• 한국재료학회지
• /
• 제11권8호
• /
• pp.713-717
• /
• 2001

비정질 $Tb_{45.7}$ $Fe_{54.3-x}$ /$Co_{x}$ 및 $Tb_{50.2}$ /$_{Fe}$ 49.8-x/$Co_{x}$ (0$\leq$$x\leq$9.6) 합금박막의 자기적 특성 및 자기변형특성에 대하여 체계적으로 조사하였다. 박막제조는 Fe 타게트에 Tb, Co 소편으로 구성된 복합타겟 방식의 rf 마그네트론 스퍼터링법에 의해 제조하였다. XRD 조사에의 한 박막의 미세구조는 잘 발달된 비정질 구조를 나타내었다. $Tb_{45.7}$ $Fe_{54.3-x}$ $Co_{x}$ (x=2~4)에서 우수한 고유자기변형특성 및 저자기장자기변형특성을 얻었다. 즉, 100 Oe의 저자장에서 130ppm의 자기변형을 나타내었으며 고유자기변형 (인가 자기장, 5 kOe)은 330ppm에서 400ppm으로 증가하였다.

• 한국재료학회지
• /
• 제10권8호
• /
• pp.525-531
• /
• 2000

플라즈마 화학증착법을 이용하여 Corning glass 1737 기판에 안티몬 도핑 산화주석 박막을 증착하였다. 플라즈만 화학증착시 반응변수에 따른 박막의 결정상 및 형성된 표면거칠기에 대하여 XRD와 AFM을 이용하여 검토하였다. 반응온도 $450^{\circ}C$, 유입가스비 R[$P_{SbCl}P_{{SnCl}_4}$]=1.12, r.f. power 30W에서 비교적 결정성이 뛰어난 박막을 얻을 수 있었다. 화학증착법(TCVD)에 비해 플라즈마 열화학증착법(PECVD)으로 얻은 박막의 표현형상이 보다 균일하였다. 안티몬 도핑농도가 증가할수록, 증착온고가 낮을수록, 증착두께가 작을수록 박막의 표면거칠기가 보다 감소하였다.

• 한국표면공학회지
• /
• 제35권4호
• /
• pp.211-217
• /
• 2002

Ti-Si-N films were deposited onto WC-Co substrate by a RF-PECVD technique. The deposition behaviors of Ti-Si-N films were investigated by varying the deposition temperature, RF power, and reaction gas ratio (Mx). Ti-Si-N films deposited at 500, 180W, and Mx 60% had a maximum hardness value of 38GPa. The microstructure of films with a maximum hardness was revealed to be a nanocomposite of TiN crystallites penetrated by amorphous silicon nitride phase by HRTEM analyses. The microstructure of maximum hardness with Si content (10 at.%) was revealed to be a nanocomposite of TiN crystallites penetrated by amorphous silicon nitride phase, but to have partly aligned structure of TiN and some inhomogeniety in distribution. and At above 10 at.% Si content, TiN crystallite became finer and more isotropic also thickness of amorphous silicon nitride phase increased at microstructure.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권12호
• /
• pp.607-613
• /
• 2001

Molybdenum thin films were deposited on the soda lime glass(SLG) substrates by direct-current planar magnetron sputtering, with a sputtering power density of $4.44W/cm^2$. The working pressure was varied from 0.5 mtorr to 20 mtorr to gain a better understanding of the effect of sputtering pressure on the morphology and microstructure of the Mo film. Thin films of $CU(InGa)Se_2$ (CIGS) were deposited on the Mo-coated glass by three stage co-evaporation process. The highest efficiency device was obtained at the maximum value of the tensive stress. The morphology of Mo-coated films were examined by using scanning electron microscopy The film's microstructure, such as the preferred orientation, the full width at half-maximum(FWHM), and the residual intrinsic stress were examined by X-ray diffraction.

• 한국재료학회지
• /
• 제14권6호
• /
• pp.402-406
• /
• 2004

$WSi_2$, $TiSi_2$, $CoSi_2$, and $TaSi_2$ are general silicides used today in semiconductor devices. $WSi_2$ thin films have been proposed, studied and used recently in CMOS technology extensively to reduce sheet resistance of polysilicon and $n^{+}$ region. However, there are several serious problems encountered because $WSi_2$ is oxidized and forms a native oxide layer at the interface between $WSi_2$ and $Si_3$$N_4$. In this study, we have introduced 20 $slm-N_2$ gas from top to bottom of the furnace in order to control native oxide films between $WSi_2$ and $Si_3$$N_4$ film. In resulting SEM photographs, we have observed that the native oxide films at the surface of $WSi_2$ film are removed using the long injector system.

