• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.3
• /
• pp.222-227
• /
• 2010

ZnO nanorods array have been grown on the seed crystal coated Si(100) substrate by hydrothermal method. The growth, structural and optical properties of ZnO nanorods array were investigated with a variation of precursor concentration from 0.01 M to 0.04 M. The array density of grown ZnO nanorods per same area was increased with increasing the concentration of precursor solution. Vertically aligned ZnO nanorods with hexagonal wurtzite structure have highly preferred c-axis orientation along (002) lattice plane. Especially, ZnO nanorods array developed from 0.04 M precursor solution showed a diameter of about 85 nm and length of 1.2 {\mu}m$ without any crystallographic defects. The photoluminescence spectra of ZnO nanorods from heavier precursor concentration exhibited stronger UV emission around 380 nm corresponding with near-band-edge emission.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.526-529
• /
• 2002

Various fluoride films on a glass substrate were prepared and characterized in order to determine the best seed layer for a microcrystalline silicon (${\mu}c$-Si) film growth. Among the various group-IIA-fluoride systems, the $CaF_2$films on glass substrates illustrated (220) preferential orientation and a lattice mismatch of less than 0.7% with Si. $CaF_2$ films exhibited a dielectric constant between $4.1{\sim}5.2$ and an interface trap density ($D_{it}$ as low as $1.8{\times}10^{11}\;cm^{-2}eV^1$. Using the $CaF_2$/glass structure, we were able to achieve an improved ${\mu}c$-Si film at a process temperature of 300 $^{\circ}C$. We have achieved the ${\mu}c$-Si films with a crystalline volume fraction of 65%, a grain size of 700 ${\AA}$, and an activation energy of 0.49 eV.

• Korean Journal of Environmental Agriculture
• /
• v.25 no.3
• /
• pp.228-235
• /
• 2006

Pseudomonas aeruginosa $GRC_2$, siderophore-producing strain, inhibited growth of Macrophomina phaseolina in vitro and reduced charcoal rot in seeds of Brassica juncea in field when coated with adaptive strains. P. aeruginosa $GRC_2$ and Azotobacter chroococcum $AC_1$ produced indole-3-acetic acid and solubilized insoluble phosphate. A. chroococcum $AC_1$ fixed nitrogen asymbiotically. Urea and diammonium phosphateadaptive variant strains of P. aeruginosa and A. chroococcum strongly inhibited M. phaseolina in comparison to parental strains. Bacterization of seeds induced seed germination, seedling growth, and enhanced yield of B. juncea by 10.87% as compared to full doses of urea and diammonium phosphate. Both adaptive strains of chemical fertilizers aggressively colonized roots, showing effectiveness to growth and developments of B. juncea.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.12
• /
• pp.841-846
• /
• 2016

ZnO nanorods were grown on $SiO_2$ coated Si wafers and glass by the hydrothermal method. The structural and optical properties variation of ZnO nanorods as a function of growing time was studied. ~10 nm-thick ZnO thin films deposited on substrates by rf magnetron sputtering were employed as seed layers. Zinc nitrate hexahydrate (0.05 M) and hexamethylenetetramine (0.05 M) mixed in DI water were used as a reaction solution. ZnO nanorods were respectively grown for 30 min, 1 h, 2 h, 3 h, and 4 h by maintaining the reactor at $90^{\circ}C$. Crystallinity of ZnO nanorods was analyzed by X-ray diffraction, and the morphology of nanorods was observed by a field emission scanning electron microscope. Transmittance and absorbance were measured by a UV-Vis spectrophotometer, and energy band gap and urbach energy were obtained from the data. Photoluminescence measurements were carried out using Nd-Yag laser (266 nm).

• Bulletin of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.129-132
• /
• 2009

Monodisperse ZnS colloidal particles with precisely specified diameters over a broad size range were synthesized by controlled aggregation. Sub-10nm ZnS seed crystals were first nucleated at ambient temperature and then grown at an elevated temperature, which produced large polydisperse colloidal particles. Subsequent rapid thermal quenching and heating processes induced a number of secondary nucleations in addition to growing the large polydisperse microparticles which were finally removed by centrifugation and discarded at the completion of the reaction. The secondary nuclei were then aggregated further at elevated temperatures, resulting in colloidal particles which exhibited a nearly monodisperse size distribution. Particle diameters were controlled over a wide size range from 50 nm to 1 μm. Mie simulations of the experiment extinction spectra determined that the volume fraction of the ZnS is 0.66 in an aggregated colloidal particle and the colloidal particle effective refractive index is approximately 2.0 at 590 nm in water. The surface of the colloidal particles was subsequently coated with silica to produce ZnS@silica core-shell particles.

• Journal of the Korean institute of surface engineering
• /
• v.26 no.3
• /
• pp.149-157
• /
• 1993

In the study of TAB(Tape Automated Bonding)technologies, Cu-Cr sputtered seed layer has been used to improve the adhesion between Polyimide and Cu film and electrical properties. But the Cu electrodeposit on Cu-Cr film had poor adhesion or powder-like form due to the surface Cr oxides on the Cu-Cr film. By means of activating the Cu-Cr film with the oxalic acid and phosphoric acid, the Cu film with the improved adhesion could be coated on the Cu-Cr sputtered film in CuSO4 solution. The etching rate was compared with increasing the Cr content of the sputtered Cu-Cr film, and anodic polarization curve in FeCl3 solution was investigated. With increasing the Cr content, the etching rate was reduced. The clean etching cross section could be obtained with increasing the concentration of FeCl3 solution. But above the 13 w/o Cr content, Cu-Cr sputtered film could not bed etched cleanly only with FeCl3 solution and additives were needed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.11
• /
• pp.1794-1798
• /
• 2004

