• Korean Journal of Agricultural and Forest Meteorology
• /
• v.7 no.4
• /
• pp.296-302
• /
• 2005

We investigated changes in photosynthetic characteristics of P. davidiana in order to understand damage patterns to photosynthetic apparatus under drought stress. Root sprout saplings of P. davildiana were treated with $0\%,\;2\%,\;5\%,\;and\;10\%$ of 300ml polyethylene glycol (PEG) once a weer far one month. After one month, we measured photosynthetic parameters and analyzed the photochemical and $CO_2$ fixation systems. Photosynthetic rate, stomatal conductance, and respiration rate in the leaves of P. davildiana decreased according to increasing stress strength. In the photochemical system, quantum yield of PSII was reduced by the increment of PEG concentration, The decrease of apparent quantum yield was related to reduction of electron transport. Respiration rate decreased with an increase in PEG concentration, whereas photorespiration rate in the $CO_2$ fixation system increased. In conclusion, photosynthesis of P. davidiana responded sensitively under drought stress, and the sensitivity depended upon the strength of water stress. P. davidiana exhibited an increase of water use efficiency under water stress.

• Journal of Plant Biotechnology
• /
• v.3 no.1
• /
• pp.7-12
• /
• 2001

An antiserum against the carrot HSP17 (17 KDa heat shock protein) was raised using the HSP17 purified after being expressed in a recombinant E.coli in order to develop an assay system for thermotolerance in crops. The DCHsp17.7 including the coding sequence corresponding to a carrot HSP17 protein was recombined within pET-32(b) vector and achieved a maximum expression in 4 hours after an induction in E.coli. The purified DCHsp17.7 was used as an antigen to generate the corresponding antibody. The polyclonal antiserum was confirmed for it's specificity only to the low molecular weight (1mw) HSP. Besides, the possibilities to use the antiserum to interact with 1mwHSPs from other plants such as rice, cucumber, tomato, and hot pepper were examined to be plausible. To reveal any specific correlation between the amounts of 1mwHSP expressed upon HS conditions and an acquisition of thermotolerance two different approaches have been applied. first, it has been shown that only the pre-HS conditions inducing the synthesis of HSP17 allowed for the seedlings to achieve an thermotolerance and to survive the following lethal condition. Second, a western analysis using 15 different collected lines of hot peppers was performed to distinguish each other in terms of the amount of 1mwHSP. The results indicated that all 14 hot pepper lines were able to synthesize HSPs in response to an exposure to HS conditions and the amounts of the proteins synthesized at different HS temperatures were variable among the lines. There are several different patterns of 1mwHSP synthesized as a function of temperature increase observed and their correlation to physiological aspects of thermotolerance remains to be analyzed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.2
• /
• pp.69-76
• /
• 2012

This paper proposes a novel way of personalized web search through re-ranking the search results with user profiles of concept-network structure. Basically, personalized search systems need to be based on user profiles that contain users' search patterns, and they actively use the user profiles in order to expand initial queries or to re-rank the search results. The proposed method is a sort of a re-ranking personalized search method integrated with query expansion facility. The method identifies some documents which occur commonly among a set of different search results from the expanded queries, and re-ranks the search results by the degree of co-occurring. We show that the proposed method outperforms the conventional ones by performing the empirical web search with a number of actual users who have diverse information needs and query intents.

• Journal of the Korean Institute of Gas
• /
• v.16 no.5
• /
• pp.58-65
• /
• 2012

Various models are currently applied to predict the dispersion of leaked combustible gas and overpressure from a vapor cloud explosion(VCE). However, those models use simple approaches where topography and barriers of anti-leakage facilities and the effects of buildings were not sufficiently taken into considerations. For this reason, this study has proposed the dispersion process of leaked gas, distribution patterns, and flames and overpressure generated from gas explosions in 2D and 3D virtual spaces by reviewing more accurately analyzable computational fluid dynamics (CFD) model by considering various variables including combustion types of leaked substances, geometry of facility, warm currents, barriers, the influence of wind, and others. The CFD analysis results are anticipated to be usefully applied for the risk analysis of explosion and for the risk-based design.

• Korean Institute of Interior Design Journal
• /
• v.24 no.4
• /
• pp.80-90
• /
• 2015

This study aims to improve plans by analyzing spatial compositions of cohousing common houses, their role depending on the types of users and spaces, and satisfaction from the user-oriented design perspective. For this study, a basic concept was examined based on previous studies and literature reviews. So-Haeng-Ju(Happy House with Communication) Houses 1, 2, and 3 in Seongmisan Village was analyzed. As well, interviews with residents of these houses were conducted to analyze the role of user behavior in common house depending on the types of users and spaces. As a result, it was found that there were common characteristics of roles in an exchange with neighbors, cooperative child-care, and residents' meetings. The time and behavioral types were different depending on the living patterns, characteristics, and family members of residents. User satisfaction with the locations of community facilities including communal kitchen and communal living room, the composition of rooms, communication with residents, and the connection between communal living space and personal living space, was above the average. However, user satisfaction with storage facilities, or defect repair and facility maintenance was low. Most of cohousing common house users were satisfied with the use and size of spaces, and a sense of community, including communication with neighbors beyond the environment and Seongmisan Village. In conclusion, a realistic alternative is required for future cohousing by developing a system regarding human resources networks and cost bearing issues.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.96-102
• /
• 2006

