• 한국농공학회논문집
• /
• 제56권6호
• /
• pp.169-176
• /
• 2014

To evaluate bio-cementation of microbial on sands, laboratory test was conducted using acrylic cubic molding boxes ($5cm{\times}5cm{\times}5cm$). It was incubated the microbial, called Bacillus Pasteurii, according to Park et al (2011, 2012). and applied 50ml each specimen. Two type of sand samples used were Jumoonjin sand and common sand (well graded). These sands were molded in acrylic boxes with the relative density of 30 % and 60 % respectively. Microbial were poured onto the samples molded in acrylic boxes and cured at the room temperature and humidity. After 7, 14 and 21days, it was measured the compressive strength, pH, EC, and density and it were observed SEM and XRD to verify the effect of bio-cementation. It was found that bio-cementation was increased a strength of sands and it was appeared that strengths were related to the type of sand and relative density. Therefore it was confirmed the solidification of sands using the bio-cementation by microbial activation and the usefullness of acrylic molding boxes when tests were conducted on the soil of sands.

• 자원환경지질
• /
• 제30권4호
• /
• pp.327-340
• /
• 1997

Geochemical characteristics of groundwater, based on chemical analyses of 54 water samples, differ among main rocks of Haman formation, Panyawoel formation, andesite and granite in Daegu area in relation to mineralogical and chemical compositions of the rocks. Concentrations of most solutes are higher in groundwaters of Haman and Panyawoel formations than in those of andesite and granite. High concentrations of $Ca^{2+}$ and $Mg^{2+}$ in groundwaters of the sedimentary rocks result mainly from reaction of $CO_2$-charged water with calcite and weathered feldspars. Average groundwaters in the sedimentary rocks are oversaturated with respect to calcite. Major types of groundwaters are hard $Ca(HCO_3)_2$ and $CaSO_2-CaCl_2$ with hardness of 442 mg/l for Haman formation and 275 mg/l for Panyawoel formation whereas they are soft $Ca(HCO_3)_2$ with hardness 35 mg/I for andesite and 39 mg/I for granite. $Ca(HCO_3)_2$ type results mainly from calcite-dissolution and $CaSO_4-CaCl_2$ from pyrite and partly from domestic pollutants. $CaSO_4-CaCl_2$ type may indicate that groundwaters in the sedimentary rocks are more evolved geochemically than those in the igneous rocks, but it is not obvious because the type might be affected by pyrie dissolution and domestic pollutions. Acid rain is buffered by active calcite in the sedimentary rocks. In the igneous rocks acid rain might react with gibbsite and other forms of $Al(OH)_3$ that might have accumulated as weathering products of primary silicates, and is buffered.

• 한국자동차공학회논문집
• /
• 제16권5호
• /
• pp.179-189
• /
• 2008

The performance of Lean NOx Trap (LNT) based on the catalysts of Pt/K/Ba/$\gamma-Al_2O_3$ with proprietary washcoat formulation is studied using a bench flow reactor system. To investigate the effect of temperature and gas hourly space velocity (GHSV) on the nitrogen oxides (NOx) trapping capacity as well as NOx breakthrough time and final ratio of $NO_2$ to NO of LNT, series of adsorption isotherms are carried out with simulated exhaust gases of the lean burn engines. Since typical operation of LNT requires periodic regeneration with a short rich excursion, where the stored or trapped NOx is released and subsequently reduced to $N_2$, the effect of the duration of lean and rich phase and type of reductants on the NOx conversion is investigated. NOx storage capacity and breakthrough time obtained from adsorption isotherms shows a volcano-type dependence on the temperature with a maximum NOx storage capacity occurring $350^{\circ}C$ and with a maximum breakthrough time occurring $400^{\circ}C$ at all GHSVs investigated in this study. Also, maximum ratio of $NO_2$ to NO is obtained at $400^{\circ}C$ with a GHSV of $75,000\;hr^{-1}$ Lean/rich cycle of 100 s lean and 5 s rich used with a concentration of 1.33% of $H_2$ and 4% of CO in the rich phase is found to be optimum at operating temperature of $350^{\circ}C$ and a GHSV of $50,000\;hr^{-1}$.

