• Geophysics and Geophysical Exploration
• /
• v.9 no.1
• /
• pp.50-59
• /
• 2006

The risk of fault reactivation in the Gippsland Basin was calculated using the FAST (Fault Analysis Seal Technology) technique, which determines fault reactivation risk by estimating the increase in pore pressure required to cause reactivation within the present-day stress field. The stress regime in the Gippsland Basin is on the boundary between strike-slip and reverse faulting: maximum horizontal stress $({\sim}\;40.5\;Mpa/km)$ > vertical stress (21 Mpa/km) ${\sim}$ minimum horizontal stress (20 MPa/km). Pore pressure is hydrostatic above the Campanian Volcanics of the Golden Beach Subgroup. The NW-SE maximum horizontal stress orientation $(139^{\circ}N)$ determined herein is broadly consistent with previous estimates, and verifies a NW-SE maximum horizontal stress orientation in the Gippsland Basin. Fault reactivation risk in the Gippsland Basin was calculated using two fault strength scenarios; cohesionless faults $(C=0;{\mu}=0.65)$ and healed faults $(C=5.4;\;{\mu}=0.78)$. The orientations of faults with relatively high and relatively low reactivation potential are almost identical for healed and cohesionless fault strength scenarios. High-angle faults striking NE-SW are unlikely to reactivate in the current stress regime. High-angle faults oriented SSE-NNW and ENE-WSW have the highest fault reactivation risk. Additionally, low-angle faults (thrust faults) striking NE-SW have a relatively high risk of reactivation. The highest reactivation risk for optimally oriented faults corresponds to an estimated pore pressure increase (Delta-P) of 3.8 MPa $({\sim}548\;psi)$ for cohesionless faults and 15.6 MPa $({\sim}2262\;psi)$ for healed faults. The absolute values of pore pressure increase obtained from fault reactivation analysis presented in this paper are subject to large errors because of uncertainties in the geomechanical model (in situ stress and rock strength data). In particular, the maximum horizontal stress magnitude and fault strength data are poorly constrained. Therefore, fault reactivation analysis cannot be used to directly measure the maximum allowable pore pressure increase within a reservoir. We argue that fault reactivation analysis of this type can only be used for assessing the relative risk of fault reactivation and not to determine the maximum allowable pore pressure increase a fault can withstand prior to reactivation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.120-127
• /
• 2016

This study examined the dynamic characteristics of the gate to identify the optimal gate installation direction according to the installation direction. A 1:31 scale model was constructed for a 47.5m prototype gate using acrylic. The scaled weights were tuned by adding lead weights. The first step was to measure the natural frequencies of the model gates, and compare them with finite-element analysis of the prototypes as a calibration. The scaled model was tested in a 1.6 m wide concrete flume for two orientations to determine the effects of the gate orientation on structural vibrations. Vertical vibrations were measured under a range of operational conditions, including a range of bottom opening heights and different upstream and downstream water levels. For large bottom opening heights in the normal direction, relatively large vibrations were induced by vortices shed at the plate bottom that would strike the horizontal truss member. This phenomenon was avoided in the reverse direction. For small bottom opening heights in the normal direction, these vibrations were caused by a suction force that developed at the gate bottom. The gate model in the reverse direction was preferred because of its low overall vibrational response under general gate opening and flow level combinations.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.63.2-63.2
• /
• 2014