Because of the increasing need to use clayey soil as the backfill in reinforced soil structures and embankment material, nonwoven geotextiles with the drain capability have been receiving much attention. However, there are few studies of the deformation behavior of nonwoven geotextiles at geosynthetics reinforced soil structures in the field because the nonwoven geotextile, which has low tensile stiffness and higher deformability than geogrids and woven geotextiles, is difficult to measure its deformation by strain gauges and to prevent the water from infiltrating. This study proposes a new, more convenient method to measure the deformation behaviour of nonwoven geotextile by using a strain gauge; and examines the availability of the method by conducting laboratory tests and by applying it on two geosynthetics reinforced soil (GRS) walls in the field. A wide-width tensile test conducted under confining pressure of 7kPa showed that the local deformation of nonwoven geotextile measured with strain gauges has a similar pattern to the total deformation measured with LVDT. In the field GRS walls, nonwoven geotextile showed a larger deformation range than the woven geotextile and geogrid; however, the deformation patterns of these three reinforcement materials were similar. The function of strain gauges attached to nonwoven geotextile in the walls works normally for 16 months. Therefore, the method proposed in this study for measuring nonwoven geotextile deformation by using a strain gauge proved useful.

• Journal of IKEEE
• /
• v.2 no.1 s.2
• /
• pp.150-159
• /
• 1998

This paper described the recognition of the Off-line handwritten Hangul based on neural network using a feature extraction method. Features of Hangul can be extracted by a $5{\times}5$ window method which is the modified $3{\times}3$ mask method. These features are coded to binary patterns in order to use neural network's inputs efficiently. Hangul character is recognized by the consonant, the vertical vowel, and the horizontal vowel, separately. In order to verify the recognition rate, three different coding methods were used for neural networks. Three methods were the fixed-code method, the learned-code I method, and the learned-code II method. The result was shown that the learned-code II method was the best among three methods. The result of the learned-code II method was shown 100% recognition rate for the vertical vowel, 100% for the horizontal vowel, and 98.33% for the learned consonants and 93.75% for the new consonants.

• Journal of the Korean Society of Costume
• /
• v.63 no.7
• /
• pp.1-16
• /
• 2013

The objective of this study is to analyze the characteristic of a functional design for a commercial outdoor brand jacket based on 3 types of functions : windproof, waterproof, and cold proof. To analyze the design and fabric characteristics of outdoor jackets by function, 903 men's and women's outdoor jacket images were selected from the catalogues during S/S 2009 - F/W 2011 of the 6 brands: The North Face, Columbia Sports Wear, Kolon Sports, K2, Arcteryx and Mont-Bell. These brands were selected based on their high market share and brand awareness of the outdoor brands in Korea. In this study, design elements analysis was conducted as following 8 elements: hood/collar height/central front flap/waistline/pocket location/ventilation for the body part/sleeve patterns/cuff for the sleeve part. Fabrics were analyzed by the frequency of fabric types used in the 3 jacket types. According to the result derived from the analysis of the six brands of outdoor wear jacket design trends by year, detachable hood and a co-use of velcro and elastic bands have been mainly designed for all of windproof, waterproof, and cold proof jacket to all in order to respond quickly to changes in the external environment. For reinforced storage function on trekking, the number of pockets has been gradually growing, and a function was being developed to connect an electronic device to a pocket. The method, result, and collateral observations relevant to each of these phases are described. Outdoor jacket design characteristics were investigated for outdoor brands, which can provide data to suggest more accurate functional design, and satisfy functional design needs. In this regard, this research was significant in the sense that it suggested preliminary data to reconsider competitiveness of the brand products.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.43 no.3
• /
• pp.247-254
• /
• 2017

Optical Coherence Tomography (OCT) is a non-invasive imaging method that utilizes the optical scattering and interference for visualizing the surface as well as cross-sectional structures of tissue. OCT has been used for diagnosing diseases in early stage in various medical fields, but an application in cosmetics is still at early stage. In this study, OCT was adopted to evaluate skin texture and wrinkle. Results showed similar patterns of evaluation with PRIMOS in the assessment using replica. In addition, OCT produced smaller errors at different angles compared to the PRIMOS in the assessment using 3-dimensional models of wrinkles. The resolution of the image was also high enough to differentiate the images of before and after the application of makeup products. Possible use of OCT in the evaluation of fine wrinkle assessment was studied in this research. Further development of methods is necessary to provide more evidences of the effectiveness.

• Journal of Korean society of Dental Hygiene
• /
• v.18 no.4
• /
• pp.501-513
• /
• 2018

Objectives: The purpose of this study was to investigate the perception of workplace bullying in the dental hygienists to use them as basic data for improving the organizational relationship of the dental hygienists. Methods: The subjects were 302 dental hygienists that had been working at the dental clinics and dental hospitals. These data were analyzed by SPSS Version 20.0 (IBM Co., Armonk, NY, USA). Factor analysis was used for exploratory and confirmatory data. Independent t-test and one-way ANOVA were used to find out mean differences for verbal violence, improper business, and improper work environment according to characteristics of subjects. Results: Upon the study results, there were statistically significant differences between the verbal violence and working patterns according to the mean differences of the subfactors on subject's characteristics. Also, there were statistically significant differences between the improper work environment and all of subject's characteristics. However, there was no statistically significant differences in the improper business. The factor analysis showed that the Workplace Bullying of the dental hygienists was composed of three elements, namely 'verbal violence', 'improper business,' and 'improper work environment.' The validity of the model examined by a confirmatory factor analysis satisfied most of the relevant requirements. The Cronbach's aplha shows a good reliability. Conclusions: In conclusion, it was proven that dental hygienist's Workplace Bullying measurement tool had high validity and reliability. Furthermore, this study can be used to improve dental hygienists' organizational relationship. Therefore, by identifying the recognition of the dental hygienists, this study can contribute to affect a positive influence in the dental hospitals.