• Advances in materials Research
• /
• 제7권2호
• /
• pp.105-118
• /
• 2018

Magnesium and its alloys are attracted towards all engineering applications like automotive, marine, aerospace etc. due to its inherent high strength to weight ratio. But, extensive use of Mg alloys is limited to the current scenario because of low wear and corrosion resistance behavior. However, equal channel angular press is one of the severe plastic deformation technique which has been effective method to improve the wear and corrosion resistance by achieving fine grain structure. In this study, the effect of grain refinement on wear and corrosion resistance of AZ80 Mg alloys were investigated. The wear behavior of the coarse and fine-grained Mg alloys was examined through $L_9$ orthogonal array experiments in order to comprehend the wear behavior under varies control parameters. It was shown that ECAPed alloy increased the wear and corrosion resistance of the Mg alloy through the formation of fine grain and uniform distribution of secondary ${\beta}-phase$. Also, the performance of AZ80 Mg alloy for these changeswas discussed through SEM morphology.

• 한국압력기기공학회 논문집
• /
• 제6권1호
• /
• pp.29-36
• /
• 2010

Ultrasonic inspection of heavy walled cast austenitic stainless steel(CASS)welds is very difficult due to complex and coarse grained structure of CASS material. The large size of anisotropic grain strongly affects the propagation of ultrasound by severe attenuation, change in velocity, and scattering of ultrasonic energy. therefore, the signal patterns originated from flaws can be difficult to distinguish from scattered signals. To improve detection and sizing capability of ID connected defect for heavy walled CASS piping welds, the low frequency segmented TRL Pulse Echo and Phased Array probe has been developed. The experimental studies have been performed using CASS pipe mock-up block containing artificial reflectors(ID connected EDM notch). The automatic pulse echo and phase array technique is applied the detection and the length sizing of the ID connected artificial reflectors and the results for detection and sizing has been compared respectively. The goal of this study is to assess a newly developed ultrasonic probe to improve the detection ability and the sizing of the crack in coarse-grained CASS components.

• 한국압력기기공학회 논문집
• /
• 제6권1호
• /
• pp.16-22
• /
• 2010

Cast austenitic stainless steel(CASS) is used in the primary cooling piping system of nuclear power plant for it's relative low cost, corrosion resistance and easy of welding. However, the coarse-grain structure of cast austenitic stainless steel can strongly affect the inspectability of ultrasonic testing. The major problems encountered during inspection are beam skewing, high attenuation and high background noise of CASS component. So far, the best inspection performance involving CASS components have been achieved using low frequency TRL(Transmitter/Receiver side-by-side L wave) angle beam probe. But TRL technique could not detect shallow defect and it contains an uncertainty for sizing capability. Currently, most of researchers are studying to overcome these challenge issue. In this study, low-frequency phased array TRL technique used to detect and sizing the flaws in CF8A cast austenitic stainless steel.As conclusion, we could detect and size not only axial flaw but also circumferential flaw using low frequency phased array technique.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.451-454
• /
• 2004

The reconfigurable architecture is increasingly important for design of multi-mode communication systems and computation-intensive DSP systems. The proposed coarse-grain architecture is based on a reconfigurable processing element consisting of a MAC unit, a register file, a context data register, and PE interconnect control blocks. The main feature of the Proposed architecture is the loop context which enables faster configuration. Also, we propose another area-efficient reconfigurable architecture with improved reconfigurability. The SystemC modeling results show that the proposed architecture can reduce 9 clock cycles of 2D DCT compared to existing architectures.

• 방송공학회논문지
• /
• 제24권1호
• /
• pp.182-185
• /
• 2019

본 논문에서는 프로그래머블 멀티포맷 비디오 복호화기를 구성하기 위한 기본 모듈들의 요구 성능을 분석하고 제안하였다. 제안한 플랫폼의 목적은 고성능 FHD 비디오 복호화기 구성이다. 제안한 복호화기는 재구성 가능한 프로세서, 전용 비트스트림 코프로세서, 메모리 제어기, 움직임 보상용 캐쉬 및 플렉서블 하드웨어 가속기 등으로 구성되었다. 300MHz 클럭을 사용했을 때 HEVC로 부호화된 초당 30 장의 FHD를 복호화 할 수 있는 모듈들의 성능에 대해서 분석하고 기본 성능을 제안하였다.