We have investigated the effects of deposition angle on structural and magnetic properties of e-beam evaporated ${(4-{\AA}\;Co/9.2-{\AA}\;Pt)}_{23}$ multilayer thin films prepared on tilted substrates. It was found that the [111] crystallographic orientations of the multilayer thin films were not aligned with colummar growth orientations and they were remained to be normal to the substrate planes even though the deposition angle was severely oblique up to $60^{\circ}$. The analysis of the torque curve reveal that the intrinsic anisotropy energy was monotonically decreased with the deposition angle but the easy axis orientation parallel to the substrate normal was not much influenced by deposition angle.
We studied the microstructure and magnetic property of the pulsed DC magnetron sputtered $Zn_{\0.8}Co_{0.2}O$ film as a function of substrate temperatures. The X-ray patterns of the $Zn_{\0.8}Co_{0.2}O$ film showed a strong (002) preferential orientation at $500^{\circ}C$. The films with a crystallite size of 23-35 nm were grown in the form of nano-sized structure and this tendency was remarkable with increasing substrate temperature. The UV-visible result showed that the $Zn_{\0.8}Co_{0.2}O$ film prepared above $300^{\circ}C$ has a high optical transmittance of over $80\%$ in the visible region. The absorption bands were observed due to sp-d interchange action by $Co^{2+}$ complex ion and dd transition in the region from 500 to 700nm. The resistivity of the film was below $10^{-1}\;\Omega-cm\;above\;300^{\circ}C$. The AGM analysis results for the all films showed the magnetic hysteresis curves of ferromagnetic nature. The low electrical resistivity and room temperature ferromagnetism of ZnCoO thin films 'deposited above $300^{\circ}C$ suggested the possibility for the application to Diluted Magnetic Semiconductors (DMSs).
The grain size and growth direction of a directionally solidified turbine blade were evaluated by the initial nucleation condition at the start block of directional solidification. The initial nucleation condition was controlled by inserting a Ni foil on the directional solidification plate of the directional solidification furnace. Fine grains with good orientation were obtained in the faster cooling condition at the start block. The nucleus number was compared with the cooling rate of the start block by electron back scattered diffraction (EBSD). DSC (differential scanning calorimeter) analysis was performed to compare the melting point and undercooling for nucleation of the coarse nuclei and fine nuclei of the start block. The faster cooling condition at the start block showed more undercooling for nucleation and smaller size of nuclei which resulted in a fine grain with good orientation in the directional turbine blade.
Objectives: In this study, dental hygienists' perceptions of dental hygienists' communication and general public's mutual perceptions were compared to seek development directions and plans for improving dental hygienists' communication skills, and furthermore, communication to increase satisfaction between the general public and dental hygienists. This study was conducted to provide basic data on the development and direction of competency improvement education. Methods: From April 1 to April 31, 2023, a survey was conducted through an online link for the general public with dental treatment experience and dental hygienists currently working at dentists in Gwangju and Jeonnam. A total of 258 questionnaires were collected. Independence t-test and paired t-test were performed using SPSS Statistics (ver. 21.0; IBM Corp., Armonk, NY, USA) Results: As a result of analyzing the accuracy of the communication ability of dental hygienists, from the dental hygienist's point of view, general publics perceived that the dental hygienist's underestimation of their own communication ability was actually lower than the dental hygienist's underestimated communication ability. From the general public's point of view, dental hygienists overestimated their communication ability. In fact, dental hygienists perceived their general publics as higher than general public's overestimated communication ability. Conclusions: Based on these results, it is necessary to develop education and operate various educational programs to improve the communication skills of dental hygienists, and to rethink educational accessibility to increase participation in education and to publicize the professionalism of dental hygienists.
