• Journal of Magnetics
• /
• 제10권3호
• /
• pp.80-83
• /
• 2005

Cobalt ferrite and garnet powders were grown using a conventional ceramic method in two different ways for understanding the magnetic interaction between structurally different materials. Structures of these powders were investigated by using an X-ray diffractometer (XRD) and the magnetic interaction between iron ions and the magnetic properties of the powders were measured by a $M\ddot{o}ssbauer$ spectroscopy and a vibrating sample magnetometer (VSM), respectively. The result of the XRD measurement showed that the annealing temperature higher than $1200^{\circ}C$ was necessary to grow a $(CoFe_2O_4)_{0.5}(Y_3Fe_5O_{12})_{0.5}$ powder. $M\ddot{o}ssbauer$ spectra for the powders grown separately and mixed mechanically consisted of sub-spectra of cobalt ferrite and garnet, however, powders annealed together had an extra sub-spectrum, which was related with the magnetic interaction between the grain surface of cobalt ferrite and the one of the garnet. In case of annealing the powders at the temperature large enough to crystallize them, raw chemicals became fine cobalt ferrite and garnet particles at first and then these fine particles were aggregated and formed large grains of ferrite powders. The result of the VSM measurement showed that the powders prepared at $1200^{\circ}C$ had the similar saturation magnetization and the coercivity regardless of the preparation method.

• Journal of Electrochemical Science and Technology
• /
• 제12권4호
• /
• pp.458-464
• /
• 2021

Lithium ion batteries (LIBs) is a kind of rechargeable secondary battery, developed from lithium battery, lithium ions move between the positive and negative electrodes to realize the charging and discharging of external circuits. Zeolitic imidazolate frameworks (ZIFs) are porous crystalline materials in which organic imidazole esters are cross-linked to transition metals to form a framework structure. In this article, ZIF-67 is used as a sacrificial template to prepare nano porous carbon (NPC) coated cobalt nanoparticles. The final product Co/NPC composites with complete structure, regular morphology and uniform size were obtained by this method. The conductive network of cobalt and nitrogen doped carbon can shorten the lithium ion transport path and present high conductivity. In addition, amorphous carbon has more pores that can be fully in contact with the electrolyte during charging and discharging. At the same time, it also reduces the volume expansion during the cycle and slows down the rate of capacity attenuation caused by structure collapse. Co/NPC composites first discharge specific capacity up to 3115 mA h/g, under the current density of 200 mA/g, circular 200 reversible capacity as high as 751.1 mA h/g, and the excellent rate and resistance performance. The experimental results show that the Co/NPC composite material improves the electrical conductivity and electrochemical properties of the electrode. The cobalt based ZIF-67 as the precursor has opened the way for the design of highly performance electrodes for energy storage and electrochemical catalysis.

• 에너지공학
• /
• 제5권1호
• /
• pp.56-64
• /
• 1996

본 연구는 방사성 폐액의 처리를 목적으로 화학처리와 한외여과막의 결합공정에 의해서 Cs과 Co이온의 제거 특성을 조사하였다. 실험은 회분식 UF Stirred Cell을 이용하였고, 화학결합제로서 Cs에 대해서는 시안화철구리화합물, 그리고 Co에 대해서는 Polyacrylic Acid(PAA)를 주입하여 Cs이온과 Co이온의 제거 거동을 조사하였다. Cs의 결합특성은 Langmuir Isotherm형태의 식으로 나타내어 평가하였으며, Cs/K$_2$Cu$_3$(Fe(CN)$_{6}$)$_2$의 몰비가 1.5에서 효율적인 조건임을 알 수 있었다. Co의 제거효율은 용액의 pH, PAA및 Co이온의 몰비에 의해서 결정되었다. Co의 제거거동은 리간드와 Co와의 결합,용액의 pH및 Co농도와의 상호작용에 의한 평형관계식에 의해서 평가하였으며, 이때 90%의 제거율을 얻기 위한 조건은 몰비가 2($\beta$=2)이고 pH가 5.6이었다. 이의 결과로부터 Cs과 Co의 동시제거을 위한 화학첨가제의 주입방법에 대한 제거성능을 평가하였다.

• Journal of Electrochemical Science and Technology
• /
• 제7권4호
• /
• pp.277-285
• /
• 2016

There is a growing demand for simple, cost-effective, and accurate analytical tools to determine the concentrations of biological and environmental compounds. In this study, a stable electroactive thin film of cobalt hexacyanoferrate (Cohcf) was prepared as an in situ chemical precipitant using electrostatic adsorption of $Co^{2+}$ on a silicate sol-gel matrix (SSG)-modified indium tin oxide electrode pre-adsorbed with $[Fe(CN)_6]^{3-}$ ions. The modified electrode was characterized by scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and electrochemical techniques. Electrocatalytic oxidation of hydrazine on the modified electrode was studied. An electrochemical sensor for hydrazine was constructed on the SSG-Cohcf-modified electrode. The oxidation peak currents showed a linear relationship with the hydrazine concentration. This study provides insight into the in situ growth and stability behavior of Cohcf nanostructures and has implications for the design and development of advanced electrode materials for fuel cells and sensor applications.