As a part of the "Dust, Ice, and Gas In Time" (DIGIT) key program on Herschel, we observed GSS30-IRS1, a Class I protostar located in Ophiuchus (d =125 pc), with Herschel/Photodetector Array Camera and Spectrometer (PACS). More than 70 lines were detected within a wavelength range from 50 ${\mu}m$ to 200 ${\mu}m$: CO lines from J = 14-13 to 41-40, several $H_2O$ lines of Eup = 100 K to 1500 K, 16 transitions of OH rotational lines, and two atomic [O I] lines at 63 and 145 ${\mu}m$. The [C II] line, known as a tracer of externally heated gas by the interstellar radiation field, is also detected at 158 ${\mu}m$. All lines, except [O I] and [C II], are detected only at the central spaxel of $9^{\prime\prime}.4{\times}9^{\prime\prime}.4$. The [O I] emission is extended along a NE-SW orientation, which is consistent with the known outflow direction, while the [C II] line is detected over all spaxels. One possible explanation of the detection of the [C II] line and no correlation of its spatial distribution with any other molecular emission is the existence of the enhanced ISRF nearby GSS30-IRS1. One interesting feature of GSS30-IRS1 is that the continuum emission is extended beyond the point-spread function (PSF), unlike the molecular line emission, indicative of significant external heating. The best-fit continuum model of GSS30-IRS1 with the physical structure including flared disk, envelope, and outflow shows that the internal luminosity is 11 $L_{\odot}$, and the region is also externally heated by a radiation field enhanced by a factor of 25 compared to the local standard interstellar field.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.2
• /
• pp.219-225
• /
• 2014

An automatic combination and assembly system for phone-camera lens modules was developed. The system enables the assembly of the relative orientation of the individual lenses making up the lens module. Conventional assembly systems assemble a lens module from eight assembly units. The developed system reduces this number to half by combining each lens and a spacer into a single assembly unit. Also, the number of transfer stages for sequential assembly is minimized without increasing the assembly time. Therefore, high productivity and a footprint that is only about 25 % of that of a conventional assembly system can be realized. The system features a modular design to allow it to cope with rapid changes in the market. Only a few components, such as the picker and guide, need to be replaced for changing to a new assembly model.

• The Korean Journal of Franchise Management
• /
• v.12 no.2
• /
• pp.35-49
• /
• 2021

Purpose: The major objective of this study is to develop a model for the impact of franchisors' Gapjil (verbal·nonverbal Gapjil, abusing bargaining position, refusing transaction, false or exaggerated information, restrictive practices, unfair damage compensation) on franchisee's recontract intention. We also examine the mediating role of economic satisfaction and social satisfaction in the relationship between franchisors' Gapjil and franchisee's contract intention. Research design, data, and methodology: Data were collected from franchisee owners located nationwide in Korea. Out of 256 questionaires distributed, a total of 256 questionnaires were returned. After excluding 10 invalid respondent questionnaires, we coded and analyzed 246 valid questionnaires (effective response rate of 96.09%) using frequency, confirmatory factor analysis, correlations analysis, and structural equation modeling with SPSS 22.O and SmartPLS 3.0. Results: The findings of this study are summarized as follows: First, among the Gapjil of the franchisors, restrictive practices and unfair damage compensation had negative effects on economic and social satisfaction, but verbal and nonverbal Gapjil for economic and social satisfaction was not significant. Second, abusing bargaining positions and false or exaggerated information had negative effects on social satisfaction, but for economic satisfaction, found to be insignificant. Third, economic and social satisfaction had positive effects on the franchisee's recontract intention to the franchisor. Conclusion: The following implications of this study are as follows. First, the construct of Gapjil that occurs between the franchisors and the franchisees was first presented, and the franchisors' Gapjil is divided into interpersonal Gapjil and structural Gapjil. Second, the Gapjil of the franchisors can be an important predictor variable in maintaining and developing a long-term relationship between the franchisors and the franchisees. Third, solving conflict due to the Gapjil problem between franchisors and franchisees can be an important factor for franchisors and franchisees to co-survive and thrive in Korean franchise system. Fourth, this study suggest that managing the Gapjil of the franchisors was a important antecedent factor in maintaining long-term relationship between the franchisors and the franchisees. Therefore, this study will help franchisors formulate effective symbiotic marketing strategies to satisfy relationships with franchisees and consequently enhance long-term orientation.

