• Journal of Korean Society of Rural Planning
• /
• v.22 no.4
• /
• pp.13-24
• /
• 2016

Tourism is often considered as one of the main industries to promote development and modernization in small South Pacific islands countries. In Fiji, this was recognized in the 1960s, and resulted in large-scale resort based tourism development in coastal areas. While tourism has obvious advantages to the economy, a lot of problems such as exclusive foreign control of the main hotels and resorts, considerable overseas leakage of earnings, the limited participation by indigenous resource owners, and localized environmental damages to reefs and mangroves are emerging. For sustainable tourism development, it is needed to set growth objectives and targets for tourism in terms of benefits to Fiji, and to concentrate support on 'Rural Tourism' such as community-based tourism that have lower leakage and put more into local economies. Through case study in this paper, to develop rural tourism at the local level, several recommendations are as follows: 1) to introduce various rural tourism programs such as experiencing Fiji's traditional culture, participating in activities, picking fruits and harvesting agro-products, 2) to enhance aggressive promotion and marketing strategies, 3) to build the capacity of local communities for improving the quality of tourism services, and 4) to provide the infrastructure for tourism business such as road accessing, water supply and disaster prevention.

• Journal of Environmental Science International
• /
• v.10 no.3
• /
• pp.209-216
• /
• 2001

Dustfall particles were collected by the modified American dust jar (wide inlet bottle type) at 6 sampling sites in Pusan area from March, 1999 to February, 2000. Thirteen chemical species (Al, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, Ni, Pb, Si, and Zn) were analyzed by AAS and ICP. The purposes of this study were to estimate qualitatively various bulk deposition flux of dustfall and insoluble components by applying regional and seasonal distribution. Dustfall amount of regional variations were found in order of coastal zone, industrial zone, commercial zone, agricultural zone and residential zone, and seasonal total dustfall had higher concentrations during spring for 6.741 ton/${km}^2$/season, lower concentrations during summer for 1.989 ton/${km}^2$/season, and annual total concentration was 17.742 ton/${km}^2$/year. The regional distributions of enrichment factor show well-defined anthropogenic metals (Cd, Cu, Pb, and Zn) at industrial and agricultural zone, and contribution rate of soil particles were found in order of summer, fall, winter and spring. Factor loading effects of chemical composition of dustfall were found in order of road traffic emission source and combustion processed source, industrial activity source, soil source and marine source.

• Journal of architectural history
• /
• v.28 no.6
• /
• pp.55-65
• /
• 2019

Ganggyeong, a city which is located at riverside of Geum River, played a role to connect the inland cities and the coastal cities through the Geum river waterway. In Chosun dynasty, Ganggyeong was one of the three major markets in Korea, and at the same time, it was one of the two river docks in Korea. However, after the railway was installed in Korea, railroad was more important than waterway in transporting logistics and in 1911 Honam railroad and Ganggyeong railway station was installed. Thus it was necessary to reorganize urban structure of Ganggyeong city from the traditional river-dock city to modern railroad city. In addition, urban infrastructure to prevent flood damage was needed because Ganggyeong suffered from floods and water shortages every year. Therefore, between 1910s and 1930s large-scale social infrastructures including road, water and sewage system, river bank, floodgate was constructed not only to revitalize the declining city but also to prevent flood damage and water shortages that hinder urban development. The installation of urban infrastructure has enabled the urban expansion and development of Ganggyeong city, and it is still served as a basic urban structure.

• Spatial Information Research
• /
• v.16 no.3
• /
• pp.343-357
• /
• 2008

Hongdo and Huksando belong to the Dadohae national park parks in Korea and are famous sightseeing spots in Shinahn-gun. One of the keystone species in this area is otter (Lutra lutra). We accomplished field works for finding its present habitat and condition analyses for the potential habitat in the area via spatial analyses with digital elevation model and satellite imagery. Isolated condition with coastal cliffs was one of the superior conditions over habitat in the main land, but the road kills of small animals were also observed. Three underground eco-corridors were suggested for the protection of otter habitat in the Shinahn-gun area. Regional development strategies of Shinahn-gun should be focused on the protection of safe and pristine habitat for otter population.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.5
• /
• pp.551-561
• /
• 2008

In order to clarify the impact of anti-heat insulation pavement on the thermal structure of atmospheric boundary layer, field experiments and numerical simulations were carried out. Field experiment with various pavements were also conducted for 24 hours from 09LST 19 June 2007. And numerical experiment mainly focused on the impact of albedo variation, which is strongly associated with thermal characteristics of insulated pavement materials, on the temporal variation of planterly boundary layer. Numerical model used in this study is one dimension model with Planterly Boundary Layer developed by Oregon State University (OSUPBL). Because anti-heat insulation pavement material shows higher albedo value, not only maximum surface temperature but also maximum surface air temperature on anti-heat insulation pavement is lower than that on asphalt. The maximum value of surface temperature only reach on $49.5^{\circ}C$. As results of numerical simulations, surface sensible heat flux and the height of mixing layer are also influenced by the values of albedo. Therefore the characteristics of urban surface material and its impact on atmosphere should be clarified before the urban planning including improvement of urban heat environment and air quality.