• 한국재료학회지
• /
• 제4권5호
• /
• pp.535-540
• /
• 1994

Thin film magnet was fabricated by radio frequency magnetron sputtering using $Nd_13/(Fe.Co)_{70}B_{17}$ alloy target and magnetic properties were investigated according to sputtering conditions from the metallurgical point of view. we could obtain the best preferred orientation of $Nd_2Fe_{14}B$ phase at substrate temperatures between $450^{\circ}C$ and $460^{\circ}C$ with the input power 150W, and thin films had the anisotropic magnetic properties. But, as the thickness of thin film increased, the c-axis orientation gradually tended to be disordered and magnetic properties also become isotropic. Just like Nd-Fe-B meltspun ribbon, the microstructure of thin film magnet was consisted of very find cell shaped $Nd_2Fe_{14}B$ phase and the second phase along grain boundary. While, domain structure showed maze patterns whose magnetic easy axis was was perpendicular to film plane of thin film. It was concluded from these results that the perpendicualr anisotropy in magnetization was attributed to the perpendicular alignment of very find $Nd_2Fe_{14}B$ grains in thin film.

• 한국자기학회지
• /
• 제25권5호
• /
• pp.144-148
• /
• 2015

스피넬 결정구조를 지니는 $CoMn_2O_4$ 박막을 증착하였으며 이들 박막의 물리적 특성을 후열처리 이전과 이후로 비교 조사하였다. 증착온도인 $720^{\circ}C$보다 낮은 $700^{\circ}C$에서의 후열처리 과정 이후, 열처리 이전의 불분명했던 tetragonal 결정구조가 분명하여졌으며 이는 곧 표면상태의 변화로도 관측되었다. 자성특성의 경우 약 100 K에서 다결정 형태의 벌크에서는 측정할 수 없었던 상전이가 관측되었다. 상전이온도 이상의 온도에서는 전형적인 강자성 특성을 보이는 반면 상전이온도 이하에서는 페리자성 특성을 보였다. 특히 열처리 이후에는 페리자성 특성은 매우 뚜렷하여졌다. 이와 같은 결과는 후열처리과정이 $CoMn_2O_4$ 박막의 물리적 특성을 결정짓는데 필수적임을 의미한다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권1호
• /
• pp.5-8
• /
• 2007

We have investigated the superconducting properties and surface morphology of $Sm_xBa_yCu_3O_{6+z}$ thin films deposited on LMO/IBAD-MgO/Hastelloy which prepared with different composition ratio by co-evaporation method(EDDC, Evaporation using Drum in Dual Chambers). We observed the composition ratio of SmBCO thin films by EDS analysis. We fabricated SmBCO thin film with critical current density of $1.5{\times}10^6A/cm^2$ at composition ratio of SM:Ba:Cu=1.10:2.01:3(at 77 K self-field). And, we confirmed that substitution of Sm-Ba did not occur at Cu rich phase by EDS analysis.

• 한국표면공학회지
• /
• 제42권3호
• /
• pp.128-132
• /
• 2009

Transparent conducting thin films of indium tin oxide(ITO) co-sputtered with aluminum-doped zinc oxide(AZO) were deposited on glass substrate by dual magnetron sputtering. It was found that the electrical properties and structural characteristics of the films are significantly changed according to the sputtering power of the AZO target. The IAZTO film prepared with D.C power of ITO at 100 W and R.F power of AZO at 50 W shows an electrical resistivity of $4.6{\times}10^{-4}{\Omega}{\cdot}cm$ and a sheet resistance of $30{\Omega}/{\square}$ (for 150 nm thick). Besides of the improvement of the electrical properties, compared to the ITO films deposited at the same process conditions, the IAZTO films have very smooth surface, which is due to the amorphous nature of the films. However, the electrical conductivity of the IAZTO films was found to be deteriorated along with the crystallization in case of the high temperature deposition (above $310^{\circ}C$). In this work, high quality amorphous transparent conductive oxide layers could be obtained by mixing AZO with ITO, indicating possible use of IAZTO films as the transparent electrodes in OLED and flexible display devices.

• 한국재료학회지
• /
• 제9권11호
• /
• pp.1055-1061
• /
• 1999

투명차폐재를 목적으로 Indium Tin Oxide (ITO) 투광성 박막을 제조하고 전자파 차폐특성에 대해 조사하였다. 박막은 RF magnetron co-sputtering 증착장비를 사용하여 제작하였다. RF 인가전력, Ar 및 $O_2$분압, 기판온도를 변화시키며 전기전도도와 투광성을 겸비한 박막의 조성과 구조에 관한 실험을 진행하였다. 최적의 증착조건은 $300^{\circ}C$의 기판온도, 20sccm의 아르곤 유량, 10sccm의 산소유량, 그리고 In과 Sn의 인가전력이 각각 50W와 30W일 경우였으며, 이때 얻어진 박막은 육안으로 분명할 정도의 투광성을 보였고 5.6$\times10^4$mho/m의 높은 전기전도도를 나타내었다. 이렇게 제조된 ITO 박막의 전자파 차폐효과를 차폐이론에 의해 분석하였다. 박막의 전기전도도, 두께, skin depth로부터 차폐기구(흡수손실, 반사손실, 다중반사 보정항)에 대해 고찰하였다. 계산된 차폐효과는 26dB의 값을 보여 투광성 차폐재로 ITO 박막의 사용 가능성을 제시할 수 있었다.