• Journal of the Korean Institute of Telematics and Electronics
• /
• v.12 no.2
• /
• pp.1-10
• /
• 1975

This paper presents an adaptive data compression algorithm for video data. The coling complexity due to the high correlation in the given data sequence is alleviated by coding the difference data, sequence rather than the data sequence itself. The adaptation to the nonstationary statistics of the data is confined within a code set, which consists of two constant length cades and six modified Shannon.Fano codes. lt is assumed that the probability distributions of tile difference data sequence and of the data entropy are Laplacian and Gaussion, respectively. The adaptive coding performance is compared for two code selection criteria: entropy and $P_r$[difference value=0]=$P_0$. It is shown that data compression ratio 2 : 1 is achievable with the adaptive coding. The gain by the adaptive coding over the fixed coding is shown to be about 10% in compression ratio and 15% in code efficiency. In addition, $P_0$ is found to he not only a convenient criterion for code selection, but also such efficient a parameter as to perform almost like entropy.

• Journal of Ginseng Research
• /
• v.41 no.3
• /
• pp.339-346
• /
• 2017

Background: In this study, we investigated how to convert the Panax ginseng DNA sequence code and chemical fingerprints into a two-dimensional code. In order to improve the compression efficiency, GATC2Bytes and digital merger compression algorithms are proposed. Methods: HPLC chemical fingerprint data of 10 groups of P. ginseng from Northeast China and the internal transcribed spacer 2 (ITS2) sequence code as the DNA sequence code were ready for conversion. In order to convert such data into a two-dimensional code, the following six steps were performed: First, the chemical fingerprint characteristic data sets were obtained through the inflection filtering algorithm. Second, precompression processing of such data sets is undertaken. Third, precompression processing was undertaken with the P. ginseng DNA (ITS2) sequence codes. Fourth, the precompressed chemical fingerprint data and the DNA (ITS2) sequence code were combined in accordance with the set data format. Such combined data can be compressed by Zlib, an open source data compression algorithm. Finally, the compressed data generated a two-dimensional code called a quick response code (QR code). Results: Through the abovementioned converting process, it can be found that the number of bytes needed for storing P. ginseng chemical fingerprints and its DNA (ITS2) sequence code can be greatly reduced. After GTCA2Bytes algorithm processing, the ITS2 compression rate reaches 75% and the chemical fingerprint compression rate exceeds 99.65% via filtration and digital merger compression algorithm processing. Therefore, the overall compression ratio even exceeds 99.36%. The capacity of the formed QR code is around 0.5k, which can easily and successfully be read and identified by any smartphone. Conclusion: P. ginseng chemical fingerprints and its DNA (ITS2) sequence code can form a QR code after data processing, and therefore the QR code can be a perfect carrier of the authenticity and quality of P. ginseng information. This study provides a theoretical basis for the development of a quality traceability system of traditional Chinese medicine based on a two-dimensional code.

• Journal of Web Engineering
• /
• v.20 no.6
• /
• pp.1813-1828
• /
• 2021

In a computing environment, higher resolutions generally require more memory bandwidth, which inevitably leads to the consumption more power. This may become critical for the overall performance of mobile devices and graphic processor units with increased amounts of memory access and memory bandwidth. This paper proposes a lossless compression algorithm with a multiple differential pulse-code modulation variable sign code Golomb-Rice to reduce the memory bandwidth requirement. The efficiency of the proposed multiple differential pulse-code modulation is enhanced by selecting the optimal differential pulse code modulation mode. The experimental results show compression ratio of 1.99 for high-efficiency video coding image sequences and that the proposed lossless compression hardware can reduce the bus bandwidth requirement.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.5
• /
• pp.582-594
• /
• 2016

Various test data compression techniques have been developed to reduce the test costs of system-on-a-chips. In this paper, a scan chain reordering algorithm for code-based test data compression techniques is proposed. Scan cells within an acceptable relocation distance are ranked to reduce the number of conflicts in all test patterns and rearranged by a positioning algorithm to minimize the routing overhead. The proposed method is demonstrated on ISCAS '89 benchmark circuits with their physical layout by using a 180 nm CMOS process library. Significant improvements are observed in compression ratio and test power consumption with minor routing overhead.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.6
• /
• pp.857-865
• /
• 1995

