• The Journal of Advanced Prosthodontics
• /
• v.7 no.2
• /
• pp.146-150
• /
• 2015

PURPOSE. This in vitro study aimed to compare the failure load and failure characteristics of two different zirconia framework designs of premolar crowns when subjected to static loading. MATERIALS AND METHODS. Two types of zirconia frameworks, conventional 0.5 mm even thickness framework design (EV) and 0.8 mm cutback of full contour crown anatomy design (CB), were made for 10 samples each. The veneer porcelain was added on under polycarbonate shell crown made by vacuum of full contour crown to obtain the same total thickness of the experiment crowns. The crowns were cemented onto the Cobalt-Chromium die. The dies were tilted 45 degrees from the vertical plane to obtain the shear force to the cusp when loading. All crowns were loaded at the lingual incline of the buccal cusp until fracture using a universal testing machine with cross-head speed 0.5 mm/min. The load to fracture values (N) was recorded and statistically analyzed by independent sample t-test. RESULTS. The mean and standard deviations of the failure load were $1,170.1{\pm}90.9$ N for EV design and $1,450.4{\pm}175.7$ N for CB design. A significant difference in the compressive failure load was found (P<.05). For the failure characteristic, the EV design was found only cohesive failures within veneering porcelain, while the CB design found more failures through the zirconia framework (8 from 10 samples). CONCLUSION. There was a significant difference in the failure load between two designs, and the design of the framework influences failure characteristic of zirconia crown.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.6
• /
• pp.454-459
• /
• 2015

PURPOSE. To determine whether the fracture strengths and failure types differed between metal and zirconia frameworks veneered with pressable or layering ceramics. MATERIALS AND METHODS. A phantom molar tooth was prepared and duplicated in 40 cobalt-chromium abutments. Twenty metal (IPS d.SIGN 15, Ivoclar, Vivadent, Schaan, Liechtenstein) and 20 zirconia (IPS e.max ZirCAD, Ivoclar) frameworks were fabricated on the abutments. Each framework group was randomly divided into 2 subgroups according to the veneering material: pressable and layering ceramics (n=10). Forty molar crowns were fabricated, cemented onto the corresponding abutments and then thermocycled ($5-55^{\circ}C$, 10,000 cycles). A load was applied in a universal testing machine until a fracture occurred on the crowns. In addition, failure types were examined using a stereomicroscope. Fracture load data were analyzed using one-way ANOVA and Tukey HSD post-hoc tests at a significance level of 0.05. RESULTS. The highest strength value was seen in metal-pressable (MP) group, whereas zirconia-pressable (ZP) group exhibited the lowest one. Moreover, group MP showed significantly higher fracture loads than group ZP (P=.015) and zirconia-layering (ZL) (P=.038) group. No significant difference in fracture strength was detected between groups MP and ML, and groups ZP and ZL (P>.05). Predominant fracture types were cohesive for metal groups and adhesive for zirconia groups. CONCLUSION. Fracture strength of a restoration with a metal or a zirconia framework was independent of the veneering techniques. However, the pressing technique over metal frameworks resisted significantly higher fracture loads than zirconia frameworks.

• Clinical and Experimental Reproductive Medicine
• /
• v.21 no.3
• /
• pp.297-303
• /
• 1994

The effect of radiation on the steroidogenesis of rat ovary was investigated. For this purpose, female rats aged 7-8 weeks were exposed to a single dose of ${\gamma}$ radiation(320 rad or 800 rad) by the cobalt-60. At fourth(day of the first estrus) and eighth(day of the second estrus) days after irradiation, the concentrations of serum steroid hormones were determined by radioimmunoassays (RIA). The correlation between survival rate(Y) and radiation dose(X) was Y=-0.06X+100(r=0.89, n=10). Lethal dose$(LD)_{50(30)}$ and $LD_{20(30)}$ were 833.33rad and 333.33rad respectively. The weights of body and ovary was decreased significantly by the $LD_{50(30)}$ irradiation during the 4 days, but both weights were recovered at day 8. The serum levels of 17a-hydroxyprogesterone(170HP) and estradiol($E_2$) in the irradiated rats were not generally different from those of control. However, the levels of testosterone(T) and 19-norterstosterone(19NT) in the irradiated rat at $LD_{50(30)}$ and $LD_{20(30)}$ radiation doses were decreased, while progesterone levels in serum of the irradiated rats were slightly increased. These results suggest that irradiation may inhibit the first step of steroidogenesis, especially the conversion of P to T, in the rat ovary.

