• 플랜트 저널
• /
• 제14권3호
• /
• pp.35-41
• /
• 2018

최근 북한에 대한 정부정책 기조와 북한의 전력설비 상황을 고려할 때 북한 무연탄을 우리나라 석탄화력발전소에서 소비할 수 있도록 그에 대한 대비가 필요할 것이다. 본 연구에서는 500 MW 석탄화력발전소에서 보일러 내 무연탄 주입위치, 미분도 및 연소용 공기유량 등 주요 운전조건을 변화시키면서 미연탄소 발생에 미치는 영향을 파악하기 위한 무연탄 혼소시험을 실시하였다. 주연소영역 체류시간이 상대적으로 긴 보일러 하부로 무연탄을 주입할 때 미연탄소 발생이 현저히 감소하고, 연소반응 표면적과 비례하는 미분도를 증가시켜도 미연탄소 발생이 감소하는 것을 확인하였다. 연소반응성을 증가시키는 공기유량의 증가도 미연탄소 저감에 기여한다. 주어진 혼소율에 대하여 상기의 운전조건 조절을 통하여 미연탄소 발생을 석탄회 재활용 품질기준인 5 % 이하로 유지하는 것이 가능하며, 시험범위 내에서 운전조건 변경의 우선 순위는 무연탄 주입위치가 가장 높다.

• 에너지공학
• /
• 제21권1호
• /
• pp.68-74
• /
• 2012

국내 석탄화력발전소의 아역청탄과 역청탄의 혼소는 일반화되어 있으며 아역청탄의 비율이 무게 기준으로 50%가 넘는 경우도 있다. 저급탄인 아역청탄의 혼소 비율이 높아짐에 따라 연소 부산물인 비회에서 미연물질이 다량 발생하고 있으며 이는 콘크리트 혼화제로서의 비회 재활용을 가로막는 중요한 인자로 작용하고 있다. 본 연구에서는 아역청탄 혼소율이 높은 국내 500MW 표준 석탄화력발전소에서 미연물질이 포함된 비회를 입수하여 이에 대한 분석을 수행하였다. 이러한 미연물질은 석탄의 열분해 생성물인 검댕(soot)인 것으로 나타났으며 실제 석탄화력발전소에서 사용하고 있는 석탄과 혼탄의 성상 데이터와 CPD모델을 사용하여 혼탄별 검댕(soot)의 발생가능성을 분석하였다.

• 한국환경보건학회지
• /
• 제36권2호
• /
• pp.128-135
• /
• 2010

The main purpose of this study was to develop the greenhouse gas emission factor for power plant using sub-bituminous coal. In Korea, Fired power plant are a major source of greenhouse gases within the fossil fuel combustion sectors, thus the development of emission factors is necessary to understand the characteristics of the national specific greenhouse gas emission and to develop nation specific emission factors. These emission factors were derived from the $CO_2$ concentrations measurement from stack and fuel analysis of sub-bituminous coal. Caloric value of sub-bituminous coal used in the power plants were 5,264 (as received basis), 5,936 (air-dried basis) and 6,575 kcal/kg (dry basis). The C emission factors by fuel analysis and $CO_2$ concentration measurement was estimated to be 26.7(${\pm}0.9$), 26.3(${\pm}2.8$)tC/MJ, respectively. Our estimates of C emission factors were comparable with IPCC default value.

• 플랜트 저널
• /
• 제10권3호
• /
• pp.34-38
• /
• 2014

국내외의 석탄발전기는 주로 기동용 연료로 유류를 사용하고 있으나, 최근 저렴한 석탄을 플라즈마 장치를 이용하여 연소시키는 플라즈마 버너가 도입되어 기동비용을 절감하고 있다. 하지만 플라즈마 버너 초기 운전 시 미연탄소분 증가가 여전히 현안사항으로 남아있으며 기동 시 플라즈마 버너 연소 시의 미연탄소분 저감을 위한 연구와 운전기준 정립이 되어있지 않은 실정이다. 따라서 본 연구에서는 플라즈마 버너의 아크전류에 따른 미연탄소분 영향을 분석함으로써 운전기준을 제시하고자 한다. 또한 석탄발전기 시운전 시 플라즈마 버너의 경제성을 실증함으로써 국내 플랜트 산업에 기여하고자 한다.

• 환경영향평가
• /
• 제16권4호
• /
• pp.277-283
• /
• 2007

Since the Kyoto Protocol became into effect, Korea has been expected to be part of the Annex I countries performing the duty of GHG reduction in the phase of post-Kyoto. Therefore, it is necessary to develop emission factors appropriate to Korean circumstances. In order to develop emission factors this study utilized the CleanSYS, which is the real-time monitoring system for industrial smoke stacks to calculate the emission rate of $CO_2$ continuously. In this study, the main focus was on the power generation plants emitting the largest amount of $CO_2$ among the sectors of fossil fuel combustion. Also, an examination on the comparison of $CO_2$ emission was made among 3 generation plants using the different types of fuels such as bituminous coal and LNG; one for coal and others for LNG. The $CO_2$ concentration of the coal fired plant showed Ave. 13.85 %(10,384 ton/day). The LNG fired plants showed 3.16 %(1,031 ton/day) and 3.19 %(1,209 ton/day), respectably. Consequently, by calculating the emission factors using the above results, it was found that the bituminous coal fired power plant had the $CO_2$ emission factor average of 88,726 kg/TJ, and the LNG fired power plants had the $CO_2$ average emission factors of 56,971 kg/TJ and 55,012 kg/TJ respectably which were similar to the IPCC emission factor.

