• 제목/요약/키워드: Coagulant Dispersion

검색결과 18건 처리시간 0.032초

In Line Orifice Mixer에서의 응집제 확산분포 특성 (Characteristics of coagulants dispersion within In-Line Orifice Mixer)

  • 임경호;박영오;박대진;박노석;고태곤
    • 상하수도학회지
    • /
    • 제22권6호
    • /
    • pp.689-696
    • /
    • 2008
  • In a water treatment process a complete and homogeneous dispersion of the coagulants in the raw water could be most important factor. This research was performed to evaluate coagulation performance of the in-line-orifice mixer which was recently introduced as a rapid mixing device. The test was to determine the actual coagulant dispersion distribution on the overall cross-section at a distance of 1.6~3D from the chemical injection point by measuring zeta potential. From the results of zeta potential test, it was shown that the coagulant dispersion within the in-line orifice mixer was occurred very unevenly. The results have confirmed that it is necessary to increase the velocity of coagulants injection or pressurized water rates, in order to reduce nonuniform distribution of chemicals.

이중응집이 응집공정에 미치는 영향 (Effects of Dual-Coagulant Performance)

  • 김희근;문병현;김승현
    • 상하수도학회지
    • /
    • 제19권1호
    • /
    • pp.92-97
    • /
    • 2005
  • This research is to investigate the effect of the dual coagulant using inorganic coagulants($AICl3{\cdot}6H2O$) and polymer on the coagulant process. Jar-test was conducted by using Kaolin injected raw water. PDA(Photometric Dispersion Analyzer) equipment in order to analyze the size of the particles and the characteristics of the shapes. The change in the rate of sample ores' residual deposited after coagulants were also compared. According to the result derived from this experiment, the concentration of inorganic coagulant reduced 50% and the residual was lower by using dual coagulants compared to using single coagulant. However the dual coagulant required sufficient mixing time, and affected particle characteristics, with the effect of the injection order of coagulants, the simultaneous injection of inorganic coagulant and polymer showed the most effective in the particle removal.

정수장 응집제주입 최적화를 위한 플럭 모니터링 (Optimum Coagulation of Water Treatment Plant using On-line Floc Monitoring System)

  • 황환도;임상호;성규종;한영진;김영범;곽종운
    • 상하수도학회지
    • /
    • 제23권4호
    • /
    • pp.397-406
    • /
    • 2009
  • This study was conducted to monitor the floc sizes forming in the mixing zone in the water treatment plant. The dosing amount of poly aluminium chloride(PAC) was determined by particle dispersion analyzer(iPDA) in the lab and field scale test. During a field test period, PAC coagulant was used and the raw water was taken from Nakdong river. PAC wad diluted to activate the coagulant, leading to bring the more homogeneous dispersion in the shorter time. To monitor the floc sizes, the unit of floc size index(FSI) was used. With increasing of raw water turbidity, FSI value was increased. Also, the increased dosing amount of PAC brought the increased FSI and with overdosing of coagulant was in turn decreased. When the PAC was fed into the raw water after dilution in a field scale test, the width of FSI was narrower compared with the feeding of the mother liquor of PAC, implying that the formed flocs are denser and more uniform sizes. The width of FSI in average was varied on depending on the basicity of coagulant. Also, dF value, fractal dimension was evalued with the different coagulants, showing from 2.01 to 2.03. On-line floc monitor was effective for the optimal dosing in the drinking water plant.

On-line 모니터링 기법을 이용한 Al염계와 Fe염계 응집제의 응집특성 평가 (Evaluation of Coagulation Characteristics of Fe(III) and Al(III) Coagulant using On-line Monitoring Technique)

  • 손희종;염훈식;김상구;서창동;황영도
    • 한국환경과학회지
    • /
    • 제23권4호
    • /
    • pp.715-722
    • /
    • 2014
  • Effects of coagulation types on flocculation were investigated by using a photometric dispersion analyzer (PDA) as an on-line monitoring technique in this study. Nakdong River water were used and alum and ferric chloride were used as coagulants. The aim of this study is to compare the coagulation characteristics of alum and ferric chloride by a photometric dispersion analyzer (PDA). Floc growing rates ($R_v$) in three different water temperatures ($4^{\circ}C$, $16^{\circ}C$ and $30^{\circ}C$) and coagulants doses (0.15 mM, 0.20 mM and 0.25 mM as Al, Fe) were measured. The floc growing rate ($R_v$) by alum was 1.8~2.8 times higher than that of ferric chloride during rapid mixing period, however, for 0.15 mM~0.25 mM coagulant doses the floc growing rate ($R_v$) by ferric chloride was 1.1~2.3 times higher than that of alum in the slow mixing period at $16^{\circ}C$ water temperature. Reasonable coagulant doses of alum and ferric chloride for turbidity removal were 0.1 mM (as Al) and 0.2 mM (as Fe), respectively, and the removal efficiency of those coagulant doses showed 94% for alum and 97% for ferric chloride. The appropriate coagulant dose of alum and ferric chloride for removing dissolved organic carbon (DOC) showed about 0.3 mM (as Al, Fe) and at this dosage, DOC removal efficiencies were 36% and 44%, and ferric chloride was superior to the alum for removal of the DOC in water.