• Korean Journal of Environmental Biology
• /
• v.36 no.2
• /
• pp.174-179
• /
• 2018

Clithon retropictus has been protected by the Ministry of Environment as an endangered species since 1998 and has been listed on the state red list of endangered species category II. It is viewed as a representative for all endangered species in the northeastern coastal waters of Korea. Most of the habitats of C. retropictus have been found to be in an unstable state because of development projects such as road construction, small stream development, irrigation for securing agricultural water, and flood prevention. These habitats are damaged by small stream maintenance projects and development, and the risk of damage is increasing and active efforts are needed in order to protect them. Although the Ministry of Environment is striving to preserve this endangered species, the habitat of C. retropictus is still facing external threats because it spreads to only a small area at high densities. Therefore, in order to protect the habitat of C. retropictus, a level II endangered species, it is urgent to make an effort to minimize habitat damage and to take measures for its protection.

• Wind and Structures
• /
• v.14 no.1
• /
• pp.55-70
• /
• 2011

This study investigates the design criteria required for wind barriers to protect vehicles running on an expressway under a high side wind. At the first stage of this study, the lateral deviations of vehicles in crosswinds were computed from the commercial software, CarSim and TruckSim, and the critical wind speeds for a car accident were then evaluated from a predefined car accident index. The critical wind speeds for driving stability were found to be 35 m/s for a small passenger car, yet 30 m/s for a truck and a bus. From the wind tunnel tests, the minimum height of a wind barrier required to reduce the wind speed by 50% was found to be 12.5% of the road width. In the case of parallel bridges, the placement of two edge wind barriers plus one wind barrier at center was recommended for a separation distance larger than 20 m (four lanes) and 10 m (six lanes) respectively, otherwise two wind barriers were recommended.

• Journal of the Korean Institute of Navigation
• /
• v.15 no.3
• /
• pp.13-24
• /
• 1991

This paper aims to determining the optimal capacity of Pusan port in view point of Container Physical Distribution cost. It has been established a coast model of the container physical distribution system in Pusan port is composed of 4 sub-systems and in-land transport system. Cargo handling system, transfer & storage system and in-land transport system, and analyzed the cost model of the system. From this analysis, we found that the system had 7 routes including in-land transport by rail or road and coastal transport by feeder ship between Pusan port and cargo owner's door. Though railway transport cost was relatively cheap, but, it was limited to choose railway transport routes due to the introducing of transport cargo allocation practice caused by shortage of railway transport capacity. The physical distribution ost for total import & export container through Pusan port was composed of 4.47% in port entring cost, 12.98% in cargo handling cost, 7.44% in transfer & storage cost and 75.11% in in-land transport cost. Investigation in case of BCTOC verified the results as follows. 1) The optimal level of one time cargo handling was verified 236VAN (377TEU) and annual optimal handling capacity was calculated in 516, 840VAN(826, 944TEU) where berth occupancy is $\rho$=0.6 when regardless of port congestion cost, 2) The optimal level of one time cargo handling was verified 252VAN (403TEU) and annual optimal handling capacity was calculated in 502, 110VAN (803, 376TEU) where berth occupancy is $\rho$=0.58 when considering of port congestion cost.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.6
• /
• pp.63-74
• /
• 2010

In this study, wetlands and forest vegetation surrounding rail, road of DMZ area and Civilian Control Line were studied as follows: Plant communities hierarchical system of forest vegetation classified according to the results of phytosociological methods of Braun-Blanquet (1964) as; Quercus mongolica community, Quercus mongolica-Quercus variabilis community and Quercus acutissima -Quercus mongolica community. Wetland vegetation major communities; Scirpus wichurae community, Scirpus fluviatilis community, Juncus effusus var. decipiens community, Typha orientalis community, Typha angustata community, Juncus alatus community, Miscanthus sacchariflorus community, Phragmites communis-Miscanthus sacchariflorus community, Hragmites communis community, Phragmites communis-Alnus japonica community, Alnus japonica community, Phragmites japonica community, Salix koreensis community, Prunus padus community, Alnus japonica community, Zizania latifolia community and Amorpha fruticosa community were surveyed. Coastal sand dune vegetation in a DMZ area and the Civilian Control Line was mainly characterized by; Carex pumila, Elymus mollis, Carex kobomugi, Rosa rugosa, Calystegia soldanella, Lathyrus japonica and Aster hispidus, species that are of typically sand dune vegetation.

• Journal of the Korean Society of Safety
• /
• v.26 no.4
• /
• pp.127-134
• /
• 2011

A traffic accident which happens in Expressway during dense fog is more likely to cause the sequential accidents and high death rate. So, the preventive measures shall be taken at dangerous areas to enhance the efficiency of roads and minimize the accidents and the resultant damages. So, it is necessary to find out the characteristics of freeway zone which has high risk of fog occurrence and to establish the comprehensive safety strategy on installation and operation of the safety equipment. In this study, I developed a fog forecasting model by using the freeway fog data. This model can be used as the fog forecasting model in dealing with fog problems when new road is planned. The model was developed by using a statistical analysis technique or the regression analysis, focusing on the variables such as geographical features and regional conditions, distances to water sources and the area of water source. I have segmented the models by classifying the area into inland area and coastal area. The distance to water source and area of the water source located around the freeway were found to be main factors causing fog.