• Bulletin of the Korean Chemical Society
• /
• 제20권6호
• /
• pp.715-719
• /
• 1999

The incorporation of cobalt into mesoporous molecular sieves MCM-41 and MCM-48 was carried out. Co-PO/MCM41 and Co-PO/MCM48 were prepared using Co(II) acetate solution adjusted to pH = 3.0 with phosphoric acid by the incipient wetness method. Photoacoustic spectroscopy (PAS) was used to study the local environments of Co(II) incorporated into mesopores. The band around 500 nm in PAS of as-prepared Co-PO/MCM41 and Co-PO/MCM48 with Co(II) acetate solution was changed to triplet bands around 600 nm. This could be assigned to the 4 A2(F)-> 4T1(P) transition of Co(II) surrounded tetrahedrally by oxygen ions after calcination. It may be attributable to that the octahedral cobalt species containing phosphate ligands in coordination sphere reacting with framework's silanol groups to be dispersed atomically onto the surface of mesoporous molecular sieves as a tetrahedral species. This is unlike that the Co in Co-Cl/MCM41 and direct-synthesized Co-MCM41 transforms to Co oxide phase upon calcination. Co-PO/MCM41 and Co-PO/MCM48 were stable while treated with water.

• 한국태양에너지학회 논문집
• /
• 제31권4호
• /
• pp.48-56
• /
• 2011

Black cobalt solar selective coatings were prepared by thermal oxidation of electroplated cobalt metal on copper and nickel substrates. The optical properties and structure of the black cobalt selective coating for solar energy utilizations were characterized by glow discharge spectrometry (GDS), ultraviolet-visible-near infrared (UV-VIS-NIR) spectrometer, atom force microscopy(AFM) and X-ray photoelectron spectroscopy(XPS). The optical properties of optimum black cobalt selective coating prepared on copper substrate were a solar absorptance of 0.82 and a thermal emittance of 0.01. From the GDS depth profile analysis of these coatings, the concentration of cobalt particles near the interface was higher than at the surface, but oxygen concentration at the surface was higher than at the interface. These results suggest that the selective absorption was dominated by this chemical composition variation in the coating. The surface of this film exhibited morphology with root-mean-square(rms) roughness of about 144.3nm. XPS measurements data showed that several phases of Co coexist($Co_3O_4$,CoO) in the film.

• 자원리싸이클링
• /
• 제11권3호
• /
• pp.10-16
• /
• 2002

폐리튬이온전지로부터 추출한 $LiCoO_2$의 침출에서 황산, 질산과 같은 강산은 Co와 Li을 완전 용해시키므로 Co와 Li을 분리하여 회수하기 위해서는 별도의 공정이 필요하다. 낮은 pH에서 Co oxalate의 용해도가 낮다는 점을 착안한 oxalic acid 침출에서 양극활물질로부터 Co를 선택적으로 회수하는 연구를 수행하였다. 변수실험으로 도출된 최적조건, oxalic acid 3M, 침출온도 $80^{\circ}C$, 초기 광액농도 50g/L.의 조건에서 순수한 $LiCoO_2$를 침출한 결과, Li이 95% 이상 용해되는 반면에 Co는 1% 이하의 침출율을 나타내었다. 같은 침출조건에서 폐리튬이온전지로부터 선별한 양극활물질을 침출한 결과, Co와 Li의 침출율은 각각 0.25%, 99%로 높은 선택성을 보였다. 용액 중에 잔류하는 Li은 $Na_2$$CO_3$혹은 LiOH을 첨가하여 Li 탄산염 흑은 Li 수산화물의 형태로 회수할 수 있다.

• 한국재료학회지
• /
• 제23권5호
• /
• pp.271-275
• /
• 2013

Cobalt (Co) compounds have been used for centuries to impart rich blue color to glass, glazes and ceramics. Cobalt monoxide (CoO), an oxide of Co, is an inorganic compound that has long been used as a coloring agent in the ceramic industry. Unlike other coloring agents, CoO can be used to develop colors other than blue, and several factors such as its concentration in the glaze and firing condition have been suggested as possible mechanisms. For example, CoO produces a typical blue color called "cobalt blue" at very low concentrations such as 1 wt% in both oxidation and reduction firing conditions; a higher concentration of CoO (5 wt%) develops a darker blue color under the same firing conditions. Interestingly, CoO also develops a purple color at high concentrations above 10 wt%. In this study, we examined the applicability and mechanism of a novel purple glaze containing cobalt(II, III) oxide, one of the well characterized cobalt oxides. Experimental results show that an Augite crystal isoform (Augite-Fe/Co) in which Fe was replaced with Co is the main component contributing to the formation of the purple color. Based on these results, we developed a glaze using chemically synthesized Augite-Fe/Co crystal as a color pigment. Purple color glaze was successfully developed by the addition of 6~15 wt% of $Co_3O_4$ to magnesia lime.

