• 한국구조물진단유지관리공학회 논문집
• /
• 제21권1호
• /
• pp.30-39
• /
• 2017

이 연구에서는 순환굵은골재를 사용하여 31~38 MPa 범주의 압축강도를 갖는 콘크리트의 보의 휨강도 실험연구를 수행하였다. 천연굵은골재에 대한 순환굵은골재의 치환률과 철근비를 실험변수로 고려하였다. 순환굵은골재의 치환률로써 0, 30, 50 및 100%를 고려하였으며, 주철근의 철근비로써 0.50, 0.79 및 1.14%를 고려하였다. 4점 하중재하 시험방법을 통하여 순환골재 콘크리트 보의 균열 및 파괴거동, 하중-처짐 관계 특성을 파악하였다. 천연굵은골재 보와 순환굵은골재 보의 휨균열 형상은 거의 유사하며, 전반적으로 순환굵은골재 보의 균열간격이 천연굵은골재 보의 균열간격보다 작다. 순환골재치환률에 따른 균열폭 크기는 뚜렷한 차이를 나타내지 않는다. 또한, 설계기준에 의한 예측식을 이용하여 실험 부재의 휨강도를 산정하였다.현행 설계기준에 의한 순환골재 콘크리트 보의 휨강도 예측결과는 실제의 휨강도를 과소평가하여 보수적인 설계를 제공하는 것으로 나타난다.

• 대한토목학회논문집
• /
• 제39권4호
• /
• pp.485-492
• /
• 2019

본 연구는 순환 굵은 골재의 함수상태가 콘크리트의 압축강도에 미치는 영향을 물/결합재 비와 양생 조건을 변수로 하여 평가하였다. 표건상태의 순환골재는 콘크리트의 강도발현을 저하시켰는데, 이는 순환골재의 높은 흡수율에 의한 표면수의 증가로 골재와 시멘트 페이스트 사이의 부착강도가 저하되었기 때문이다. 골재의 종류와 함수상태가 물/결합재 비의 변화에 따라 압축강도에 미치는 영향의 정도는 비슷하였다. 그러나 양생조건에 대해서는 골재의 종류에 따라 상당한 차이를 보였다. 대기양생을 시킨 경우 높은 흡수율을 가진 순환골재는 수화작용에 필요한 수분을 감소시키고, 수분증발을 증가시켜 강도발현을 저해하였다. 순환골재의 함수상태는 콘크리트의 압축강도에 상당한 영향을 줬으며, 순환골재콘크리트 생산시 골재의 흡수율에 따른 함수상태에 대한 관리가 필요하다. 또한 순환골재 콘크리트의 경우 적절한 품질관리를 위해 양생관리가 매우 중요하다.

• Structural Engineering and Mechanics
• /
• 제67권3호
• /
• pp.283-290
• /
• 2018

This paper presents the results of a study that investigated the influence of using recycled coarse aggregate (RCA) and recycled asphalt pavement (RAP) on the properties of pervious concrete (PC). The natural aggregate (NA) was replaced by RCA and RAP in the PC with replacement levels of 0%, 20%, 40%, 60% and 80% by the total weight of NA, respectively. In addition to incorporating RAP and RCA in the same mixes with replacement levels of: (1) 20% RAP and 80% RCA; (2) 60% RAP and 40% RCA; and (3) 80% RAP and 20% RCA. Water permeability, thermal conductivity, density, porosity, void content, and compressive, splitting tensile and flexural strengths were studied in this paper. The results showed that using RCA, RAP, and (RAP-RCA) enhanced the properties of PC in general and improved the mechanical properties significantly in particular. The optimum mix was reported to be the 60% RAP and 40% RCA. Accordingly, the RAP has the potential to be used in PC in order to reduce the negative impact of RAP on the human health and environment.