• Bulletin of the Korean Chemical Society
• /
• 제33권6호
• /
• pp.1929-1933
• /
• 2012

Two cobalt(II) compounds $[Co(2,2{^\prime}-bipy)(H_2O)_2(SO_4)]_n$ (1) and $[Co_2(2,2^{\prime}-bipy)_2(btec)(H_2O)_6]{\cdot}2H_2O$ (2) (2,2'-bipy = 2,2'-bipyridine, $H_4btec$ = 1,2,4,5-benzenetetracarboxylic acid), have been simultaneously synthesized by a one-pot slow solvent evaporation reaction. Their structures were determined by single-crystal X-ray diffraction and further characterized by X-ray powder diffraction (XRPD), IR, elemental and thermogravimetric analysis (TGA). The structural analysis reveals that compound 1 exhibits an infinite 1D chain structure with the octahedral Co(II) centers bridging by the tetrahedral ${\mu}_2-SO{_4}^{2-}$ ligands, while compound 2 possesses a dinuclear $Co_2(2,2^{\prime}-bipy)_2(btec)(H_2O)_6$ unit and the two adjacent octahedral Co(II) ions are linked by the bismonodentately coordinated btec ligand. Additionally, compound 2 exhibits blue fluorescent emission in the solid state at room temperature.

• 대한화학회지
• /
• 제24권2호
• /
• pp.121-128
• /
• 1980

Ambidentate 리간드인 isonitrosobenzoylacetone을 리간드로 하는 금속착물, tris(isonitrosobenzoylacetonato)cobalt(III) 및 bis(isonitrosobenzoylacetonato)palladium(II)을 합성한 후 분광학적 방법에 의하여 이들의 결합구조를 조사하였다. 즉 착물에서 리간드는 아세틸기의 산소 및 이소니트로소의 질소원자를 통하여 금속에 배위되어 5원의 킬레이트고리를 이루고 있음을 알 수 있었다. 이 결합구조는 Patel과 Haldar등이 얻었던 isonitrosoacetylacetone착물의 그 것들과 유사하다.

• Bulletin of the Korean Chemical Society
• /
• 제19권1호
• /
• pp.79-82
• /
• 1998

Novel coordination polymers of general form $[Co(NCS)_2(Py_2L)_2]_n\; (Py_2L=trans-1,2-bis(4-pyridyl)ethylene$ (bpee), 1; 1,2-bis(4-pyridyl)ethane (bpea), 2) have been synthesized by slow diffusion of aqueous solution of $Co(NCS)_2$ with ethanolic solution of appropriate spacer ligand, $Py_2L$, in a mole ratio of 1 : 2. X-ray analyses on both 1 and 2 have provided similar unit and infinite structures with space group Ibam. The local geometry around the cobalt(Ⅱ) atoms is an octahedral arrangement with two NCS groups in trans position (N-Co-N, 180.0° (1); 180.0°(2)) and four pyridine units in propeller fashion. Each spacer ligand connects two cobalt(Ⅱ) ions defining the edges of a $[Co(II)]_4$ rhombus. The most fascinating feature is the occurrence of perpendicular interwoven of independent square grid sheets: this is, one molecular network is perpendicularly interpenetrated through the centers of the $[Co(II)]_4$ rhombuses of another independent network with all of the cobalt(Ⅱ) atoms in a coplanar sheet. The physicochemical properties of the present unique structures were studied.

• Bulletin of the Korean Chemical Society
• /
• 제29권4호
• /
• pp.736-740
• /
• 2008

The interaction of myelin basic protein (MBP) from bovine central nervous system with divalent calcium ion was studied by isothermal titration calorimetry at 27 ${^{\circ}C}$ in aqueous solution. The extended solvation model was used to reproduce the enthalpies of $Co^{2+}$-MBP interaction over the whole $Co^{2+}$ concentrations. The solvation parameters recovered from the solvation model were attributed to the structural change of MBP due to the metal ion interaction. It was found that there is a set of three identical and noninteracting binding sites for $Co^{2+}$ ions. The association equilibrium constant is 0.015 ${\mu}M^{-1}$. The molar enthalpy of binding is $\Delta$H = −14.60 kJ $mol^{-1}$.

• 한국세라믹학회지
• /
• 제43권11호
• /
• pp.703-709
• /
• 2006

We report on the synthesis of highly uniform, single phase zinc and cobalt thin films prepared by the Liquid Phase Deposition (LPD) method. X-Ray diffraction, TGA and EDX measurements support the assumption that the as deposited films are constituted by a mixture of crystallized FeOOH and amorphous M(OH)$_2$ (M=Co, Zn) which is converted upon heat treatment in air at 600?C into the corresponding zinc ferrites. The films with adjustable chemical compositions are identified with a crystal structure as spinel-type and present a spherical or rod-like microstructure, depending on the both the nature and concentration of the divalent transition metal ions. Zinc ferrite thin films present a superparamagnetic behavior above blocking temperatures which decrease with increasing the Zn content and are ferromagnetic at 5 K with coercivities ranging between 797.8 and 948.5 Oe, whereas the cobalt ferrite films are ferromagnetic at room temperature with magnetic characteristics strongly dependent on the chemical composition.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.280-280
• /
• 2013

In green plants, energy generation is accomplished through light-harvesting photosystem, which utilize abundant visible light and multi-stepwise redox reaction to oxidize water and reduce NADP+, transferring electrons efficiently with active cofactors1. Inspired by natural photosynthesis, artificial solar water-splitting devices are being designed variously. However, the several approaches involving immobilization2, conjugation3, and surface modification4 still have limitations. We have made artificial photosynthesis templates by self-assembling tyrosine-based peptide to mimick photosystem II. Porphyrin sensitizer absorbing blue light strongly was conjugated with the templates and they were hybridized with cobalt oxide through the reduction of cobalt ions in an aqueous solution. The formation of hybrid templates was characterized using TEM, and their water oxidation performance was measured by fluorescence oxygen probe. Our results suggest that the bio-templated assembly of functional compounds has a great potential for artificial photosynthesis.