We present a fabrication method of high aspect ratio 100nm-scale nickel stamper using e-beam writing for the injection molding of optical grating patterns. Conventional nickel stamper is fabricated by nickel electroplating process which is followed by seed layer deposition. In this paper, we have used chrome coated blank mask without anti-reflection layer of CrON in order to simplified electroplating process. In experimental study, we have optimized electron-beam dosage for 100nm-scale optical grating patterns with 2.5-aspect ratio, and fabricated nickel stamper using above grating patterns as PR mold. Fabricated nickel stamper have showed height of 240$\pm$20nm and width of 116$\pm$6nm.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.2
• /
• pp.145-156
• /
• 1996

The effects of priming with different polyethylene glycol (PEG 6, 000) solutions on the germination, emergence characteristics and early plant growth in rice, barley and wheat were investigated. Rice, barley and wheat seeds were subjected to various priming conditions of osmotic potentials (-0. 75, -1.00 and -1.50 MPa) of PEG, and incubation period were 5 days at 25, 20, 2$0^{\circ}C$, respectively. The percentage of water absorption was highest in barely, and lowest in rice, and all the treatments enhanced water absorption in barley, but showed no significant effects in rice and wheat. Respiration quotient was lower than none PEG treatment seeds, and those of barley and wheat were higher than rice regardless of PEG concentration, and that of rice increased with high PEG concentration. Total germination percentage of osmoconditioning seeds with PEG was higher than that of none treatment seed, and those of barley and wheat were significant. The artificially deteriorated seeds with PEG treatment seeds after ageing treatment could recover to nearly the same germination level as that of the control seeds. The effects of coating polymer were higher than osmoconditioning with PEG, and germination characteristics in rice showed varietal difference at PVP and waterlock at recoated seeds after PEG treatment. Osmoconditioning with PEG reduced mean germination and emergence time, but there was no difference among PEG concentrations. The plant height of PEG treaed seed in rice was taller and those of barely and wheat showed varietal difference, and those of polymer-coated seed after PEG treatment were different among the polymers. The dry weight of PEG treatment were different among the crops, and those were increased with the high PEG concentration. The emergence percentage of PEG-treated seed were higher than none-treated seed, and those were decreased with the increased PEG concentration, and the highest emergence percentage of rice, barley and wheat were 90, 50 and 50% soil moisture content, respectively. The time to emergence in rice was longer than barley and wheat, and those in rice was shortened in high soil moisture content, and barley and wheat were shortened in low soil moisture content.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.21 no.1
• /
• pp.49-59
• /
• 2019

The field trial was performed to evaluate the rice growth and yield in different direct seeding methods after Italian Ryegrass Harvest The required time for seed emergence was for 7 ~ 8days in the tested direct seeding methods and there was high in seedling establishment in order of wet hill-seeding with iron-coated seeds > water seeding with iron-coated seeds > wet hill-seeding with soil coverage with pregerminated seeds. The rice plant height was shorter in the tested direct seeding methods than that of machine transplanting until 45day after seeding but there was not significant difference in terms of statistical analysis at 63day after seeding. The growth of tiller number in the rice plant was high in water seeding with iron-coated seeds and wet hill-seeding with soil coverage and low in wet hill-seeding with iron-coated seeds compared to machine transplanting. The yield component in the tested direct seeding methods was not significant difference in terms of statistical analysis. The milled rice yield in the tested direct seeding methods was higher 2 ~ 8% being with 4.94 ~ 5.24t/ha than that of machine transplanting but there was not significant difference in terms of statistical analysis. The percentage of head rice was low in the tested direct seeding methods compared to machine transplanting. The weedy rice was not occurred in the tested rice cultivation methods. In conclusion the direct seeding method would be recommended to be a suitable to in following by Italian ryegrass harvesting in southern area of Korea in terms of reduction in production cost and high income basis for rice growing farmers.

• Korean Journal of Organic Agriculture
• /
• v.23 no.2
• /
• pp.373-390
• /
• 2015

This study investigated the effect of coated feed using mixed oil on rumen fermentation characteristics. Two experiments were conducted based on materials that were mixed. First, cashew nut and soybean oils were mixed with white mineral oil. And second, different plant extracts were mixed with white mineral oil. At first experiment, inclusion levels of mixed oil on diet (0.03%, 0.1%, 0.5%) were applied as variables. A coated diet was fermented with rumen inoculum according to in vitro rumen fermentation and its parameters were investigated. In the result of first experiment, no negative effects on rumen pH were found. Significantly decreased dry matter digestibility was detected at 0.5% treatment (P<0.05). Total gas productions in control and 0.03% were significantly greater than those of others (P<0.05). Significantly reduced methane productions were found in all treatments compared to the control (P<0.05). Inclusion of mixed oil did not affect on ammonia production. Total volatile fatty acid production was also not influenced by coating with mixed oils. Rumen fermentation parameters were greatly changed according to introduced plant extracts at second experiment. The significantly lowest and greatest ammonia productions were found at treatments with Ixeris dentata and Plantago asiatica, respectively (P<0.05). The significantly greatest acetate and propionate productions were detected at treatments with Crucuma longa and Zizyphus vulgaris 1, respectively (P<0.05). All treatments, except Chrysanthemum idicum, Euyale ferox seed, Moringa leaf and fruit and Zizyphus vulgaris 1, showed significantly increased total volatile fatty acid production compared to the control (P<0.05). Only Paeonia lactiflora showed significantly lesser gas production than the control (P<0.05). In methane production, Ceramium, Zizyphus, Paeonia, Agrimonia, Torilis, Mugwort, Foeniculum, Euphorbia, Taraxacum, Artemisia, Momordica, Curcuma and Moringa reduced methane significantly compared to the control (P<0.05).