• 지질공학
• /
• 제17권3호
• /
• pp.351-358
• /
• 2007

본 연구에서는 피에조콘 관입시험(PCPT)결과를 사용한 연약지반의 과압밀비(OCR)결정의 타당성을 평가하고자 양산-물금지역의 연약지반에서 실시된 피에조 콘 관입시험 자료와 동일지역 44개소에서 심도별로 시추한 총 172개 자연시료를 사용하여 기본적인 실내토질시험 결과를 사용하였다. 실내압밀시험 결과로부터 구한 과압밀비($OCR_c$)와 압밀시험에 사용된 시료와 상응하는 지역에서 실시된 피에조콘 관입시험 결과로 구한 과압밀비($OCR_p$)를 비교 분석하여 피에조콘 관입시험 결과와 과압밀비의 상관 관계식을 제시하였다. 본 연구에 사용된 점토의 경우 Poewll 등(1994)이 균열이 없는 점토를 대상으로 하여 제안한 경험식으로 구한 과압밀비가 표준압밀시험으로 구한 과압밀비와 가장 잘 부합되는 것으로 나타났다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.759-767
• /
• 2009

대규모 연약지반개량 설계는 압밀영향인자의 불확실성으로 대부분 신뢰성해석을 도입하여 설계를 수행하는 추세이다. 신뢰성해석은 이론습득의 어려움으로 인하여 실무 기술자들에게 범용되지 못하고 있다. Duncan(2000)이 제안한 간편하고 유용하게 사용할 수 있는 신뢰성해석 간편법과 전통적인 신뢰성해석법의 해석결과를 비교하여 간편법의 적용성을 평가하였다. 민감도분석에서는 동일한 경향을 보였으나, 파괴확률은 약 20~50%의 오차를 보이고 확률변수의 확률분포에 따른 적용성이 떨어지는 것으로 평가되었다. 신뢰성해석 간편법은 개략설계시 결정론적해석과 상호 보완적으로 적용한다면 최적설계가 이루어질 수 있을 것으로 사료된다.

• 한국수소및신에너지학회논문집
• /
• 제18권1호
• /
• pp.52-59
• /
• 2007

We investigated the effects of the addition of Mn and $AB_5$ type alloy on the electrochemical characteristics of Ti-Cr-V BCC type alloys as anode materials for Ni-MH battery. The activation behavior and discharge capacity of the BCC type alloys were significantly improved by ball-milling with the $LmNi_{4.1}Al_{0.25}Mn_{0.3}Co_{0.65}$ alloy, because the $AB_5$ type alloy acted as hydrogen path on the surface of the BCC type alloy. Among the Mn substituted alloys($Mn=0.03%{\sim}0.08%$), the $Ti_{0.32}Cr_{0.38}Mn_{0.05}V_{0.25}$ alloy ball-milled with $AB_5$ type alloy exhibited the greatest discharge capacity of $336\;mAh{\cdot}g^{-1}$. In addition, Mn substituted alloys exhibited the lower plateau pressure in P-C- T curve, the better hydrogen storage capacity and faster surface activation compared with the alloy without Mn.

• KSBB Journal
• /
• 제29권1호
• /
• pp.50-57
• /
• 2014

NF-${\kappa}B$ is a transcriptional factor which is involved in many biological processes including immunity, inflammation, and cell survival. Many investigators studied on the mechanism involved in activation of NF-${\kappa}B$ signalling pathway via ubiquitination and degradation of $I{\kappa}B$ regarding skin disease. Some specific molecules including Akt, MEK, p38 MAP Kinase, Stat3, et al. represent convergence points and key regulatory proteins in signaling pathways controlling cellular events such as growth and differentiation, energy homeostasis, and the response to stress and inflammation. Ultraviolet (UV) irradiation has many adverse effects on skin, including inflammation, alteration in the extracellular matrix, cellular senescence, apoptosis and skin cancer. Prunus mume, a naturally derived plant extract, has beneficial biological activities as blood fluidity improvement, anti-fatigue action, antioxidative and free radical scavenging activities, inhibiting the motility of Helicobacter pyolri. Previous reports on various beneficial function prompted us to investigate UVB-induced or other immunostimulated biological marker regarding P. mume extract. P. mume extract suppresses UVB-induced cyclooxygenase-2 (COX-2) expression in mouse skin epidermal JB6 P+ cells. The activation of activator protein-1 and nuclear factor-${\kappa}B$ induced by UVB was dose-dependently inhibited by P. mume extract treatment. This results suggest that P. mume extracts might be used as a potential agents for protection of inflammation or UVB induced skin damage.

