• Journal of the Korean Magnetics Society
• /
• v.3 no.4
• /
• pp.305-309
• /
• 1993

Thermal stability of Co/Cu artificial superlattice (AS) prepared by RF-magnetron sputtering and the effect of low temperature annealing on the magnetoresistance of the AS have been investigated in this work. Dependence of annealing behavior on the Cu spacer thickness, Fe underlayer thickness, and kind of the underlayer was examined and the relationship between the interfacial reaction and magnetoresistance was studied. It turned out that when Co/Cu AS was annealed at low temperature ($<450^{\circ}C$), the magnetoresistance could increase in the case of AS with thick spacer Cu ($20~25\AA$) layer, whereas it decreased in the case of AS with thin spacer Cu ($7\AA$) layer, which of the former is in contrast with previous reports and the latter in consistent with them. The increase of magnetoresistance is due to increase of interfacial atomic sharpness, which is supported by low angle X-ray diffraction analysis. The thermal stability of Co/Cu AS was better in the case of thick Fe underlayered AS. Interfacial reaction (separation of intermixed Co and Cu) could be observed at lower temperature for (200)-textured samples than for (111)-textured samples, which can be interpreted in terms of interdiffusion kinetics depending on the crystallographic orientation.

• Journal of the Korean Ceramic Society
• /
• v.43 no.2 s.285
• /
• pp.79-84
• /
• 2006

We studied the microstructure and magnetic property of the pulsed DC magnetron sputtered $Zn_{\0.8}Co_{0.2}O$ film as a function of substrate temperatures. The X-ray patterns of the $Zn_{\0.8}Co_{0.2}O$ film showed a strong (002) preferential orientation at $500^{\circ}C$. The films with a crystallite size of 23-35 nm were grown in the form of nano-sized structure and this tendency was remarkable with increasing substrate temperature. The UV-visible result showed that the $Zn_{\0.8}Co_{0.2}O$ film prepared above $300^{\circ}C$ has a high optical transmittance of over $80\%$ in the visible region. The absorption bands were observed due to sp-d interchange action by $Co^{2+}$ complex ion and dd transition in the region from 500 to 700nm. The resistivity of the film was below $10^{-1}\;\Omega-cm\;above\;300^{\circ}C$. The AGM analysis results for the all films showed the magnetic hysteresis curves of ferromagnetic nature. The low electrical resistivity and room temperature ferromagnetism of ZnCoO thin films 'deposited above $300^{\circ}C$ suggested the possibility for the application to Diluted Magnetic Semiconductors (DMSs).

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.815-822
• /
• 2004

A knowledge of in situ stress state is important to design various engineering structures such as dams, tunnels and so on. There are about three wellknown indicators that is, borehole will breakouts, hydraulic fracturing, ellipsoidal cross section of borehole that have been attributed to the state of stress in the vicinity of borehole. Fortunately, Televiewer traveltime image can be used as a caliper log with 144 or 288 arms, which allows to determine the borehole shape. Televiewer amplitude image will give detailed information about the distribution and character of breakouts and hydraulic fracturing as well. For investigation purposes, a series of boreholes(total 195 boreholes: 12.239m) that have been logged all over the country during past 10 years are analyzed. The primary objective of this paper are to examnine the ability of a Televiewer to determine the shape of borehole, to present data inferred by stress indicators, to indicate their possible relationship with the anisotropic horizontal stresses. It is shown that in most cases the fracture orientation statistically estimated from observed fractures denotes an excellent correlation with the orientations inferred by stress indicators. Many intervals of breakouts are terminated at the intersection of oblique fracture with the borehole. The results from Televiewer data are further compared with those of hydraulic fracturing techniques.

• Korean Journal of Metals and Materials
• /
• v.49 no.1
• /
• pp.58-63
• /
• 2011

The grain size and growth direction of a directionally solidified turbine blade were evaluated by the initial nucleation condition at the start block of directional solidification. The initial nucleation condition was controlled by inserting a Ni foil on the directional solidification plate of the directional solidification furnace. Fine grains with good orientation were obtained in the faster cooling condition at the start block. The nucleus number was compared with the cooling rate of the start block by electron back scattered diffraction (EBSD). DSC (differential scanning calorimeter) analysis was performed to compare the melting point and undercooling for nucleation of the coarse nuclei and fine nuclei of the start block. The faster cooling condition at the start block showed more undercooling for nucleation and smaller size of nuclei which resulted in a fine grain with good orientation in the directional turbine blade.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.3
• /
• pp.61-68
• /
• 2008

In this paper, we propose a new method to assess fingerprint image quality. In the proposed method, analysis of local variance of image's gray values, local orientation, minutiae density, size and position is applied. Especially by using position information of inputted fingerprint images, partial fingerprint images are filtered and recognition performance is improved. In the experimental results, quality threshold value for improving performance can be decided by analysis of correlation between image quality and recognition rate.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.15 no.3
• /
• pp.253-270
• /
• 2013