단섬유 강화 고분자의 사출성형시 고분자 수지의 유동에 의하여 섬유배향이 필연적으로 일어나며, 섬유배향에 의한 이방성 (anisotropy)은 최종성형물의 품질과 기계적인 특성 등에 많은 영향을 미친다. 사출공정 중에서 충전과정(filling stage)은 섬유배향에 지배적인 역할을 하므로, 충전과정의 유동장을 정확하게 해석하는 것은 매우 중요하다. 형상이 복잡한 캐비티(cavity)와 다중 캐비티에서는 먼저 충전이 완료되어 현탁액(suspension)이 압축을 받고 있는 영역들이 존재하게 된다. 기존의 방법처럼 사출성형의 충전과정을 비압축성 유동으로 가정하면 정확한 유동장을 계산할 수 없다. 본 연구에서는 충전과정에서 압축성을 고려한 혼합 유한요소법/유한차분법을 이용하여 유동장을 계산하였다. 충전이 완료되는 순간에서, 이차배향텐서에 대한 배향변화방정식을 4차 Runge-Kutta 방법을 이용하여 해석함으로써 3차원 섬유배향장을 예측하였다. 충전시간이 다른 4개의 캐비티를 갖는 금형을 제작하여 충전과정에서 압축성 효과를 고려한 수치해석 결과가 실험과 잘 일치함을 보였다. 또한, 압축성과 비압축성 유동장에서 이론적으로 계산된 섬유배향의 차이를 정성적 및 정량적으로 비교하였다.
최근 디지털 항공사진측량 분야에서 Direct Georeferencing 활용이 일반화되었으며, 이때 항공사진의 외부표정요소를 정확히 산출하기 위해 Boresight 검정이 필수적이다. 이 과정에서 높이에 대한 기준인 지오이드 모델을 사용하게 되는데, 지오이드 모델에 따라 Boresight 검정 결과가 다르게 나타날 수 있다. 본 연구에서는 Direct Georeferencing을 통한 외부표정요소 산출에 있어서 Boresight 검정시 지오이드 모델에 따라 그 값에 차이가 발생할 수 있음을 인지하고, 지오이드 모델이 Boresight 검정에 어떤 영향을 미치는지 세 가지 경우로 구분하여 실험하였다. 실험에 사용된 지오이드 모델은 EGM96, EGM08, KNGeoid14이며, 이에 따라 Boresight 검정을 통해 Datum Shift, Boresight Angle을 계산하였다. 또한 각각의 경우를 적용해 외부표정요소 산출 후 DPW(Digital Photogrammetry Worktation)를 이용해 지상기준점을 확인하였다. 본 연구를 통해 지오이드 모델에 따른 Boresight 검정 결과 Datum Shift에서 Z에서 차이가 있었으며, 외부표정요소에서 높이 Z와 회전량 Ω, Φ에서 차이를 보였다. 각각의 경우에서 수치도화기를 이용해 지상기준점과 비교한 결과 지오이드 모델에 따른 관측정확도의 차이는 3cm 내외로, 지오이드 모델이 Boresight 검정에 큰 영향을 미치지 않음을 알 수 있었다.
High-speed melt spinning of syndiotactic polystyrene was carried out using high and low molecular weight polymers, HM s-PS and LM s-PS, at the throughput rates of 3 and 6 g/min. The effect of take-up velocity on the structure and properties of as-spun fibers was investigated. Wide angle X-ray diffraction (WAXD) patterns of the as-spun fibers revealed that the orientation-induced crystallization started to occur at the take-up velocities of 2-3 km/min. The crystal modification was a-form. Birefringence of as-spun fibers showed negative value, and the absolute value of birefringence increased with an increase in the take-up velocity. The cold crystallization temperature analyzed through the differential scanning calorimetry (OSC) decreased with an increase in the take-up velocity in the low speed region, whereas as the melting temperature increased after the on-set of orientation-induced crystallization. It was found that the fiber structure development proceeded from lower take-up velocities when the spinning conditions of higher molecular weight and lower throughput rate were adopted. The highest tensile modulus of 6.5 GPa was obtained for the fibers prepared at the spinning conditions of LM s-PS, 6 g/min and 5 km/min, whereas the highest tensile strength of 160 MPa was obtained for the HM s-PS fibers at the take-up velocity of 2 km/min. Elongation at break of as-spun fibers showed an abrupt increase, which was regarded as the brittle-ductile transition, in the low speed region, and subsequently decreased with an increase in the take-up velocity. There was a universal relation between the thermal and mechanical properties of as-spun fibers and the birefringence of as-spun fibers when the fibers were still amorphous. The orientation-induced crystallization was found to start when the birefringence reached -0.02. After the starting of the orientation-induced crystallization, thermal and mechanical properties of as-spun fibers with similar level of birefringence varied significantly depending on the processing conditions.
