• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.841-844
• /
• 2008

석탄화력발전소에서 발생되는 부산물인 석탄회중 비정제 플라이애시 및 바텀애시는 해안에 건설된 회처리장에 매립처분되고 있는 실정이다. 산업의 발전과 함께 전력소비량의 증대로 석탄회의 발생량은 점차 증대하고 있으며, 이로 인해 매립지의 부족과 신규건설에 따른 환경문제의 대두로 매립회의 활용필요성은 커지고 있는 상황이다. 본 연구에서는 발전소 매립지 매립회의 활용성을 증대시키기 위해 매립지 별 매립회의 기초물성을 비교분석하였다. 연구결과, 매립지 별로 매립회의 특성이 다르므로 용도별 특성을 구별하여 적용할 필요가 있는 것으로 나타났다. 특히, 콘크리트용 골재로서 적용할 경우 흡수율의 변동에 따른 품질의 특성이 매우 다르기 때문에 매립회에 대한 전체적인 비교검토가 필요한 것으로 나타났다. 염분함유량을 검토한 결과 2회이상의 세척과정을 통하면, 콘크리트용 골재로서의 적용이 가능한 것으로 나타났다.

• 환경영향평가
• /
• 제9권4호
• /
• pp.301-314
• /
• 2000

Marine surface sediments in the vicinity of Samcheonpo coal-fired power plant were analyzed by a total analysis($HF+HNO_3+HClO_4$) and sequential extraction procedure for heavy metals in order to investigate the total concentrations and geochemical phases of heavy metals. The result showed that the concentrations of Cr, Cu, Fe and Zn were within ranges typical for coastal areas, which reflected the mineralogical composition of the sediments in the studied area. However, the distributions of Cd, Co, Mn, Ni and Pb were rather different from the former, indicating that these heavy metals had a different origin, or that they were affected by a different geochemical mechanism. Chemical partitioning of heavy metals using sequential extraction procedure revealed that Cu, Fe, Pb, Zn were significantly bound to the residual phases of the sediments, whereas carbonate phases contained considerable amounts of Mn. The significant association of Pb with the exchangeable fraction also indicated that Pb was more mobile and bioavailable than Cu, Fe, Mn, Zn.

• 환경영향평가
• /
• 제10권2호
• /
• pp.85-98
• /
• 2001

This study was conducted to investigate the geochemical factors governing the distribution of heavy metals(Co, Cr, Cu, Fe, Mn, Ni, Pb, and Zn) in the marine surface sediment samples collected from the Samcheonpo coal-fired power plant. Variations of absolute metal concentrations were related to those in textural and/or carbonate and organic matter content. Most elements, except for Pb, showed generally lower contents compared with the average shale concentration, and the effect of anthropogenic input appeared to be minimal in the sediments. Computations of LF%(labile fraction) and EF(enrichment factor) based on all trace metal data indicated the presence of mineralogical control for Co, Cr, Cu, Ni, and Zn, and anthropogenic contamination for Pb, which needs to be considered in the design of long term monitoring programmes.

• 플랜트 저널
• /
• 제13권1호
• /
• pp.30-36
• /
• 2017

본 연구에서는 500 MW급 석탄화력발전소 기동 중 고압 및 중압 증기터빈축 양단 베어링에서 발생한 이상진동 현상의 원인을 규명하고 해결방안을 모색하기 위하여 알려진 이론에 근거하여 분석을 수행하였다. 주파수, 진폭 및 위상각 분석결과 접촉에 의해 발생하는 진동의 전형적인 특성이 나타나 이상진동의 원인을 접촉으로 판단하였고 증기터빈을 분해하여 내부부품의 마모를 확인하였다. 이상진동을 해소하기 위하여 저속회전 및 발란싱 방법을 적용하였는데 발란싱이 저속회전보다 접촉현상 해소에 우수하였다. 따라서 본 연구와 유사한 특성의 이상진동이 증기터빈 축에서 발생할 경우 발란싱은 유력한 해결방안이 될 수 있을 것이다.

• 대한기계학회논문집B
• /
• 제24권4호
• /
• pp.526-532
• /
• 2000

Recent studies have been directed toward obtaining a better understanding of the application of electrostatic precipitators to collect fly ash particles produced in a coal-fired power plant. Electrical resistivity can be described as the resistance of the collected dust layer to the flow of electrical current and is an important property for the collection efficiency in the electrostatic precipitator. In this paper, fly ash resistivity as a function of temperature up to $450^{\circ}C$ has been experimentally investigated using the resistivity meter consisted of the movable electrode, dust cup, and furnace. Resistivity was found to increase with increased temperature up to $200^{\circ}C$ due to the reduction of water concentration and then gradually decrease with increased temperature due to the activation of electrons. As the resistivity of fly ash in the flue gas temperature of $150^{\circ}C$ was measured >$10^{10}$ ohm cm, the efficiency of fly ash removal in the electrostatic precipitator might be expected to be low due to back-corona phenomenon. Flue gas conditioning in the electrostatic precipitator to reduce the resistivity of fly ash as required.