• Korean Journal of Social Welfare
• /
• v.55
• /
• pp.131-153
• /
• 2003

This study was aimed at investigating important factors influencing career success among disabled workers. The current researcher scrutinized the degree to which variables and factors affect the career success and occupational turnover rates of the research participants. The participants in this study (n=837) were 374 workers with disabilities and 463 workers without disabilities. The results of this study can be summarized as follows: First, the results of factor analysis showed important categories of conceptual themes of career success. The initial conceptual factor model did not accord with the empirical one. Second, both research participant groups seemed to be influenced by their occupational types. However, all predictive variables excluding the wage rate and the average length of work years had significant impact on job success for the disabled work group, while all the variables excluding the frequency of advice and length of working years had significant impact on job success for the non-disabled worker group. Third, the turnover rate was significantly influenced by the age and the experience of turnover of the research participants. However, the number of co-workers was the strongest predictive variable for the worker group with disabilities, but the occupation choice variable for the worker group without disabilities. Fifth, as a result of verifying the hypothetical path model, it showed that the first model was somewhat proper and could predict the career success on both research participant groups. In conclusion, the following research implications can be suggested. The occupational type of research participants was one of the most important variables to predict the career success for both research participant groups.

• Korean Journal of Remote Sensing
• /
• v.34 no.2_1
• /
• pp.203-211
• /
• 2018

Dam discharge is carried out for the management of rivers and area around rivers due to rainy season or drought. Dam discharge should be based on an accurate understanding of the flow rate that can be accommodated in the river. Therefore, understanding the allowable storage capacity of river is an important factor in the management of the environment around the river. However, the methods using water level meters and images, which are currently used to determine the allowable flow rate of rivers, show limitations in terms of accuracy and efficiency. In order to solve these problems, this paper proposes a method to automatically calculate the allowable storage capacity of river based on the images taken by drone. In the first step, we create a 3D model of the river by using the drone images. This generation process consists of tiepoint extraction, image orientation, and image matching. In the second step, the allowable storage capacity is calculated by cross section analysis of the river using the generated river 3D model and the road and river layers in the target area. In this step, we determine the maximum water level of the river, extract the cross-sectional profile along the river, and use the 3D model to calculate the allowable storage capacity for the area. To prove our method, we used Bukhan river's data and as a result, the allowable storage volume was automatically extracted. It is expected that the proposed method will be useful for real - time management of rivers and surrounding areas and 3D models using drone.

• Journal of Distribution Science
• /
• v.14 no.6
• /
• pp.53-63
• /
• 2016

Purpose - This study examines the effects of the influence strategies on sales representative and headquarter trust, and investigates how sales representative trust plays a mediating role in the relationship between influence strategies and headquarter trust. For these purposes, a structural model which consists of several constructs was developed. In this model, influence strategies that consist of relational influence strategies (information exchange, recommend, promise) and mandatory influence strategies (legal plea, request, threat) were proposed to affect the sales representative trust and in turn, increase the headquarter trust. Thus, this study proposed that sale representative trust plays a core mediating role in the relationship between relational and mandatory influence strategies and headquarter trust in B2B food materials distribution context. Research design, data, and methodology - For these purposes, the authors collected the data from 208 B2B specialized complex agents. We used the 2,200 B2B specialized complex agents which trade with CJ, Ottogi, and Daesang firms and supply food materials to restaurant, school cafeteria, supermarket and traditional market as a sample frame. Once we identified 330 B2B specialized complex agent owners, CEOs, and/or Directors who had agreed to participate in this study, we dropped off a questionnaire at each B2B specialized complex agent and explained the purpose of this study. The survey was conducted from October 1, 2015 to December 15, 2015. A total of 230 questionnaires were collected. Of these collected questionnaires, 28 questionnaires excluded since they had not been fully completed. The data were analyzed using frequency test, reliability test, measurement model analysis, and structural equation modeling with SPSS and SmartPLS 2. Results - First, information exchange, recommendation, and promise of relational influence strategies had positive effects on sales representative trust. The threat of mandatory influence strategies had a negative effect on sales representative trust, but legal plea and request did not have a significant effect on sales representative trust. Second, information exchange and recommendation of relational influence strategies had positive effects on headquarter trust, but promise did not. Also, legal plea, request, and threat of mandatory influence strategies did not have a significant effect on headquarter trust. Third, this findings show that sales representative trust plays a partial mediator between information exchange and headquarter trust, and threat and headquarter trust, and a full mediator between promise and headquarter trust, and recommendation and headquarter trust. Conclusions - The aim of this study was to examine the effects how diverse dimensions of relational and mandatory influence strategies relate to sales representative trust and headquarter trust. To do so, we integrated the influence strategies and the trust transfer theory to hypothesize that various influence strategies increase sales representative and headquarter trust. The findings of this study suggest that headquarter firms should establish and enforce proper influence strategies guidelines to make clear what proper actions sales representatives should implement in relationship with B2B specialized complex agents. Also, relational and mandatory influence strategies must be regarded as a long-term and ongoing strategy that eventually build a long-term orientation with B2B specialized complex agents and guarantee a company's sustainable growth and success.