In this paper, a nibble RLE(Run Length Encoding) code for real time compression and decompression of Hanguel bit map font and printer data is proposed. The nibble RLE code shows good compression ratio in complete form Hangeul Myoungjo and Godik style bit map font and printer output bit map data. And two ASICs seperating compression and decompression are designed and simulated on CAD to verify the proposed code. The 0.8 micron CMOS Sea of Gate is used to implement the ASICs in amount of 2, 400 gates, and these are running at 25MHz. Therefore, the proposed code could be implemented with simple hardware and performs 100M bit/sec compression and decomression at maximum, it is good for real time applications.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.4
• /
• pp.541-547
• /
• 2013

Range resolution is important performance parameter to distinguish a target accurately. The destination of modern radar systems, to overcome the limitations of existing analog radar systems, is to improve the range resolution of the distance with low transmission power. For that reason, the research on pulse compression techniques is briskly studying. In the Receiver, modulation system of transmitted signal which has used in pulse compression technique is divided PM and FM to distinguish a target. In this paper, We analysed and designed the pulse compression signal processing module using the Baker Code which is the one of PM method's.

• Journal of KIISE:Software and Applications
• /
• v.37 no.11
• /
• pp.851-858
• /
• 2010

Most mobile devices use a NAND flash memory as their secondary memory. A compressed code of the firmware is stored in the NAND flash memory of mobile devices in order to reduce the size and the loading time of the firmware from the NAND flash memory to a main memory. In order to use a demand paging properly, a compressed code should be decompressed very quickly. The thesis introduces a new dictionary based compression algorithm for the fast decompression. The introduced compression algorithm uses a different method with the current LZ method by storing the "exclusive or" value of the two instructions when the instruction for compression is not equal to the referenced instruction. Therefore, the thesis introduces a new compression format that minimizes the bit operation in order to improve the speed of decompression. The experimental results show that the decoding time is reduced up to 5 times and the compression ratio is improved up to 4% compared to the zlib. Moreover, the proposed compression method with the fast decoding time leads to 10-20% speed up of booting time compared to the booting time of the uncompressed method.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.4
• /
• pp.421-429
• /
• 2018

While IoT device sensing data or financial transaction data is transmitted in real time, huge data traffic is generated in processing it. This huge data can be effectively compressed or transmitted using universal code, which is a real-time lossless compressor. In this paper, we propose our BL-beta code, which is newly developed universal code for compressing stock trading data, which the maximum range of measured values is difficult to predict and is generated within a relatively constant range over a very short period of time. For compressing real-time stock trading data, Compared with the fixed length bit transmission, the compression efficiency is at least 49.5% higher than that of the fixed length bit transmission, and the compression transmission performance is 16.6% better than the Exponential Golomb code.

• KCI Concrete Journal
• /
• v.11 no.3
• /
• pp.5-17
• /
• 1999

In recent years. the concept of the modified compression field theory (MCFT) was develped and applied to the analysis of reinforced concrete beams subjected to shear, moment, and axial load. Although too complex for regular use in the shear design or beams. the procedure has value in its ability to provide a rational method of anlysis and design for reinforced concrete members. The objective of this paper is to review the MCFT and apply it for the prediction of the response and shear strength of reinforced concrete beams A Parametric analysis was Performed on a reinforced T-section concrete beam to evaluate and compare the effects of concrete strength. longitudinal reinforcement ratio shear reinforcement ratio, and shear span to depth ratio in two different approaches the MCFT and the ACI code. The analytical study showed that the concrete contribution to shear strength by the MCFT was higher than the one by the ACI code in beams without stirrups, while it was lower with stirrups. On the other hand. shear reinforcement contribution predicted by the MCFT was much higher than the one by the ACI code. This is because the inclination angle of shear crack is much smaller than 45$^{\circ}$assumed in the ACI code.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.299-302
• /
• 2010

Recently, the malicious code is not easily detectable in the vaccine for the virus, malicious code as a compressed file by modulation pattern is the tendency to delay. Among the many antivirus engines on the market a compressed file that can be modulated by malicious code, and test whether the pattern will need to know. We cover a multi-compressed files, malicious code modulated secreted by examining patterns of test engine is being detected is through a computer simulation. Analysis of secreted activities of malicious code and infect the host file tampering with the system driver files and registry, it gets registered is analyzed. this study will contribute hidden malicious code inspection and enhance vaccine efficacy in reducing the damage caused by malicious code.