• Korean Journal of Microbiology
• /
• v.5 no.2
• /
• pp.79-85
• /
• 1967

Kim, Jong Hyup., (Div. of Biology, Atomic Energy Research Institute,Korea.;) Studies on the Cellulor Metabolism in Microorganisms as influenced by Gamma-irradiation(III): On the Changes of Free Amino acid Pool and content of Protein in Yeast clls irradiated by .gamma.-ray. 1. The strain of Saccharomyces cerevisiae had been cultured synchronously in aerobic condition and irradiatel by gamma-ray from the source of cobalt-60. Drying in vacuum oven at $90^{\circ}C$ C over 12 hours, then changes of protein content (Kjeldahl) and free amino acid pool have been assayed with use of spectrophotometer. Results obtained were compared with those of unirradiated normal cells. 2. It is proved that amount of protein content in the irradiated cells increases to seven percent more than those of normal cells in the same weight of dried samples. It seems like carbohydrate breakown had been stimulated by irradiation and that relative contents of protein shows higher values than those of normal in the same weight of samples. 3. The amount of free amino acid pool in the irradiated cells shows less value about ten percent than those of normal cells, and rate of decreasing is also weak than those of standard reagent solution of amino acid. We may assume that free amino acid pool would be protected against radiation damage in living cells and more stable than in vitro. 4. The component of free amino acid pool have been assayed on second dimensional paper chromatogram, and the identified amino acids are as follows; aspartic acid, serine, glutamic acid, cystine, lysine, glycine, threonine, histidine, arginine, tyrosine, phenylalanine, valine and leucine. 5. Distributional presence of free amino acids are identical to that of normal cells except arginine, it is cosumable that radiation effect is univerlsal to all amino acid. However it is obvious that there are differences in radiolabilities of amino acids in irradiated cells.

• Journal of Life Science
• /
• v.15 no.4 s.71
• /
• pp.641-646
• /
• 2005

An approximately 10-fold higher level of adherence of Salmonella typhimurium strain TML to Int-407 cells was observed with organisms grown in Luria broth or in high-iron containing medium than those grown in low-iron containing medium. Iron specifically enhanced adherence, while other cations such as calcium, cobalt, copper, potassium, magnesium and manganese did not. It was suggested that iron did not act as a passive ligand - probably it stimulated production of bacterial factors necessary for adherence. A similar pattern of iron modulation of adhesiveness was also seen in Salmonella mutants with single or different combinations of multiple mutations in genes encoding the mannose sensitive hemagglutinin (type 1 fimbriae), mannose resistant hemagglutinin and flagellum. The adhesiveness of an isogenic fur mutant was modulated by iron in a manner similar to the wild-type strain, suggesting that iron modulation of adherence is independent of the fur gene product.

• Resources Recycling
• /
• v.22 no.3
• /
• pp.43-49
• /
• 2013

A study on the recovery of lithium and leaching behavior of NCM powder by hydrogen reduction for NCM system Li-ion battery scraps was investigated. The reductive rate was about 93% at $800^{\circ}C$ by hydrogen treatment. The lithium carbonate with 99% purity was manufactured by using $CO_2$ gas and washing method with water for NCM powder after hydrogen reduction. As a result of comparing the powders before and after the hydrogen reduction treatment for acid leaching behavior we obtained 32% enhanced leaching rate of cobalt, 45% enhanced leaching rate of nickel and the 90% leaching effect for manganese by hydrogen reduction at 2M $H_2SO_4$ concentration condition.