• Geophysics and Geophysical Exploration
• /
• v.11 no.1
• /
• pp.68-77
• /
• 2008

We have developed an inversion algorithm for loop-loop electromagnetic (EM) data, based on the localised non-linear or extended Born approximation to the solution of the 2.5D integral equation describing an EM scattering problem. Source and receiver configuration may be horizontal co-planar (HCP) or vertical co-planar (VCP). Both multi-frequency and multi-separation data can be incorporated. Our inversion code runs on a PC platform without heavy computational load. For the sake of stable and high-resolution performance of the inversion, we implemented an algorithm determining an optimum spatially varying Lagrangian multiplier as a function of sensitivity distribution, through parameter resolution matrix and Backus-Gilbert spread function analysis. Considering that the different source-receiver orientation characteristics cause inconsistent sensitivities to the resistivity structure in simultaneous inversion of HCP and VCP data, which affects the stability and resolution of the inversion result, we adapted a weighting scheme based on the variances of misfits between the measured and calculated datasets. The accuracy of the modelling code that we have developed has been proven over the frequency, conductivity, and geometric ranges typically used in a loop-loop EM system through comparison with 2.5D finite-element modelling results. We first applied the inversion to synthetic data, from a model with resistive as well as conductive inhomogeneities embedded in a homogeneous half-space, to validate its performance. Applying the inversion to field data and comparing the result with that of dc resistivity data, we conclude that the newly developed algorithm provides a reasonable image of the subsurface.

• Journal of Distribution Research
• /
• v.13 no.4
• /
• pp.71-95
• /
• 2008

Transaction between industrial suppliers and their buyers in business markets increasingly take place in the form of long-tenn business relationships. These relationships are governed through formal or informal agreements. Dynamic business markets are also forcing B2B marketers to create flexibility in their firms. However, buyers are bound in their rationality and find it impossible to contemplate all possible future contingencies. The more formal and detailed the contracts they conclude, the likelier it becomes that at least one buyer is going to perceive a need to adjust the initial agreement as environmental events unfold. In this case, the actor relies upon industrial supplier's competence. Our study purpose is to examine the consequences of supplier's competence on the industrial customer-supplier long-tenn relationship. Antecedent variables of supplier competence include R&D, flexibility, brand asset, market sensing, and customer support service. We presented a comprehensive constructive model consisting of components of supplier's competence and the antecedent factors. Research hypotheses were developed and data were gathered from respondents who work in the cosmetics industry. The results discussed here represent a first step towards a better understanding of the role of supplier competence in the B-to-B cosmetics industry. Managerial implications and the limitations of this research were also discussed.