• Structural Engineering and Mechanics
• /
• 제77권1호
• /
• pp.103-114
• /
• 2021

Ultra high strength concrete (UHSC) originally proposed by Richards and Cheyrezy (1995) composed of cement, silica fume, quartz sand, quartz powder, steel fibers, superplasticizer etc. Later, other ingredients such as fly ash, GGBS, metakaoline, copper slag, fine aggregate of different sizes have been added to original UHSC. In the present investigation, the combined effect of coarse aggregate (6mm - 10mm) and steel fibers (0.50%, 1.0% and 1.5%) has been studied on UHSC mixes to evaluate mechanical and fracture properties. Compressive strength, split tensile strength and modulus of elasticity were determined for the three UHSC mixes. Size dependent fracture energy was evaluated by using RILEM work of fracture and size independent fracture energy was evaluated by using (i) RILEM work of fracture with tail correction to load - deflection plot (ii) boundary effect method. The constitutive relationship between the residual stress carrying capacity (σ) and the corresponding crack opening (w) has been constructed in an inverse manner based on the concept of a non-linear hinge from the load-crack mouth opening plots of notched three-point bend beams. It was found that (i) the size independent fracture energy obtained by using above two approaches yielded similar value and (ii) tensile stress increases with the increase of % of fibers. These two fracture properties will be very much useful for the analysis of cracked concrete structural components.

• 한국농공학회지
• /
• 제37권5호
• /
• pp.90-100
• /
• 1995

This study was performed to develop the lightweight concrete using synthetic lightweight aggregate and natural coarse aggregate. Mixing ratios were three types, the first type was mixed cement and synthetic lightweight fine aggregate (Type CP), the second type was mixed cement, synthetic lightweight fine aggregate and synthetic lightweight coarse aggregate (Type CPE), the third type was mixed cement, synthetic lightweight fine aggregate and natural coarse aggregate (Type CPN). The results of this study are summarized as follows ; 1. The W/C of each mixing ratio was increased with increase of the amount of cement used, and it was shown higher in order of Type CP, CPN, CPE. 2. The unit weight of Type CP, CPE and CPN was 1.473~1.647g/cm$^3$, 1.467~1.622g/cm$^3$ and 1.658~1 .838g/cm$^3$, respectively. And the absorption ratio was approximately 20%, which was higher than that of the normal cement concrete. 3. The compressive strength of Type CP was shown 178 ~249kg/cm2, Type CPE was shown 149~241kg/cm$^2$ and Type CPN was shown 196~297kg/cm$^2$, respectively. Each strength ratio was smaller than that of the normal cement concrete. 4. The pulse velocity of Type CP, CPE and CPN was 2, 688~3, 240m/sec, 2, 981~3, 324m/sec and 2, 989 ~ 3, 545m/sec, respectively. And it was increased with increase of strength and unit weight. 5. The length change ratio at 28 days was in the range of 0.057~0.077%, and earlier length change ratio was higher than that of the later.

• 자원리싸이클링
• /
• 제18권3호
• /
• pp.20-26
• /
• 2009

본 연구는 순환잔골재를 사용한 콘크리트의 굳지 않은 콘크리트 특성을 파악하고 순환골재 콘크리트의 품질관리 방안을 제시하고자 하였다. 이를 위하여 순환굵은골재 및 순환잔골재의 치환율을 조합하여 설계압축강도 30MPa의 콘크리트를 제작하였으며, 공기량 및 슬럼프를 측정하였다. 측정된 공기량 및 슬럼프 경시변화를 통하여 순환잔골재의 재료적 특성이 콘크리트의 물성에 미치는 영향을 파악하였으며, 골재의 흡수율 차에 따른 품질성능 저하를 고려할 수 있도록 현장 도착 슬럼프를 기준으로 전체 배합수를 일정하게 유지하는 품질관리 방안을 제시하도록 하였다. 본 실험에서는 골재 종류(천연, 순환)에 따른 표면수 보정을 통해 1시간 후 현장도착 슬럼프가 일정하게 유지될 수 있도록 콘크리트를 배합하였다. 순환골재의 사용에 따른 압축강도의 저하는 나타나지 않았다. 또한 표면수 보정을 통한 전체 배합수의 관리를 통하여 순환골재 콘크리트의 품질관리가 가능할 것으로 판단된다.

