• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.1
• /
• pp.73-79
• /
• 2011

Purpose of this experiment is to evaluate the effect of titanium on the castability when the titanium is added to the Co-Cr alloy. Raw materials Cobalt, Chrome, Molybdenum, Silicon, Manganase, Carbon, Nitrogen, Titanium were weighted and prepared. $Biosil^F$ (Degudent, Germany) was the control group. To the experimental group, different weight percent of titanium was added from 1 wt% to 4 wt%. The wax pattern is $30{\times}40$ cm in size, rectangular in shape and has total of 160 grids. Centrifugal machine (Neutrodyne Easy Ti: Manfredy) was used for casting. For evaluation of the castability, the number of complete grids was counted by visual inspection and X-ray inspection. The test showed similar castability with the control group in the titanium addition of 1 wt% to 3 wt%. The titanium addition of 4 wt% showed poor result. With titanium lower than 4 wt%, the experiment metals showed proper castability with high expectation of successful clinical use.

• Journal of Life Science
• /
• v.23 no.11
• /
• pp.1342-1350
• /
• 2013

We examined the effect of hydrogen sulfide ($H_2S$) in chemical hypoxia-induced injury in mouse hepatocytes. Cell viability was significantly decreased by cobalt chloride ($CoCl_2$), a well-known hypoxia mimetic agent in a time- and dose- dependent manner. Sodium hydrosulfide (NaHS, a donor of $H_2S$) pretreatment before exposure to $CoCl_2$ significantly attenuated the $CoCl_2$-induced decrease of cell viability. $CoCl_2$ treatment resulted in an increase of intracellular ROS generation, which is inhibited by NaHS or N-acetyl-cysteine (NAC, a ROS scavenger), and p38 MAPK phosphorylation, which is also blocked by NaHS or NAC. The $CoCl_2$-induced increase of the Bax/Bcl-2 ratio was attenuated by NaHS, NAC, and SB 203580 (p38 MAPK inhibitor). The $CoCl_2$-induced decrease of cell viability was also attenuated by NaHS, NAC, and SB 203580 pretreatment. Additionally, NaHS inhibited the $CoCl_2$-induced COX-2. Similar to the effect of NaHS, NAC blocked $CoCl_2$-induced COX-2 expression. Furthermore, NS-398 (a selective COX-2 inhibitor) attenuated not only the $CoCl_2$-induced increase of the Bax/Bcl-2 ratio, it also decreased cell viability. Taken together, $H_2S$ protects primary cultured mouse hepatocytes against $CoCl_2$-induced cell injury through inhibition of the ROS-activated p38 MAPK cascade and the COX-2 pathway.

• Journal of the Korean Chemical Society
• /
• v.55 no.5
• /
• pp.824-829
• /
• 2011

In Fischer-Tropsch Synthesis, because of few reactants ($H_2$, CO), scarce operating parameters affected on efficiency especially the selectivity of products. In this research, effect of operating parameters on the selectivity of Co-Mn-$TiO_2$ Fischer-Tropsch synthesis catalyst were studied by design of experimental procedure and Taguchi method. According to this research, interactions between operating factors have a crucial effect on light products selectivity. Among these interactions, (temperature${\times}$feed ratio) has the main influence on light hydrocarbons selectivity. It was concluded that temperature and feed ratio ($H_2$/CO) were the most integral operating parameters for much greater selectivity of light hydrocarbons.

