• Journal of the Korean GEO-environmental Society
• /
• v.11 no.6
• /
• pp.77-83
• /
• 2010

In this study, we tried to determine any detrimental effects on water quality when bottom ash obtained from a coal-fired power plant intended to be used as a fill material in construction sites. Physical-chemical properties of bottom ash were determined using proximate analysis, elemental analysis, XRD, and XRF. Classification of bottom ash as a waste material and soil contamination due to the use of bottom ash were performed by Korea waste standard leaching test and soil toxicity test, respectively. Results of leaching tests were compared to the regulations for water quality and groundwater quality and no harmful effects on water quality were found. Most of heavy metals in leachate were below detection limits but trace amount of $Cr^{6+}$ was found. However, concentration of $Cr^{6+}$ was below the regulation criteria. Column leaching tests indicated that concentrations of Pb and Zn were slightly higher than regulations but below regulations within 1 PVE, but concentrations of sulfate were 10 times higher than regulation and thus, the required time to reach regulation was almost 8 PVE.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.2
• /
• pp.151-157
• /
• 1998

Fly ash application with a rate of 0, 50, 100, $150Mg\;ha^{-1}$ in clay loam paddy, which had properties of pH 5.3 and low contents of silicate and boron, gave a strongly positive effects on the growth and yields of malting barley showing better responses in bituminous coal fly ash(BCFA) than anthracite fly ash(AFA). Especially, soil chemical characteristics improved greatly by fly ash were pH, available phosphate, exchangeable calcium, available silicate, and boron. Shoot length and the number of tiller till defrosting season appeared the most positive responses by application of BCFA $50Mg\;ha^{-1}$ and AFA $100Mg\;ha^{-1}$. However, the number of spikelet per panicle at heading stage was proportionally increased to the rates of each fly ash. As a result, the grain yields of malting barley were increased to $13.8(4.221Mg\;ha^{-1}){\sim}37.7%(5.106Mg\;ha^{-1})$ by application of BCFA and to $1.1(3.75Mg\;ha^{-1})-20.6%(4.473Mg\;ha^{-1})$ by application of AFA. Protein contents in the grain was the highest in $150Mg\;ha^{-1}$ plot, showing 10.5 and 10.8% by BCFA and AFA application, which were suitable for malting. At harvesting, plants showed 49 and 58% of lodging indices by application of BCFA 100 and $150Mg\;ha^{-1}$, respectively, which were equivalent to two fold values of those by AFA.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.4
• /
• pp.165-171
• /
• 1999

A study on the synthesis of zeolite 4A using the bituminous coal fly ash from power plant was carried out. This study aims to investigate possibility for detergent builder with synthesized zeolite. It was examined at the crystallization conditions of atmospheric pressure and that of pressurization. The synthesized zeolite was proved to be Zeolite 4A type by means of the XRD and SEM analysis, and then the synthesized zeolite was used as an absorbent the remove the $Ca^{2+}$ ions in the water. In this study, commercial zeolite and synthesized zeolite reached equilibrium within 10 and 30 minutes respectively. The amount of $Ca^{2+}$ ions exchanged by the commercial zeolite, atmospheric pressure zeolite (zeolite A) and pressurized zeolite(zeolite PA) were 391mg/L(as $CaCO_3$), 323mg/L(as $CaCO_3$) and 355mg/L(as $CaCO_3$) respectively.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.359-362
• /
• 2000

From a practical perspective, sustainable development requires the optimization of current natural resources and the minimization of derived wastes. A major concern with respect to sustainable infrastructure development is the continued depletion of easily-available natural resources and environmental matters are more serious, the concerned about waste materials which are inevitably produced in the manufacturing of the product is getting worse. These wastes must be handled and properly disposed, and many times, although this waste may be environmentally inert, it has been discarded in landfills. But current disposal methods of these by-products create not only a loss of profit for the power industry, but also environmental concerns the breed negative public opinion. therefore, this study evaluates the ECO artificial aggregate and bricks were designed and tested for the end use of fly ash.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.381-382
• /
• 2009

This research presents early characters of waste recycling shotcerete with a combination of Coal-Ash are used by Bo-Ryung thermoelectric power plant. Several tests were conducted in this research.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.159-162
• /
• 2000