Effect of Coagulant Type on the Silica Dispersion and Properties of Functionalized RAFT ESBR Silica Wet Masterbatch

  • Kim, Woong;Ryu, Gyeongchan;Hwang, Kiwon;Song, Sanghoon;Kim, Wonho
    • Elastomers and Composites
    • /
    • 제55권3호
    • /
    • pp.167-175
    • /
    • 2020
  • Various studies have been conducted to improve silica dispersion of silica filled tire tread compounds; among them, silica wet masterbatch (WMB) technology is known to be suitable for manufacturing silica filled compounds that have high silica content and high dispersibility. Till now, the WMB study is focused on the natural rubber (NR) or emulsion styrene-butadiene rubber (ESBR) that does not have a silica-affinity functional group, and a study of NR or ESBR having a silica-affinity functional group is still not well known. Unlike the dry masterbatch technology, the WMB technology can solve the problems associated with the high Mooney viscosity when applied to silica-friendly rubber. However, a coagulant suitable for each functional group has not yet been determined. Therefore, in this study, different coagulant applied silica WMB was prepared by applying calcium chloride, sulfuric acid, acetic acid, and propionic acid by using a carboxyl group functionalized reversible addition fragmentation chain transfer ESBR. The evaluation of the WMB compounds revealed that the calcium chloride added WMB compound showed excellent silica dispersion, abrasion resistance, and rolling resistance.

CFD모사 기법을 이용한 관내 혼화장치내 흐름 특성 평가 (Evaluation of Flow Characteristics within In-Line Mixer for Water Treatment using CFD Technique)

  • 박대진;박영오;박노석;김성수;왕창근
    • 상하수도학회지
    • /
    • 제22권3호
    • /
    • pp.351-358
    • /
    • 2008
  • The modified in-line mixer which was suggested in this study for small water treatment facilities was evaluated on the performance of coagulation. For the objectives of this research, computational fluid dynamics(CFD) simulation was applied for analysis of flow characteristics within the modified in-line mixer. For verifying the results of CFD simulation, wet tests for the pilot plant were conducted. The wet test was to measure the actual coagulant dispersion distribution on the overall cross-section at a distance of 5.5D from the chemical injection point. From the results of CFD simulation and wet test, it was shown that the coagulant dispersion within the modified in-line mixer was occurred more uniformly than within the existing PDM(Pump diffusion Mixer). The results have confirmed the modified in-line mixer had several advantages compared with the existing PDM in terms of dispersion efficiency.

CFD모사 기법을 이용한 Pump Diffusion Mixer내의 응집체 확산분포에 대한 평가 (Evaluation of Coagulants Dispersion in Pump Diffusion Mixer for Water Treatment)

  • 박영오;박노석;김성수;김기돈;임경호
    • 상하수도학회지
    • /
    • 제22권1호
    • /
    • pp.49-63
    • /
    • 2008
  • The objectives of this research were to evaluate the pressurized/the main inlet water flowrate ratio which have been used as the most important parameter for operating the pump diffusion mixer until now, to suggest the alternative operating parameter and the relating criteria if the flowrate ratio was not inadequate. For the objectives of this research, computational fluid dynamics (CFD) simulation was conducted for 21 cases of flowrate ratio in full-scaled pump diffusion mixer. From the results of CFD simulation, the local velocity gradient values were calculated in each case in order to analyze the simulation results in more detail. For verifying CFD simulation, wet test was conducted. The wet test was to measure the factual coagulant dispersion distribution at a distance of 5.4m from deflector. From both results of CFD simulation and wet test, flowrate ratio was inadequate as operating parameter or criteria, on the other hand the pressurized/the main inlet velocity ratio(dimensionless) was useful in predicting the performance of pump diffusion mixer. Also, the injected coagulant could be dispersed evenly in overall cross section on the condition that pressurized/the main inlet velocity ratio(dimensionless) is over at least 20.