• Journal of the Korean institute of surface engineering
• /
• v.15 no.4
• /
• pp.208-217
• /
• 1982

To study the effect of TiC coating on weight change, microhardness, wear and heat - resistance of TiC layer, chemical vapour deposition on the various substrates has been carried out with the gaseous mixture of TiCl4, toluene, and H2 in the temperature range of 900 - 1000$^{\circ}C$. The results obtained are as follows ; (1) There is a limited value of carrier and reductant H2 gas flow rate, above which deteriorate effect on the TiC depoition arises (2) Increased thickness of TiC layer was resulted with increasing temperature and time. Better deposition was obtained with stainless steels and the best results were introduced by cobalt coating of substrates. (3) Wear resistance of the TiC coated specimen improved markedly. Heat resistivity of the coated steel showed excellent result, whereas the coated stainless Steels were infer-ior to the substrate.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.2
• /
• pp.212-217
• /
• 1998

The electrochemistry and valence tautomerism of CoⅢ(N-N)(SQ)(Cat), [N-N=N,N,N',N'-tetramethylethylenediamine (TMEDA); SQ=3,5- or 3,6-di-tert-butyl-semiquinone, Cat=3,5- or 3,6-di-tert-butyl-catechol], have been investigated by spectroscopic, electrochemical, spectroelectrochemical methods in nonaqueous solvents under anaerobic condition. The transition temperature between tautomers is dependent upon the donation effect of substituted quinone ligand and solvent. It increases with the increase of donation effect of solvent and quinone ligand. CoⅢ(TMEDA)(SQ)(Cat) is reduced to [CoⅡ(TMEDA)(SQ)(Cat)]-, and then reduces to [CoⅡ(TMEDA)(Cat)2]2-. CoⅢ(TMEDA)(SQ)(Cat) is oxidized to [CoⅢ(TMEDA)(SQ)2]+, but the stability of the oxidized form in DMF is dependent upon the solution temperature. With the increase of solution temperatrue the oxidized form may be converted to [CoⅡ(TMEDA)(SQ)(BQ)]+ by intramolecular electron transfer from SQ ligand to CoⅢ.

• Radiation Oncology Journal
• /
• v.4 no.1
• /
• pp.1-13
• /
• 1986

In order to clarify the effect of radiation on the mouse jejunal crypt cells by combined administration of administration and radiation and also to evaluate the enhancing effect of adriamycin, the authors performed this study by delivering single irradiation of 1,000 to 1,600 rad to the whole abdomen of mice by cobalt-60 teletherapy unit. In combination with adriyamycin treatment groups, the drug was administered as single dose of 10 mg/kg either 2 hours before or 4 hours after graded single dose,900 to 1,400 rad, of irradiation. The authors studied the quantitative changes of intestinal crypt cells by microcolony survival assay technique and the morphological changes of small intestinal villi by scanning electron microscope in mice following to combined therapy with adriamycin and irradiation, The average number of jejunal crypts per circumference was $130{\pm}16$ in control group. The mean lethal dose(Do) of each irradiation alone and combined therapy groups 2 hours before and 4 hours after irradiation, were 160, 170, and 170 rad in cell survival curves, respectively. The dose effect factor(DEF) of adriamycin in each groups of pre-irradiation and post-irradiation were 1.19 and 1.26, respectively. The conical shaped villi were noted on 1,200 rad in irradiation alone group and 1,000 rad in combined groups. For the proper clinical application we must be careful of the radiation injury to small bowel when the anticancer chemotherapy and radiation therapy to the abdomen and pelvic area are used as combined therapeutic modality.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.10
• /
• pp.25-34
• /
• 2002

In this paper, silicidation induced Schottky contact area was obtained using the current voltage(I-V) characteristics of shallow cobalt silicided p+-n and n+-p junctions. In reverse bias region, Poole-Frenkel barrier lowering influenced predominantly the reverse leakage current, masking thereby the effect of Schottky contact formation. However, Schottky contact was conclusively shown to be the root cause of the modified I-V behavior of n+-p junction in the forward bias region. The increase of leakage current in silicided n+-p diodes is consistent with the formation of Schottky contact via cobalt slicide penetrating into the p-substrate or near to the junction area and generating trap sites. The increase of reverse leakage current is proven to be attributed to the penetration of silicide into depletion region in case of the perimeter intensive n+-p junction. In case of the area intensive n+-p junction, the silicide penetrated near to the depletion region. There is no formation of Schottky contact in case of the p+-n junction where no increase in the leakage current is monitored. The Schottky contact amounting to less than 0.01% of the total junction was extracted by simultaneous characterization of forward and reverse characteristics of silicided n+-p diode.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.3
• /
• pp.146-151
• /
• 2000

