• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.44 no.3
• /
• pp.239-249
• /
• 2008

Trawlers have to a sufficient towing force due to it's characteristics of the high performance. The newly constructed trawler with the conventional propellers shows the sufficient towing force, so that the propeller and engine are optimized. In the 1970s, many trawlers were imported from overseas by Korean fisheries industries. But the engine output degradation with year by year caused the trawlers to decrease the towing speed of the vessels. On the previous studies, the nozzle propeller had not so good efficiency with increasing of resistance in high-speed cruising operation over 15knots. But the trawling operation is just required the higher thrust and towing force, so that the nozzle propeller is very profitable for the it's effectiveness. A new nozzle propeller was designed for the 4,462G/T trawler, Dong-San, operated by Dongwon Industries Co., Ltd. to improve the towing speed, and the model tests were performed. The model ship and model propeller are preciously manufactured and used model tests in basin. The resistance test and propeller open water test were performed for the cases of the half and full loads. The required engine horse power and RPM were evaluated analytically by the speed-power curve, when the trawler was equipped with the nozzle propeller. The results of tests showed that the towing speed 4.85knots on the design load waterline requires the 200 engine RPM and 2,567ps in the delivered horsepower.

• Geophysics and Geophysical Exploration
• /
• v.21 no.4
• /
• pp.262-272
• /
• 2018

A system for microseismic monitoring due to underground displacements is being operated in several mining areas in order to analyze ground subsidence. Microseismic monitoring system mainly consist of three components; 3-component geophone, data logger and analysis program. The previous analysis program had found the location of microseismic source by analysing only first arrivals of P-waves, but the upgraded analysis program has improved accuracy of the location by analysing both P- and S-waves. This analysis program also has upgraded the function to calculate the microseismic magnitude by using regional specific coefficient and microseismic amplitude. Also the program has upgraded the function to confirm visual location of microseismic source by superimposing field aerial photographs and the results.

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.373-375
• /
• 2002

Lhcb genes encoding light-harvesting chlorophyll-a/b binding (LHC) proteins of photosystem (PS) II were comprehensively characterized using the expressed sequence tag (EST) databases in the green alga, Chlamydomonas reinhardtii. The gene family was composed of eight Lhcb genes including four new genes, which were isolated and sequenced. The effects of light intensity on the levels of mRNAs accumulation of multiple Lhcb genes were studied under various conditions. The results indicate that Lhcb genes are coordinately regulated in response to light conditions, and repressed when the input light energy exceeded the requirement for $CO_2$ assimilation. The effects of high light on the expression of the Lhcb genes observed in the presence of an electron transport inhibitor, DCMU, and in mutants deficient in photosynthetic reaction centers suggest the presence of two alternative mechanisms for regulating the genes expression under high-light conditions.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2003.12a
• /
• pp.360-360
• /
• 2003

• Journal of the Korean Ceramic Society
• /
• v.44 no.2 s.297
• /
• pp.103-109
• /
• 2007

In this study, the rheological properties of cement pastes containing blastfurnace slag of different fineness were investigated. The fluidity of cement pastes with low Blaine value blastfurnace slag was increased with decreasing the plastic viscosity and the yield stress of pastes. And the optimum dosage of polycarboxylate type superplasticizer to the cement pastes was confirmed according to the fineness and the replacement ratio of blastfurnace slag. All cement pastes showed the thixotropy behavior. And also it was formed that the segregation range of cement pastes was occurred below $10D/cm^2$ of the yield stress and below 350 cPs of the plastic viscosity by the coaxial cylinder viscometer.

• Fashion & Textile Research Journal
• /
• v.11 no.4
• /
• pp.641-647
• /
• 2009

The purpose of this study was to evaluate the physical properties and handle of knitwears made with silver yarns. The four different knitted fabrics were made and compared: cotton(C), cotton/silver(CS), polyester(P), and polyester/silver(PS). If fabrics knitted with silver combined yarns, their electrical shield properties, UV-cut properties, anti-static properties, and air permeability were improved. As an additional effect this also improves the antibacterial properties of fabrics. It was found that overall physical properties and functional properties were improved by using silver yarn with cotton. The silver knitted fabric was found to be improved its softness and fullness hand for apparel.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10d
• /
• pp.602-607
• /
• 2007

최근 4G 이동통신 시스템의 진화를 위한 단계로 기존의 이동통신 시스템을 유지하면서 효율 극대화를 통한 비용 절약 측면과 고 주파수 대역을 이용한 셀 간격의 협소화로 인해 나타나는 문제점에 대한 대안으로 커버리지 확대와 데이터 처리율 향상을 위한 IEEE 802.16j 표준화 작업이 진행 중에 있다. 향후 VoIP 서비스를 위한 업링크 스케줄링 기법으로 몇 가지가 IEEE 802.16j에 제시되어 있으나, 본 논문에서는 보이스 트래픽 특성 및 수학적 모델링을 통하여 기존 방법들보다 더 효율적인 대역 이용을 통해 같은 대역폭 대비 성능과 용량 면에서 개선된 스케줄링 기법인 eertPS를 제시하여 IEEE 802.16j Multi-Hop 환경하에서도 대역 효율적인 VoIP 서비스를 이용할 수 있도록 한다.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.9
• /
• pp.3274-3280
• /
• 2011

Monodispersed porous NiO and $Co_3O_4$ microcapsules with a hollow core were synthesized using SBA-16 silica sol and PS as a hard template. The porous hollow microcapsules were characterized by XRD, TEM and $N_2$ adsorption/desorption analysis. After $H_2$ reduction of metal oxide microspheres, they were conducted as an active catalyst in the reduction of chiral butylronitrile and cyanobenzene. The mesoporous metals having a hollow structure showed a higher activity than a nonporous metal powder and an impregnated metal on the carbon support.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.64-65
• /
• 2008

3D microbattery에 사용할 수 있는 $LiMn_2O_4$ 3차원 박막전극을 제조하여 그 전기화학적 특성을 관찰하였다. 3차원 구조의 형성을 위하여 먼저 polystyrene(PS) microsphere를 platinum이 증착된 Si/$SiO_2$ 기판위에 dip-coating 방식으로 코팅시켜 template로 사용하였다. 그 위에 sol-gel법을 이용, 박막을 형성시킨 후 template 를 제거하는 방식으로 $LiMn_2O_4$ 3차원 박막전극을 형성하였는데 이때 solution은 Lithium acetylacetonate[$LiCH_3CO-CHCOCH_3$], Manganese(III) acetylacetonate [Mn$(CH_3COCHCOCH_3)_3$]를 source 물질로 1-butanol과 acetic acid를 solvent로 활용하여 제조하였다.

• Proceedings of the KAIS Fall Conference
• /
• 2004.11a
• /
• pp.269-271
• /
• 2004

최근 지구의 온난화를 가속시키고 있는 온실가스(Greenhouse gas)가운데 하나인 $CO_2$와 Styrene Oxide를 Methylene chloride에서 Zinc Glutarate를 촉매로 하여 800-1000ps1, $75^{\circ}C$에서 반응시켜 Poly(styrenecarbonate)(PSC)를 합성하였다. 합성된 고분자는 FT-IR과 H-NMR, C-NUR로 분석하였다.