본 논문에서는 모바일 카메라를 이용한 지문인식 시스템 개발에서 지문영역 추출 및 융선 방향 정보 추출 방법에 대해 제안한다. 모바일 카메라로 획득한 지문영상은 기존의 지문센서(접촉식 센서)로 획득한 영상과 여러 가지 다른 특성을 나타낸다. 우선 모바일 카메라로 획득한 지문영상은 칼라영상이며, 배경영역이 획득 장소와 시간에 따라 변화가 심하고, 지문 융선과 골의 조도차가 접촉식 센서에서 획득한 영상보다 작아 노이즈에 대한 영향이 크다는 특징이 있다. 이러한 환경에서 지문영역을 추출하고자 손가락의 색 정보와 지문의 주파수 정보를 이용하여 초기영역을 설정하고 설정된 초기영역을 이용하여 영역확장 방법으로 지문영역을 추출하였다. 손가락의 색 정보는 학습과정을 통해 손가락 색의 확률 분포를 LUT (Look Up Table)기법을 이용해 모델하였고, 주파수 정보는 초점이 맞는 손가락 영역과 초점이 맞지 않는 배경영역의 영상 주파수 특성 차이를 이용하였다. 지문 방향 정보 추출에서는 카메라로부터 발생하는 노이즈나 극단치 (outlier)의 영향을 줄이기 위해 그래디언트 필드에서 초기 방향을 기준으로 노이즈와 극단치를 제거한 후 방향을 구하는 방법을 사용하였다. 실험에서는 모바일 카메라를 이용하여 획득한 지문영상으로 지문영역 추출 및 융선방향 정보 추출에 대한 평가를 했다. 지문영역 추출 알고리즘 평가를 위해 600장의 수동 구분된 지문영상을 사용하였고 융선방향 정보 추출은 지문 인식성능으로 비교 평가 하였다.
현장 지표지질조사 수행 전에 지질구조를 사전 파악하기 위해 일반적으로 항공사진과 위성영상자료가 이용되는데, 이는 사전 및 시 공 중 현장 조사의 효율을 극대화하기 위한 방안이다. 화성암, 퇴적암 및 변성암이 인접하여 노출되는 안동지역의 항공사진에서 추출한 847개 선구조선의 방향성과 현장 지표지질조사에서 측정한 1,940개 불연속면의 방향성을 분석한 결과, 방위는 어느 정도 상관성을 보이나, 선구조선의 방향성은 암반의 종류와 불연속면의 종류에 따라 다른 양상을 나타낸다. 즉, 지표지질조사에서의 불연속면은 항공사진에서 선구조선으로 판독되지 않는 것들도 존재하기 때문에 암반의 종류와 불연속면의 종류별 선구조선의 방향 분석이 요구된다. 따라서 불연속면의 영향을 크게 받는 터널, 사면 등 지반구조물의 합리적인 건설을 위하여서는 항공사진 분석과 동시에 현장 지표지질조사에서 암반의 종류 및 불연속면의 종류에 따른 불연속면의 방향성 측정이 필요하다.
본 연구에서는 파쇄대의 공간적 분포 특성이 터널의 거동에 미치는 영향에 대한 내용을 다루었다. 이를 위해 발파굴착 공법이 적용되는 터널을 대상으로 다양한 파쇄대 조건을 도출하고 이에 대한 2차원 및 3차원 해석을 수행하여 파쇄대의 주향 및 경사, 터널과의 이격거리, 토피고, 측압계수 등에 대한 매개변수 연구를 실시하였다. 해석결과를 토대로 매개변수 조건에 대한 터널 변위 및 지보재 부재력의 변화경향을 고찰하였으며 그 결과 파쇄대의 경사각 및 주향에 따라 터널의 변위 및 지보재 부재력에서 큰 차이를 보였으며 전반적으로 터널의 심도가 깊어질수록 그리고 초기측압계수가 클수록 파쇄대의 공간적 분포 특성에 따른 터널 거동의 차이가 더 심화되는 것으로 나타나 대심도 터널의 경우가 저심도 터널에 비해 파쇄대의 영향이 가중될 수 있는 것으로 검토되었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.