (KS1rT=6) the performance of DS-CDMA/DQPSK system is not reliable so it is needed to adopt techniques for improvement. When an ARQ scheme is adopted, as a method for improving error performance, the performance improves compared with that of non-ARQ scheme and the degree of improvement is proportional to the number of parity bits of linear code. As increasing the number of parity bits, system performance is improved vut system throughput efficiency must be considered. In severe fading channel Hybrid ARQ scheme is more effective than ARQ scheme. As a result, ARQ scheme is appropriate for the high-reliability data communication systems over the radio channel in which the real time processing is not required.