• Journal of the Korean Institute of Gas
• /
• v.13 no.5
• /
• pp.33-38
• /
• 2009

Synthetic natural gas was producd by the reaction of carbon monoxide and hydrogen via methanation. Ni-Co bimetallic catalyst supported on $Al_2O_3$ for methanation was prepared using deposition-precipitation method. For the comparison, Ni, Co monometallic catalyst was prepared using the same method. The prepared catalysts were characterized by TEM, XRD and TPR and applied to methanation reaction. The catalysts prepared using deposition-precipitation method showed the high metal dispersion. The activity of Ni-Co bimetallic catalyst was higher than that of Ni, Co monometallic catalyst. TPR measurements indicated that Ni-Co bimetallic catalyst had more active hydrogen species than Ni, Co monometallic catalyst due to the synergetic effect in the presence of Ni and Co.

• Journal of Chitin and Chitosan
• /
• v.23 no.4
• /
• pp.256-261
• /
• 2018

Recently, the number of cardiovascular disease-related deaths worldwide has increased. Therefore, the importance of percutaneous cardiovascular intervention and drug-eluting stents (DES) has been highlighted. Despite the great clinical success of DES, the re-endothelialization at the site of stent implantation is retarded owing to the anti-proliferative effect from the coated drug, resulting in late thrombosis or very late restenosis. In order to solve this problem, studies have been actively carried out to excavate new drugs that promote rapid re-endothelialization. In this study, we introduced hydrophilic drug, tauroursodeoxycholate (TUDCA), that improves the proliferation of endothelial progenitor cells and promotes apoptosis of vascular smooth muscle cells. In addition, we utilized shellac, which is a natural resin from lac bug to coat TUDCA on the surface of the metal. When using conventional coating method including biodegradable polymers and organic solvents, phase separation between polymer and drug occurred in the coating layer that caused incomplete incorporation of drug into the polymer layer. However, when using shellac as a coating polymer, no phase separation was observed and drug was fully covered with the polymer matrix. In addition, by adjusting the composition of coating solution and modifying the hydrophilicity of the metal surface using oxygen plasma, the surface roughness decreased due to the increased affinity between coating solution and metal surface. This result provides a method of depositing a hydrophilic drug layer on the stent.

• Journal of Radiation Industry
• /
• v.5 no.1
• /
• pp.35-39
• /
• 2011

This study was investigated the effect of tumor cell cytotoxicity of gamma irradiated Chaga mushroom extract (CME). CME was prepared by hot water extraction at $70^{\circ}C$ for 4 hours and lyophilized. $Ten\;mg\;ml^{-1}$ of lyophilized CME powder was dissolved with deionized water and then irradiated at the doses of 10, 50, 100, and 150kGy by cobalt 60 gamma irradiator. The gamma-irradiated and non-irradiated CME were treated into the cancer cell, including human stomach cancer and human colon cancer. Cytotoxicity against the cancer cell was increased in gamma-irradiated CME and antioxidant activity was also increased in gamma-irradiated CME, as irradiation dose increased. Therefore, it was considered that gamma irradiation was effective method for improvement of the cancer cell cytotoxicity and antioxidant activity of Chaga mushroom extract.

• Journal of the Korean Magnetics Society
• /
• v.4 no.1
• /
• pp.25-31
• /
• 1994

The magnetic properties of aluminum anodized film in which Co-Fe alloy electrodeposited are investigated with regard to the alloy composition of magnetic films. The electrodeposited Co-Fe particles are confirmed to be single phase Co-Fe alloys by X-ray diffractions. At 34 at% Co, the sample with small pore diameter(particle diameter $150\;{\AA}$) has a large magnetic energy product($B_{max}$) of about 1.44 MGOe due to the large saturation magnetization, the high coercive force and good squareness of the M-H curve. However, for the samples with particle diameter larger than $450\;{\AA}$, the bottom of each particle forms abnormal particle claaed branch-shaped unlike the sample of the particle diameter $150\;{\AA}$. In this case, the magnetic anisotropy energy was about zero at the compositions of 45 and 75 at% Co. Moreover, at the compositions from 50 to 70 at% Co, the anisotropy became negative value. This means that an easy axis of magnetization of the film is in plane in plane in spite of the perpendicular shape anisotropy of the particle. It was found that the bottom extremity of the particle contains FeC from the X-ray diffraction. Thus the effect of the bottom extremity, that is, an unusal magnetic property was removed by electrodepositing Cu at the bottom extremity of the particle. Itis clear that the magnetic properties of the ilms are influenced by he branch-shaped bottom extremity filled with FeC.