This paper concerns the effect of orientation and geometric characteristics of a fracture zone on the tunnel behavior using a numerical investigation. A parametric study was executed on a number of drill and blast tunnelling cases representing different fracture and tunnelling conditions using two and three dimensional finite element analyses. The variables considered include the strike and dip angle of fracture zone relative to the longitudinal tunnel axis, the width and the clearance of the fracture zone, the tunnel depth, and the initial lateral stress coefficient. The results of the analyses were examined in terms of the tunnel deformation including crown settlement, convergence, and invert heave as well as shotcrete lining stresses. The results indicate that the tunnel deformation as well as the shotcrete lining stress are strongly influenced by the orientation of the fracture zone, and that such a trend becomes more pronounced for tunnels with greater depths.

• Journal of Korea Trade
• /
• v.26 no.4
• /
• pp.39-62
• /
• 2022

Purpose - Along with the growing awareness of environmental sustainability, international green entrepreneurship is expected to realize international sustainable development (ISD) by introducing ecological innovation results, using fewer resources consumption, and reducing negative environmental impacts. Building upon contingency theory and social network theory, this paper attempts to explore the role of home country-based networks (technology ties and business ties) as contingent factors that might impact the effectiveness of entrepreneurial orientation (EO) in promoting ISD among green ventures. Design/methodology - Original data were collected from 127 green ventures in China based on the random sampling technique. These green ventures mainly focus on the lower use of energy or materials, lower CO2 emissions, and higher ecological benefits located in the Fujian province, which highlights green economic growth and economic cooperation with international markets. Moderated hierarchical linear regression analysis was conducted to test our hypotheses concerning the main relationship between EO (innovativeness, proactiveness, and risk-taking) and ISD as well as the moderating effects of home country-based networks (technology ties and business ties) on the main relationship. Findings - Empirical results indicate that: first, both innovativeness and proactiveness positively affect ISD; second, both technology ties and business ties at home might significantly strengthen the positive relationship between innovativeness (or proactiveness) and ISD. However, this study did not find significant moderating effects of technology ties or business ties at home on the relationship between risk-taking and ISD. Originality/value - Since previous literature often gives more focus on the host country context of social networks, this study shifts to a home country-based network context. Therefore, our research might enrich the international green entrepreneurship literature by empirically investigating the contingent value of home country-based networks in the relationship between EO and ISD in the context of an emerging economy such as China.

• Korean Journal of Remote Sensing
• /
• v.31 no.2
• /
• pp.183-191
• /
• 2015

If the damage analysis on river-side facilities such as dam, river bank structures and bridges caused by disasters such as typhoon, flood, etc. becomes available, it can be a great help for disaster recovery and decision-making. In this research, We tried to extract a Digital Surface Model (DSM) and analyze the accuracy from Unmanned Air Vehicle (UAV) images on river-side facilities. We tried to apply stereo image-based matching technique, then extracted match results were united with one mosaic DSM. The accuracy was verified compared with a DSM derived from LIDAR data. Overall accuracy was around 3m of absolute and root mean square error. As an analysis result, we confirmed that exterior orientation parameters exerted an influence to DSM accuracy. For more accurate DSM generation, accurate EO parameters are necessary and effective interpolation and post process technique needs to be developed. And the damage analysis simulation with DSM has to be performed in the future.

• International Journal of Automotive Technology
• /
• v.7 no.1
• /
• pp.101-107
• /
• 2006

The force and moment simulation of a steady-state rolling tire taking the effect of tread pattern into account is described using a steady-state transport method with ABAQUS. Tread meshes can not fully consider a tread pattern because detailed tread meshes are not allowed in the steady-state transport method. Therefore, the tread elements are modeled to have orthotropic property instead of isotropic property. The force and moment simulation has been carried out for the cases of both isotropic and orthotropic properties of tread elements. Both cases of simulation results are then compared with the experimental results. It is verified that the orthotropic case is in a better agreement with the experimental result than the isotropic case. Angle effects of tread pattern have been studied by changing the orientation angle of orthotropic property of tread. It is shown that the groove angle in the tread shoulder region has a more effect on force and moment of a tire than that in the tread center region.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.2
• /
• pp.278-285
• /
• 1998

It was known that the C-IC transition in the mixed crystal $(A_{1-x}A^'_x)_2ZnCl_4$ is smeared out with increasing x, which is attributed to the pinning effect of the doped A' ions. In this study, we introduce a new mixed crystal system $K_2Zn_{1-X}Co_XCl_4$, where doped Co ions do not destroy the orientation of the polarization in C phase and preserve the long range ordering of IC phase. We grew a series of mixed crystals $K_2Zn_{1-X}Co_XCl_4$ for x=0, 0.001, 0.005, 0.01, 0.05, 0.1, 0.3, 0.5, 0.7, 1 by the Czochralski method and investigated the real composition of the mixed crystals, structure and the change of the C-IC phase transition with increasing x by the thermal analysis.