Fig. 1. Shape of using lightweight aggregate
Fig. 2. Grading of fine aggregate
Fig. 3. Slump of fresh concrete
Fig. 4. Air content of fresh concrete
Fig. 5. Bleeding of fresh concrete
Fig. 6. Compressive strength of concrete
Fig. 7. Rate of strength development depending on age
Fig. 8. Unit weight of concrete
Fig. 9. Moisture content of concrete
Fig. 10. Dry shrinkage of concrete
Fig. 11. Stress-strain curve of concrete
Fig. 12. Relation on modulus of elasticity and pore of using aggregate in concrete
Table 1. Mixing design
Table 2. Physical properties of using aggregate
References
- Han, C.G., Hwang, Y.S. (2003). Influence of mixing and construction factor on the bleeding of concrete, Journal of the Architectural Institute of Korea, 19(2), 107-114 [in Korean].
- Han, J.H., Kim, T.S., Kim, H.J., Oh, C.H.(1993). An experimental study on the strength properties of the high-strength lightweight concrete with admixture, Journal of the Architectural Institute of Korea, 9(9), 213-221 [in Korean].
- Jeon, H.K., Hong, S.J., Seo, C.H. (2001). A study of the characteristics of the high-flowable lightweight aggregate concrete, Journal of the Architectural Institute of Korea, 17(4), 71-78 [in Korean].
- Kim, Y.J., Choi, Y.W. (2010). The quality properties of self consolidating concrete using lightweight aggregate, Journal of the Korean Society of Civil Engineers, 30(6), 573-580 [in Korean].
- Kim, H.K. (2015). Properties of normal-strength mortar containing coarsely-crushed bottom ash considering standard particle size distribution of fine aggregate, Journal of the Korea Concrete Institute, 27(5), 531-539 [in Korean]. https://doi.org/10.4334/JKCI.2015.27.5.531
- Lee, C.S., Park, J.H., Jung, B.j., Choi Y.J. (2009). Relation between shrinkage and humidity on lightweight concrete and normal concrete by water-cement ratio, Journal of the Korean Society of Civil Engineers, 29(4), 385-393 [in Korean].
- Ministry of Trade, Industry and Energy, (2015). Seventh Electricity Supply Plan.
- Meng, J.H., Kim, T.Y., Cho, H.N., Kim, E.Y. (2015). Minimizing Environmental Impact of Ash Treatment in Thermal Power Plants (II), Korea Environment Institute.
- Park, S.H., Lee, J.B., Kim, S.S. (2016). The durability of the concrete using bottom ash as fine aggregate, Journal of the Korean Recycled Construction Resources Institute, 4(4), 349-355 [in Korean]. https://doi.org/10.14190/JRCR.2016.4.4.349
- Pfeifer, D.W., Hanson, J.A. (1967). Sand replacement in structural lightweight concrete sintering grate aggregates, ACI Journal, 121-127.
- Rossignolo, J.A., Agnesini, M.V.C., Morais, J.A. (2003). Properties of high-performance LWAC for precast structures with brazilian lightweight aggregate, Cement and Concrete Composites, Elsevier, 25(1), 77-82. https://doi.org/10.1016/S0958-9465(01)00046-4
- Ryu, T.D., Lee, S.W., Suh, C.H. (1993). Properties of strength of artificial light weight aggregate concrete with admixture, Journal of the Architectural Institute of Korea, 9(6), 177-185 [in Korean].
- Sim, J.I., Yang K. (2010). Air content, workability and bleeding characteristics of fresh lightweight aggregate concrete, Journal of the Korea Concrete Institute, 22(4), 559-566, [in Korean]. https://doi.org/10.4334/JKCI.2010.22.4.559
- Slate, F.O., Nilson, A.H., Martinez, S. (1986). Mechanical properties of high-strength lightweight concrete, ACI Journal, 83(4), 606-613.
- Sun, J.S., Sung, J.H., Kim, J.M. (2016). Evaluation on the applicability of dry processed bottom ash as lightweight aggregate for construction fields, Journal of Material Cycles and Waste Management, 18(4), 752-762. https://doi.org/10.1007/s10163-015-0367-x
- Videla, C., Lopez, M. (1997). Mixture proportioning methodology for structural sand-lightweight concrete, ACI Materials Journal, 83(3), 281-289.
- Wang. H.Y., Chen, B.T., Wu, Y.W. (2013). A study of the fresh properties of controlled low-strength rubber lightweight aggregate concrete (CLSRLC), Construction and Building Materials, 41, 526-531. https://doi.org/10.1016/j.conbuildmat.2012.11.113
- Yasar, E., Atis, C.D., Kilic, A., Gulsen, H. (2003). Strength properties of lightweight concrete made with basaltic pumice and fly-ash, Materials Letters, Elsevier, 57(15), 2267-2270. https://doi.org/10.1016/S0167-577X(03)00146-0
- Zhang, M.H., Gjorv, O.E. (1991). Mechanical properties of high-strength lightweight concrete, ACI Materials Journal, 88(3), 240-247.