• 대한치과보철학회지
• /
• 제45권5호
• /
• pp.665-674
• /
• 2007

Purpose: The purpose of this study was to investigate the effect of sire and shape of retention element on the bond strength of indirect composite resin and metal. Material and method: The metal disk specimens, each 6mm in diameter, were cast from CrCo alloy. They were divided into 8 groups by applied retention element. retention bead group $B2\;({\phi}\;0.2mm),\;B4\;({\phi}\;0.4mm),\;B6\;({\phi}\;0.6mm),\;B8\;({\phi}\;0.8mm)$, retention crystal group C2 (0.2mm), C5 (0.5mm), C8 (0.8mm) and sandblasting group SB ($110{\mu}m\;Al_2O_3$ blasting) as control. Eighty-eight metal specimens were veneered with $TESCERA^{(R)}$ Indirect resin system. One specimen of each group was sectioned and the resin-metal bonding pattern at the interface was observed under measuring microscope. Other specimens were then tested for tensile bond strength on an Instron universal testing machine at a crosshead speed of 2mm/min. Results: 1. Compared to sandblasting, beads or crystals increased the resin-metal bond strength (P<.05). 2. 0.2mm retention crystals were most effective in improving the resin-metal bond strength (P>.05). 3. 0.2mm beads showed the highest bond strength among retention bead groups, but there was no statistically significant difference (P>.05). 4. Retention crystals tend to be higher in bond strength than retention beads due to wider surface area. 5. The larger retention element, the larger the undercut for the mechanical retention, but the gap at resin-metal interface was also increased. Conclusion: Within the limitations of this study, 0.2mm retention crystals were most effective in improving the resin-metal bond strength.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.1-2
• /
• 2009

The high critical current ($I_c$, A) of SmBCO coated conductor in a magnetic field, the high production rate and the high material yield are promising for applications. The inhomogeneity of Ie at the long length coated conduct is very important problem for electric application. So we researched the reason of inhomogeneity of $I_c$ at long length tape prepared by batch type co-evaporation system called by EDDC. The long length SmBCO coated conductors were developed on $LaMnO_3/IBAD-MgO/Y_2O_3/Al_2O_3$/Hastelloy C276 template. The distribution of $I_c$ are from 0 to 397 A/cm at 77 K and self field. We have studied the microstructures of these films by using SEM, EDS and X-ray diffraction. The XRD and composition by EDS results of SmBCO film reveals subtle difference. But, the microscopic observation by SEM show the microcrack at the sample with low $I_c$.

• 한국세라믹학회지
• /
• 제34권6호
• /
• pp.636-644
• /
• 1997

The effect of various processing parameters, in particular the substrate and filament temperature, on the nucleation of diamond has been studied for the hot filament CVD process with a negative bias on the substrate. As far as the substrate temperature was maintained around the critical temperature of 73$0^{\circ}C$, the nucleation of diamond increased with increasing filament temperature. The maximum nucleation density of ~ 2$\times$109/$\textrm{cm}^2$ was obtained under the condition of filament temperature of 230$0^{\circ}C$, substrate temperature of 75$0^{\circ}C$, bias voltage of 300V, methane concentration of 20%, and deposition time of 2 hours. This nucleation density is about the same as those obtained in previous investigations. For fixed substrate temperatures, the nucleation density varies up to about 103 times depending on experimental conditions. This result is different from that of Reinke, et al. When the substrate temperature was above 80$0^{\circ}C$, a silkworm~shaped carbon phase was co-deposited with hemispherical microcrystalline diamond, and its amount increased with increasing substrate temperature. The Raman spectrum of the silkworm-shaped carbon was the same as that of graphitic soot. The silkworm-shaped carbon was etched and disappeared under the same as that of graphitic soot. The silkworm-shaped carbon was etched and disappeared under the deposition condition of diamond, implying that it did not affect the nucleation of diamond.