정수처리시 천연유기물질의 제거에 대한 급속혼화유형의 영향 (Influence of Different Mixing Types on the Removal of Natural Organic Matter in Water Treatment)

  • 김현철;유명진;이석헌
    • 상하수도학회지
    • /
    • 제19권3호
    • /
    • pp.370-377
    • /
    • 2005
  • Dispersion of coagulant should be completed in a fraction of a second before the metal hydroxide precipitate has form. For the reason so-called pump diffusion flash mixing (PDFM) have been proposed, and PDFM is one of reasonable methods to quickly disperse the hydrolyzing metal salts. In this study, therefore, we attempt to understand the difference of removal characteristics of natural organic matter (NOM) between pump diffusion flash mixing (PDFM) and conventional rapid mixing (CRM) for coagulation in a water treatment system, and to enhance the removal of NOM through the improved mixing process. DOC and turbidity removal by PDFM higher than those by CRM, while SUVA value of water treated by PDFM was high as compared with that by CRM. Hydrophilic NOM was more effectively removed by PDFM than CRM, since charge neutralization effect increased by quick dispersion of coagulant. The DBP formation potentials due to NOM was effectively reduced by the improved mixing (i.e., PDFM) for coagulation and could be controlled through decrease in concentration of precursor rather than reduction of activity with disinfectant.

정수처리시 Fe(III) 응집제를 사용한 응집동력학에 대한 온도의 영향 (Effects of Temperature on Flocculation Kinetics Using Fe(III) Coagulant in Water Treatment)

  • 강임석
    • 한국환경과학회지
    • /
    • 제4권2호
    • /
    • pp.181-194
    • /
    • 1995
  • 여러가지 다양한 상수처리 실험조건에서 응집제로 Ferric Nitrate를 사용하여 수증의 카오린 점토입자를 응결하는 과정중의 응집동력학을 조사하기 위하여 본 영구는 수행되었다. 응집동력학을 측정하기 위한 방법으로서 AIA 시스템으로 부터 없어진 입자크기분포와 Rlowing suspension에서의 PDA에 의한 탁도증가 정도의 측정이 사용되었다. 결론으로서, 저온에서의 응집은 그 효율이 상당히 저하 되는것으로 발견 되었으며 저온에서의 응집을 향상시키기 위아여 수중의 pH보다는 pOH를 일정하게 유지하는 것이 부분적으로 응집효율향상에 도움이 되는 것으로 나타났다.

  • PDF

3-D 전산유체를 이용한 급속혼화조 형상에 따른 난류 유동장 연구 (The Effects of Mixer Geometry on Hydraulic Turbulence : Computational Modeling)

  • 박노석;김성훈;박희경
    • 대한환경공학회지
    • /
    • 제22권7호
    • /
    • pp.1173-1182
    • /
    • 2000
  • 지금까지 급속혼화는 정수처리 공정 중에서 매우 중요한 공정으로 인식되어 왔다. 특히, 응집제의 원수내 확산은 급속혼화 공정에 이어지는 flocculation이나 filtration 공정에 지대한 영향을 미치게 되므로 지금까지 많은 연구자들이 혼화장치의 개발이나 효율적인 혼화방식에 관해 연구를 해왔다. 그러나 선행 연구자들은 급속혼화에 있어서 중요한 변수로 응집제 주입량, pH, 임펠러의 회전속도, 그리고 G값만을 고려하였으나, 실제 응집제와 콜로이드입자와의 충돌기회에 지대한 영향을 미치는 급속혼화 공정상에서 발생되는 난류장을 간과하였다. 특히 급속혼화에서의 난류의 발생은 G값에 전적으로 의지하여 난류장의 평균값으로 혼화조내의 난류를 표현하여 왔으며, 혼화조의 형상에 따라 달라지는 난류장 해석은 연구가 미약한 실정이다. 이에 본 연구는 급속혼화에서 난류장 해석의 중요성을 인식하고 혼화조의 형상 변화에 따라 달라지는 난류장을 전산유체 프로그램을 통하여 해석하였다. 그리고 혼화조 형상을 달리하며 jar-test를 수행한 결과 배플이 없는 원형 jar의 경우가 배플이 장착된 원형 jar나 Hudson jar보다 응집제의 확산에 따른 탁도 제거효율이 좋은 것으로 나타났으며, 전산유체 프로그램을 이용하여 각각 모사한 결과 벽면효과나 사류지역의 발생 등으로 배플이 없는 원형 jar가 혼화에 효과적인 난류장이 분포되는 것으로 확인되었다. 이 결과를 통해 혼화조 형상이 응집제의 확산이나 난류장의 발생에 영향을 미치는 것으로 결론 내릴 수 있다.

  • PDF