So fine cobalt oxide xerogel powders were prepared by using a unique solution chemistry associated with the sol-gel process. The effect of thermal treatment on the crystalinity, particle structure, and corresponding electrochemical properties of the resulting xerogel remained amorphous as $Co(OH)_2$ up to $160^{\circ}C$ With an increase in the temperature above $200^{\circ}C$, both the surface area and pore volume decreased sharply, because the amorphous $Co(OH)_2$ decomposed to form CoO that was subsequently oxidized to form crystalline Co304. In addition, the changes in the crystallinity, and particle structure all had significant but coupled effects on the electrochemical properties of the xerogels. A maximum capacitance of 192F1g was obtained for an electrode prepared with the $CoO_x$ Xerogel calcined at$150^{\circ}C$, which was consistent with the maxima exhibited in both the surface area and pore volume. This capacitance was attributed solely to a surface redox mechanism.

• Resources Recycling
• /
• v.24 no.4
• /
• pp.32-37
• /
• 2015

Cobalt is abundant only in some countries including Democratic Republic of the Congo. It would be necessary to secure overseas Co ores and Co extraction technology. Two kinds of matte varying the sulfur content were manufactured by smelting reduction of Co concentrate containing ~8 wt% Co, ~19 wt% Cu, and ~3 wt% Fe. The amount of Co, Cu and Fe was concentrated to 19~21 wt%, 39~41 wt%, and 7~9 wt% respectively in the resulting matte. High-pressure leaching of matte was performed in an autoclave with considering the effect of oxidizing agent, $H_2SO_4$ concentration as a lixiviant, and the amount of sulfur added to the matte. An oxidizing agent (oxygen) is necessary to improve Co leaching efficiency enabling usage of a dilute $H_2SO_4$ leaching agent. An increase in $H_2SO_4$ concentration prevents selective leaching of Co, and the sulfur content in matte has a minor influence on the Co leaching efficiency.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.1
• /
• pp.1-8
• /
• 2016

PURPOSE. The purpose of this study was to evaluate the efficacy of two different metal conditioners for non-precious metal alloys for the bonding of porcelain to a cobalt-chromium (Co-Cr) alloy. MATERIALS AND METHODS. Disk-shaped specimens ($2.5{\times}10.0mm$) were cast with Co-Cr alloy and used as adherend materials. The bonding surfaces were polished with a 600-grid silicon carbide paper and airborne-particle abraded using $110{\mu}m$ alumina particles. Bonding specimens were fabricated by applying and firing either of the metal conditioners on the airborne-particle abraded surface, followed by firing porcelain into 5 mm in diameter and 3 mm in height. Specimens without metal conditioner were also fabricated. Shear bond strength for each group (n=8) were measured and compared (${\alpha}=.05$). Sectional view of bonding interface was observed by SEM. EDS analysis was performed to determine the chemical elements of metal conditioners and to determine the failure modes after shear test. RESULTS. There were significant differences among three groups, and two metal conditioner-applied groups showed significantly higher values compared to the non-metal conditioner group. The SEM observation of the sectional view at bonding interface revealed loose contact at porcelain-alloy surface for non-metal conditioner group, however, close contact at both alloy-metal conditioner and metal conditioner-porcelain interfaces for both metal conditioner-applied groups. All the specimens showed mixed failures. EDS analysis showed that one metal conditioner was Si-based material, and another was Ti-based material. Si-based metal conditioner showed higher bond strengths compared to the Ti-based metal conditioner, but exhibited more porous failure surface failure. CONCLUSION. Based on the results of this study, it can be stated that the application of metal conditioner is recommended for the bonding of porcelain to cobalt-chromium alloys.