• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.2
• /
• pp.192-197
• /
• 2012

In this paper, a non-contact microwave technique was presented to detect the surface crack of the metals. An open-ended coaxial cable line was used as a sensor at 11 GHz, and the reflection coefficients were measured by scanning along the metal surface including artificial surface cracks. A parameter, the K value which was defined as the difference between maximum and minimum reflection coefficients, was measured and used to estimate the crack depth. A linear relationship between the K value and crack depth was found. This study showed that non-contact detection of the surface cracks of metals is possible using the open-ended coaxial line sensor at X-band.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.4
• /
• pp.351-358
• /
• 2002

To determine a scattering performance of a rectangular waveguide with two skewed conducting posts in approximation by the mode matching method and the generalized scattering method is presented in this paper. We determined the optimized result from effective analysis to select the adequate eigenmode number in mode matching method for the skewed two conducting posts. And we obtained the scattering performance of the junction of the waveguide to coaxial line with two skewed conducting posts by application of above method. By this result, it can be seen that the transmission performance at output port of waveguide to coaxial line is 3 ㏈ at the angle, 50°And we obtained the reflection performance to decrease linearly along the skewed angle at input port.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.10
• /
• pp.7-12
• /
• 1998

The wave reflections from several types of open-ended coaxial probes contacted on the various materials have been analyzed precisely by using the finite-difference time-domain(FDTD) technique in this paper. Due to the coordinate transformation from three-dimension to two-dimension, the computation was performed very efficiently. It was found that the reflection from an open-ended coaxial probe reduces as frequency or diameter of a coaxial line increases. The reflections from multi-layered media were also analyzed by the FDTD method. This analysis technique was verified by comparison with measurements and theoretical computations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.5
• /
• pp.788-795
• /
• 2000

In this paper, a method for the precise impedance measurement of coaxial loads using an offset open and short as the reflection standards and reference air lines with different lengths as the impedance standards is proposed. Measured input impedances of power sensors and thermistor mounts obtained from SWR bridges(5~400MHz) and a vector network analyzer(100~1,000MHz) are presented in the frequency range of 5MHz to 1,000 MHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.7
• /
• pp.973-984
• /
• 1999

This paper presents a method of moments with the transmission line theory to analyze the sleeve dipole array antennas and analyses characteristics of that. There were several considerations for analysis of the method of moments. First, the method of moments were applied at both of the sleeve dipole elements and the coaxial line because the current flows on both of them. Second, the feed voltages of each sleeve dipole element were obtained by using a transmission line theory because the feeding structure is fed by coaxial line in series. Third, the series reactance between the coaxial line and the open side of the sleeve was considered as impedance loading on the antenna. The radiation patterns and current distributions from the numerical results were considered as variation of the feed distances and frequencies. To verify the validity of our method, 4 elements sleeve dipole array antennas with 1 λg distance were fabricated and measured, and then the measured radiation patterns were compared with the numerical results. The measured results were confirmed a good agreement with the numerical results.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2004.12a
• /
• pp.196-197
• /
• 2004

• Proceedings of the Korean Magnestics Society Conference
• /
• 2008.12a
• /
• pp.33.2-33.2
• /
• 2008

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.2
• /
• pp.39-44
• /
• 1994

A theoretical method has been considered for the analysis of a cylindrical edge-slot antenna which belongs to a class of circumferential slot antennas that are suitable for conformal mounting on conducting bodies of revolution. A coupled integral equation is formulated for unknown magnetic currents of both the coaxial aperture and the edge slot, and solved by the moment method. Theoretical values for reflection coefficient obtained based upon the method are compared with our experimental values and other author's results available. There arre good agreement between them.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.271-271
• /
• 2012

Many studies have been investigated on high density plasma source (Electron Cyclotron Resonance, Inductively Coupled Plasma, Helicon plasma) for large area source after It is announced that productivity of plasma process depends on plasma density. In this presentation, we will propose the new concept of the multiple source, which consists of a parallel connection of ICP sources and helicon plasma sources. For plasma uniformity, equivalent power (especially, equivalent current in ICP & Helicon) should distribute on each source. We design power feeding line as coaxial transmission line with same length of ground line in each source for equivalent power distribution. And we confirm the equivalent power distribution with simulation and experimental result. Based on basic study, we develop the plasma source for oxidation in semiconductor process. we will discuss the relationship between the processing parameters (With or WithOut magnet, operating pressure, input power ). In ICP, plasma density uniformity is uniform. In ICP with magnet (or Helicon) plasma density is not uniform. As a result, new design (magnet arrangement and gas distributor and etc..) are needed for uniform plasma density in ICP with magnet and Helicon.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.387-388
• /
• 2008

This paper presents the design approach and test results of the Q-band precision subminiature coaxial adaptor based on transmission line theory using multi-step impedance and air-holes to increase its cutoff frequency. In order to increase the frequency performance, the adaptor is designed with hooked structure, fixing step, multi-air-holes, and outer conductor. The return loss increments due to the hooked structure and multi air-holes are minimized to 2 dB and 1.5 dB, respectively. A VSWR(Voltage Standing Wave Ratio) of <1.2 is obtained from DC to 40 GHz, while guaranteeing the durability of the adaptor from room-temperature$(25^{\circ}C)$ to $120^{\circ}C$.