• 대한화학회지
• /
• 제34권6호
• /
• pp.569-581
• /
• 1990

DMF 용매에서 산소 첨가된 네자리 Schiff base cobalt(III)의 균일 촉매에 의하여 2,6-di-tert-butylphenol의 산화 주생성물인 2,6-ditert-butylbenzoquinone (BQ)일 때에는 O$_2$/Co몰 결합비가 1:1인 superoxo cobalt(III) 착물 곧 [Co(III)(Schiff base)(L)]$O_2$ (Schiff base; SED, SOPD and o-BSDT, L; DMF and Py)들의 활성촉매에 의하여 생긴다. 또, 산화생성물인 3,3',5,5'-tetra-tert-butyldiphenoquinone (DPQ)은 $O_2$/Co의 몰비가 1:2인 $\mu$-peroxo cobalt(III) 착물인 [Co(III)(SND)(L)]$_2$O$_2$ (L; DMF 및 Py)의 활성촉매에 의하여 생성된다. 이들 균일 활성촉매인 superoxo 및 $\mu$-peroxo cobalt(III) 착물들의 확인은 DMF나 DMSO 용매에서는 어렵다. 그러나 pyridine 용매에서는 산소흡착에 의한 PVT 법과 0.1 M TEAP의 지지전해질과 유리질 탄소전극을 사용한 순환 전압전류법으로 1:1 oxygen adduct인 superoxo 착물들은 $O_2$-의 prewave가 없는 3단계 환원과정으로만 일어나는 것으로 확인할 수 있었다.

• 한국수소및신에너지학회논문집
• /
• 제20권2호
• /
• pp.116-124
• /
• 2009

We investigated the influences of cobalt coating deposited by DC electroplating on the ferritic stainless steel, STS 430, as a protective layer on a metallic interconnect for SOFC applications. Cobalt coated STS 430 revealed a uniform and denser-packing oxide surface and a reduced growth rate of $Cr_2O_3$ scales after oxidation at $800^{\circ}C$in air. Cobalt coating layer was oxidized to $CoCo_2O_4$ and Co containing mixed oxide spinels such as $Co_2CrO_4$, $CoCr_2O_4$, and $CoCrFeO_4$. The area specific resistance value of Co coated sample was $0.020\;{\Omega}cm^2$ lower than that of uncoated at $800^{\circ}C$ in air during 500 h. After 1000 h oxidation, cobalt oxide coating layer suppressed chromium outward diffusion.

• Corrosion Science and Technology
• /
• 제19권1호
• /
• pp.8-15
• /
• 2020

In this paper, the efficiency and the inhibition mechanisms of cobalt salts (cobalt nitrate and cobalt-exchange silica Co/Si) for the corrosion protection of AA2024 were investigated in a neutral aqueous solution by using the electrochemical impedance spectroscopy (EIS) and polarization curves. The experimental measurements suggest that cobalt cation plays a role as a cathodic inhibitor. The efficiency of cobalt cation was important at the concentration range from 0.001 to 0.01 M. The formation of precipitates of oxides/hydroxides of cobalt on the surface at low inhibitor concentration was confirmed by the Scanning Electron Microscopy/Energy Dispersive X-Ray Spectroscopy (SEM/EDS) analysis. EIS measurements were also conducted for the AA2024 surface covered by water-based epoxy coating comprising Co/Si salt. The results obtained from exposure in the electrolyte demonstrated the improvement of the barrier and inhibition properties of the coating exposed in the electrolyte solution for a lengthy time. The SEM/EDS analysis in artificial scribes of the coating after salt spray testing revealed the release of cobalt cations in the coating defect to induce the barrier layer on the exposed AA2024 substrate.

• Journal of Electrochemical Science and Technology
• /
• 제6권4호
• /
• pp.111-115
• /
• 2015

In this work electrochemical oxidation of Ascorbic acid (AA) on the surface of Cobalt nano particle modified carbon paste electrode (CoNPsMCPE) was studied in alkaline media. CoNPs were green synthesized using Piper longum and a mixture of 5% (w/w) of it were made with carbon paste. CoNPs showed good electrocatalytic activity in alkaline media. Cyclic voltammetry (CV) and chronoamperometry (CA) were used to study the electrochemical performance of CoNPsMCPE. The number of monolayers on the surface of electrode was calculated as 1.08×10⁹ mol cm⁻² that is equal to that of metal Cobalt electrode. Diffusion coefficient of AA was determined using CA analysis which was equal to 1.5×10⁻⁶cm² s⁻¹.

• 전자공학회논문지A
• /
• 제33A권2호
• /
• pp.122-130
• /
• 1996

In an effort to learn more about the reaction mechanisms which lead to the compound nucleation at the interface of cobalt and silicon, electrical noise properties has been investigated for cobalt thin films deposited on silicon substrates by the electron beam evaporation and rf sputtering techniques. Microstructural variations at the Co/Si interfaces have been observed by transmission electronmicroscopy. Amorphous structures are observed at the Co/Si interfaces for samples whose cobalt thicknesses are less than 4nm and a polycrystalline compound nucleation has been occurred for thicker films. 1/f noise power same samples, and the spetral density has been normalized. The amplitude of 1/f noise power spectral density shows a gradual increase as the cobalt thickness is increased, and the amplitude has dropped abruptly after the compound nucleation. The variations of the noise parameters areassumed to be an indiction of the phase transformation along the nucleation reaction path, and amplitude has been interpreted as instabilities of the Co/Si interfacial structures.

• 대한화학회지
• /
• 제10권1호
• /
• pp.4-10
• /
• 1966

A new method of cobalt determination has been developed by employing ethylenediamine tetrabutyl acetate(EDTA-butyl ester) synthesized from EDTA and Butyl alcohol. The synthesized EDTA ester dissolved in butyl alcohol extracts various metal ions from aqueous solutions. Cobaltous ion extracted into organic phase containing EDTA ester to form Co (II)-EDTA butyl ester complex is back extracted into alkaline aqueous phase forming a stable pink colored complex of Co (III). The optimum condition for spectrophotometric determination of cobalt via the new complex has been established. The absorption peak occurs at 540$m{\mu}$ and Beer's law was obeyed over the concentration range of 0∼50 ${\mu}g/ml$ of cobalt.