• 플랜트 저널
• /
• 제8권4호
• /
• pp.34-39
• /
• 2012

석탄화력발전소에서 저품위탄 연소시 통풍저항 변화로 인해 승압송풍기의 운전점에 영향을 주는 것을 분석하여 현재운전점 대비 실속시점을 예측하였다. 연료의 발열량이 낮을수록 통풍저항 증가 속도가 빨라지며, 통풍저항과 승압송풍기의 운전점과는 강한 상관관계가 있음을 확인하였다. 발열량이 낮을수록 통풍저항이 빨리 상승하며 이는 곧 승압송풍기의 운전점이 설계탄 대비해서 실속 한계운전점에 빨리 도달하게 된다. 이를 근거로 현재운전점 대비 한계운전점까지의 운전여유분과 발열량별 통풍저항 증가 속도를 계산하여 실속시점을 예측할 수 있어 송풍기 실속으로 인한 발전출력의 감소나 운전정지에 대비한 정비계획 수립 등 안정운전에 많은 도움이 될 것으로 예상한다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1998년도 유체기계 연구개발 발표회 논문집
• /
• pp.209-214
• /
• 1998

A thermodynamic simulation method is developed for the process design and the performance evaluation of the gas turbine in IGCC power plant. The present study adopts four clean coal gases derived from four different coal gasification and gas clean-up processes as IGCC gas turbine fuel, and considers the integration design condition of the gas turbine with ASU(Air Separation Unit). In addition, the present simulation method includes compressor performance map and expander choking models for considering the off-design effects due to coal gas firing and ASU integration. The present prediction results show that the efficiency and the net power of the IGCC gas turbines are seperior to those of the natural gas fired one but they are decreased with the air extraction from gas turbine to ASU. The operation point of the IGCC gas turbine compressor is shifted to the higher pressure ratio condition far from the design point by reducing the air extraction ratio. The exhaust gas of the IGCC gas turbine has more abundant wast heat for the heat recovery steam generator than that of the natural gas fired gas turbine.

• 한국연소학회지
• /
• 제16권2호
• /
• pp.1-8
• /
• 2011

As one of the main technologies for carbon capture and storage in power generation, oxy-coal combustion is being developed for field demonstration in Korea. This study presents the results of numerical simulation for combustion in a single-wall-fired 100 $MW_e$-scale boiler proposed for the initial design of the demonstration plant. Using a commercial CFD code, the detailed combustion, flow and heat transfer characteristics were assessed both for air-mode and oxy-mode combustion. The results show that stable combustion can be achieved in the dual mode operation with the current boiler configuration. However, the differences in the flow pattern and heat transfer between the two combustion modes need to be considered in the design and operation which is mainly due to the larger density and specific heat of $CO_2$ compared to $N_2$. Further development of the boiler design is required using improved numerical modeling for radiative heat transfer and combustion.

• 에너지공학
• /
• 제26권4호
• /
• pp.74-83
• /
• 2017

Coal-fired power plants supply roughly 50 percent of the nation's electricity but produce a disproportionate share of electric utility-related air pollution. Coal combustion technology can facilitate volume reduction of up to 90%, with the inorganic contaminants being captured in furnace bottom ash and fly ash residues. These disposal coal ash residues are however governed by the potential release of constituent contaminants into the environment. Accelerated carbonation process has been shown to have a potential for improving the chemical stability and leaching behavior of bottom ash residues. The aim of this work was to quantify the volume of $CO_2$ that could be sequestrated with a view to reducing greenhouse gas emissions and stabilize the contaminated heavy metals from bottom ash samples. In this study, we used PC boiler bottom ash, Kanvera reactor (KR) slag and calcined waste lime for measuring chemical analysis and heavy metals leaching tests were performed and also the formation of calcite resulting from accelerated carbonation process was investigated by thermo gravimetric and differential thermal analysis (TG/DTA).

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권7호
• /
• pp.32-40
• /
• 2013

This study was objected to evaluate the potential impact on the groundwater environment of the coal bottom ash used as fill materials on the land surface. From four coal-fired power plants, bottom-ashes were collected and analyzed through sequential extraction and column leaching tests following the meteoric water mobility procedure. The column tests shown leaching heavy metals including Pb, As, B, Cu, Zn, Mn, Ni, Ba, Sr, Sb, V, Cr, Mo, and Hg. The relatively high concentrations of B, Sr, Ba, and V in leachate were attributed to both the higher concentrations in the bottom ash and the relatively higher portion of leachable state, sorbed state, of metals. Bottom-ash samples from the D-plant only show high leaching potential of sulfate ($SO_4$), probably originated from the coal-combustion process, called the Fluidized Bed Combustion. Consequently, to manage recycling bottom ashes as fill materials, an evaluation system should be implemented to test the leaching potentials of metals from the ashes considering the absolute amount of metals and their state of existence in ashes, and the coal-combustion process.