• 콘크리트학회논문집
• /
• 제13권4호
• /
• pp.305-313
• /
• 2001

본 연구에서는 콘크리트 열전도율의 영향인자에 대하여 TLPP원리를 응용한 QTM-D3 장비를 이용하여 실험을 실시하였고, 이들 실험결과를 이용하여 콘크리트의 열전도율을 예측하는 모델식을 제안하였다. 본 연구를 통하여 얻은 결론은 다음과 같다. 콘크리트, 모르타르 및 페이스트의 열전도율에 미치는 주요 영향인자를 구명하기 위해 본 연구에서 선택된 실험변수는 재령, 골재 함유량, 시멘트 함유량, 결합재 종류, 잔골재율, 시편의 온도 및 함수상태로 총 7가지이다. 이중에서 골재 함유량과 함수상태가 콘크리트 열전도율의 주요 영향인자임을 알 수 있었다. 그리고 시멘트 사용량이 많은 페이스트나 모르타르의 경우 시멘트 함유량이나 결합재 종류에 의해서도 열전도율이 영향을 받고 있다. 그러나 재령은 콘크리트의 열전도율에 큰 영향을 미치지 않음을 알 수 있었다. 콘크리트 열전도율에 주요 영향인자인 골재 함유량, 잔골재율, 시편의 온도 및 함수상태를 이용하여 콘크리트의 열전도율을 계산할 수 있는 모델식을 제안하였다.

• 한국건축시공학회지
• /
• 제5권2호
• /
• pp.89-95
• /
• 2005

Various tests are performed with the recycled concrete including compressive strength, flexural strength, splitting tensile strength, bonding strength and chloride ion penetration test. The basic data obtained from the presented test could be accumulated for the purpose of utilization in concrete structure. Most of the strength tests show that strength decrease a little extent with increasing substitution ratio of recycled coarse aggregate except splitting tensile test for the concrete with $100\%$ recycled fine aggregate. But in case of the $50\%$ substitution of recycled coarse aggregate, compressive strength, flexural strength and bonding strength are almost equal to the normal concrete. Chloride ion penetration test shows that the penetration amounts of chloride ion becomes more in proportion to the substitution ratio of recycled aggregate. But most of the results show that the permeability of recycled concrete is proper to use. The results of present study nay imply that the use of recycled aggregate for steam curing concrete is possible but the substitution ratio of recycled aggregate should be determined through further studies.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 추계 학술논문 발표대회 논문집
• /
• pp.83-86
• /
• 2006

This study investigates engineering properties of concrete using recycled coarse aggregated manufactured by bar-crusher. Test showed that Bar-crusher(S) had more effective results at fresh state than cone-crusher(C) and impact-crusher(I). In case of specimens manufactured by S, increase of spindle velocity, incorporating ratio of recycled aggregate and maximum size of aggregate inclined fluidity. As for the hardened concrete, compressive strength of specimens by C or I exhibited lower value than that of S. In addition, specimens using recycled aggregate manufactured by 400rpm and 500rpm of spindle velocity showed less than 10% reduction rate of strength, which is not significant reducing value. It is found that 500rpm of the spindle velocity had the best strength performance, while 600rpm was the worst. Strength value of specimens decreased as incorporating ratio of recycled aggregate inclined, but the strength value of most specimens exhibited less than 10% of reducing rate, assuming favorable result, only at less than 25% incorporating ratio of recycled aggregate.

• Steel and Composite Structures
• /
• 제6권3호
• /
• pp.257-284
• /
• 2006

The behaviour of hollow structural steel (HSS) stub columns and beams filled with normal concrete and recycled aggregate concrete (RAC) under instantaneous loading was investigated experimentally. A total of 40 specimens, including 30 stub columns and 10 beams, were tested. The main parameters varied in the tests were: (1) recycled coarse aggregate (RCA) replacement ratio, from 0 to 50%, (2) sectional type, circular and square. The main objectives of these tests were threefold: first, to describe a series of tests on new composite columns; second, to analyze the influence of RCA replacement ratio on the compressive and flexural behaviour of recycled aggregate concrete filled steel tubes (RACFST), and finally, to compare the accuracy of the predicted ultimate strength, bending moment capacity and flexural stiffness of the composite specimens by using the recommendations of ACI318-99 (1999), AIJ (1997), AISC-LRFD (1999), BS5400 (1979), DBJ13-51-2003 (2003) and EC4 (1994).