The purpose of this study is to develope an accurate procedure for measuring the glass content of fly ash produced by bituminous coal to assist in predicting their behavior in concrete. Quantitative mineralogical compositions of fly ashes were obtained by internal standard method using powder X-ray diffraction analysis. In the X-ray diffraction method, the specimen and standard fluorite were cautiously mixed and pulverized to 22$\mu$m in wet process so as to avoid the prefered orientation of the crystal and microabsorption effect of X-ray. calibration curve were fitted for several references peaks of four phases:$\alpha$-quartz. mullite, magnetite, hematite. The amount of glass was calculated by subtracting the amount of crystal phase and loss on ignition from the total amount. Glass content determined with this method ranged from 66.7 to 75.wt%.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.455-458
• /
• 2003

We investigated the leaching of elements from anthracite ashes by interactions with seawater. The results show that consumption rates of dissolved oxygen are 7.5 times greater in the seawater system than in the fresh water system and indicate that the differences in DO consumption rate may plat a role in regulating the element leaching from the coal ashes. It is revealed that seawater's pH buffering capacity is the most important factor that makes the leaching of elements and their chemical behaviors in the seawater system different from those in the fresh water environments. In overall, element leaching from the weathered ash is smaller than that from the fresh ash. However, the leaching of Si, Fe, Al, Mn, phosphate, and some other elements were independent of weathering. They were dependant only on the pH of the solutions.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.4
• /
• pp.267-274
• /
• 2018

Though the wet bottom ash has been used as a type of lightweight aggregate, dry bottom ash, new type bottom ash from coal combustion power plant, has scarcely researched. It is excellent lightweight aggregate in the view point of construction material. This study is performed to check the applicability of dry bottom ash as a fine aggregate in lightweight aggregate concrete, by analyzing various properties of fresh and hardened concrete. We get results that the slump of concrete is within the target range at less than 75% replacement rate of dry bottom ash, the air content is not affected by the replacement rate of dry bottom ash, the bleeding capacity is less than $0.025cm^3/cm^2$ at 75% under of the replacement rate of dry bottom ash, and the compressive strength of concrete show 90% or more comparing the base mix while initial strength development is a little low. Oven dry unit weight of concrete is reduced by 8.9% when replaced 100% dry bottom ash, and dry shrinkage tends to decrease depending on increase of replacement rate of dry bottom ash. Modulus of elasticity of concrete shows no decease at 50% over of the replacement rate of dry bottom ash, while modulus of elasticity of concrete decreases when the replacement rate increases further. The dry bottom ash, when used as a fine aggregate in lightweight concrete, can be used effectively without any deterioration in quality.

• Korean Chemical Engineering Research
• /
• v.46 no.2
• /
• pp.423-429
• /
• 2008

Currently, Ash-free clean coal producing process by solvent extraction is under development. The produced ash-free clean coal can be directly combusted in a gas turbine which results in substantial improvement of power generation efficiency. However, the clean coal produced by the solvent extraction still contain trace amount of alkali metal which may cause corrosion on turbine blades during the direct combustion. In present work ${\alpha},{\beta}$-metal (Zr and Ti) phosphates and H-Y zeolite were synthesized and their ion exchange characterizations were investigated for the application on alkali metal removal for clean coal production. $Na^+$ ion removal capacities of the metal phosphates and H-Y zeolite were measured and compared in both aqueous solution (100 ppmw, $Na^+$) and coal dissolved N-methyl-2-pyrrolidone (NMP, 12 ppmw $Na^+$) at elevated temperature. In aqueous solution, the ${\beta}$ form metal phosphates showed very high ion exchange capacities compared to ${\alpha}$ form. ${\beta}$ form metal phosphates also showed higher $Na^+$ removal capacities than H-Y zeolite. In ion exchange medium of NMP, all the ${\alpha}$ form metal phosphates showed over 90% of $Na^+$ ion removal efficiency in the temperature range of 200 to 400 while that of H-Y zeolite decreased as a half when the temperature was over 350. In addition, the regenerated metal phosphates by acid treatment showed no sign of degradation in $Na^+$ removal efficiency. Among the metal phosphates used, $Zr_{0.75}Ti_{0.25}(HPO_4)_2$ showed the best performance in $Na^+$ removal and is expected to be the most suitable inorganic ion exchanger for the alkali metal removal process.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1998.05a
• /
• pp.49-56
• /
• 1998

최근 국내의 에너지 수요는 특히 전기에너지 분야에서 급격한 증가추세를 보여왔으며 그 결과 전력생산을 위한 화석연료 중 특히 석탄의 사용량은 해가 갈수록 증가하였으며 이에 따라 다량의 대기오염물질과 온실가스 등이 발생하고 있어서 미래의 석탄 연소시스템들은 높은 열효율과 최소의 대기오염물질 배출을 필요로 하고 있다. (중략)