• 한국콘텐츠학회논문지
• /
• 제21권3호
• /
• pp.567-575
• /
• 2021

석탄화력발전소, 제철소 등 대규모 배출시설이 밀집되어 있는 충청남도 당진시는 지자체 차원에서 대기질 개선과 온실가스 감축 등을 위해 적극 노력하고 있음에도 불구하고 시민들의 건강에 대한 우려가 높다. 이에 본 연구에서는 석탄화력발전소와 외부요인 등이 지역 대기오염에 미치는 영향 파악을 위해 일반적으로 미세먼지 또는 초미세먼지 등의 기원 추적자로 이용하는 탄소 안정동위원소를 활용하여 지역 오염원의 기원을 추정하였다. 또한, 석탄화력발전소로부터의 이격거리를 고려하여 선정한 2지점에 대한 계절별 실측데이터와 선행연구 분석을 통해 구축한 라이브러리 및 역궤적 분석으로 오염원의 기원을 해석하였다. 탄소 안정동위원소비의 분석결과 겨울 > 봄 > 가을 > 여름 순으로 고농도 경향성을 보였으며, 라이브러리와의 매칭결과 이동오염원과 노천소각의 영향이 상대적으로 높은 것으로 분석되었다. 본 연구는 시범연구로 지속적인 모니터링과 데이터 축적을 통한 연구결과의 신뢰성 확보에 주력해야 할 것으로 판단된다.

• 한국입자에어로졸학회지
• /
• 제16권4호
• /
• pp.131-140
• /
• 2020

Air pollutants emitted from chimneys of coal-fired power plants are considered to be a major source of fine particulate matter in the atmosphere. In order to manage fine particle in the chimney of a coal-fired power plant, it is necessary to know the concentration of fine particle emitted in real time, but the current system is difficult. In this study, a real-time measurement system for chimney fine particle was developed, and measurements were performed on six coal-fired power plants. Through the measurements, the mass concentration distribution according to the particle size could be secured. All six chimneys showed bimodal distribution, and the count median diameters of each mode were 0.5 and 1.1 ㎛. In addition, it was compared with the gravimetric measurement method, and it was determined that the relative accuracy for PM10 was within 20%, and the value measured using the developed measuring instrument was reliable. Finally, three power plants were continuously measured for one month, and as a result of comparing the concentration of PM10 according to the amount of power generation, it was confirmed that the PM10 discharged from the chimney increased in the form of an exponential function according to the amount of power generation.

• 한국연소학회지
• /
• 제15권2호
• /
• pp.1-11
• /
• 2010

Power generation systems based on the oxy-coal combustion with carbon dioxide capture and storage (CCS) capability are being proposed and discussed lately. Although a large number of lab scale studies for oxy-coal power plant have been made, studies of pilot scale or commercial scale power plant are not enough. Only a few demonstration projects for oxy-coal power plant are publicized recently. The proposed systems are evolving and various alternatives are to be comparatively evaluated. This paper presents a proposed approach for performance evaluation of a commercial 100 MWe class power plant, which is currently being considered for 'retrofitting' for the demonstration of the concept. The system is configurated based on design and operating conditions with proper assumptions. System components to be included in the discussion are listed. Evaluation criteria in terms of performance are summarized based on the system heat and mass balance and simple performance parameters, such as the fuel to power efficiency and brief introduction of the second law analysis. Also, gas composition is identified for additional analysis to impurities in the system including the purity of oxygen and unwanted gaseous components of nitrogen, argon and oxygen in air separation unit and $CO_2$ processing unit.

• 설비공학논문집
• /
• 제21권3호
• /
• pp.157-166
• /
• 2009

The pulverized coal combustion behavior in the coal fired utility boiler has been investigated with the CFD and process analysis techniques. The used commercial software were CFX and PROATES, and these were coupled each other to get more reliable boundary condition set-up, resulting in more reliable solution. For two cases which were the actual operation condition of A power plant, the calculated values from the coupled CFD and process analysis for thermal energy system were compared with the plant data, and the good agreements were obtained for Case 1 and 2. The calculated temperature distributions on the surface of heat exchangers were compared with the plant data for the steam temperatures across heat exchangers, and these explained the actual operating situation very well. The temperature deviation across the final superheater tube, which was believed to be the main cause of the frequent tube failure, were also explained very well with the calculated distributions of gas temperature and radiation on the plane of the final superheater.

• 전기학회논문지
• /
• 제59권9호
• /
• pp.1663-1672
• /
• 2010

The boiler feed-water pump controllers which can be applied to 500MW class coal fired power plants was developed. The validity of the developed controllers was shown via the applied test result in a power plant. It is expected that the developed controllers are used to retrofit the existing controllers that have surpassed their expected service life and have limited spare parts, and contributes to the stable operation of plants. Based on the collected data and analysis, new control schemes were developed and implemented during the overhaul period in the new control systems. During normal operation, feed water could be supplied to the boiler with the capability of the 1600t/h flow without any problems in automatic mode of controllers. In this study, the feed-water pump controllers were developed successfully. In addition, it is expected that the developed controllers can make the plant operation more stable and can be applied to a lot of power plants.