• 청정기술
• /
• 제26권3호
• /
• pp.211-220
• /
• 2020

본 연구는 80 kW급 단일버너 연소로에서 석탄 연소시 초저 NOx 버너 설계인자를 평가하기 위한 실험적 연구이다. 버너 설계 인자인 선회강도, 총 과잉 공기비, 버너 영역 과잉공기비, 1차/2차 산화제 비율, OFA 비율을 변경하여 총 81개 조건을 대상으로 실험을 수행 하였다. 실험 결과, 선회류가 약하면 연소로 출구에서 CO가 증가하고 연소로 내부 온도가 감소하는 것으로 나타났다. 그러나, 선회류가 강하면 NOx가 증가하기 때문에 적절한 선회류 강도를 결정하는 것은 NOx를 줄이는 데 중요한 요소이다. 1차/2차 산화제의 비율 또한 중요한 요소이며, 생성 된 NOx의 양은 산화제의 비율에 따라 달라진다. 2차 산화제의 비율이 증가하면 연소 초기에 NOx 방출량이 증가하고, 측정 된 배출구 NOx가 증가하게 된다. 그러나, 2차 산화제 비율이 감소하면 화염이 길어지고 CO가 증가한다. 본 연구에 사용 된 연소 시스템은 적절한 조건이 만족 될 때 O₂ 6%를 기준으로 최소 NOx가 82 ppm 생성되는 것으로 확인 되었다. 본 실험에서 대상으로 한 버너는 연소용 공기를 석탄을 이송하는 1차공기 외에 2차공기로 하나의 산화제 유동만 사용하는 방식으로서 추후 3차 및 4차공기로 분할하여 화염형태 및 반응을 세밀하게 제어할 경우 추가적인 NOx 감소가 가능할 것으로 예상된다.

• 한국안전학회지
• /
• 제24권1호
• /
• pp.21-25
• /
• 2009

Extinguishing limits of laminar ethylene/oxygen flames in both normal and inverse co-flow jet burner have been determined experimentally and computationally. An inert gas($N_2$, Ar, $CO_2$) was added into the oxidizer to find the critical concentration and the effectiveness of the agents on flame extinction. The experimental results showed that the physical aspect of inert gases was main mechanism for flame blow-out as same as cup burner test, but the flow effect should be considered to determine the extinction concentration. The numerical prediction was performed with modified WSR model and the result was in good agreement with the measurements. The experimental and numerical methods could be used for the assessment of various flame suppression agents such as minimum extinguishing concentration.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1751-1755
• /
• 2004

Increasing environmental pressures to reduce NOx emission are being placed on coal-fired boilers. To meet the environmental requirements, Doosan Heavy Industries & Construction Co., Ltd.(Doosan) has developed low NOx pulverized coal burner. Low NOx pulverized coal burner has already delivered, and it's combustion performance was evaluated to the NOx and Unburned Carbon(UBC) during the commissioning tests. The test results are shown that the strong relationship is existed between NOx and OFA flow rate, and also fuel-N fraction of coal has effected on NOx emission.

• 한국수소및신에너지학회논문집
• /
• 제29권5호
• /
• pp.512-522
• /
• 2018

This study was conducted to investigate on the combustion characteristic with the effects of mat thickness and fuel kinds in a metal-fiber burner. The mode transition point is confirmed by the K value, which was defined as the rate of flow velocity and laminar burning velocity. The ($T^4_{sur}-T^4_{\infty}$) is highest at methane flame with 3 T thickness. Through the measurement of the unburned mixture temperature, the possibility of submerged flame in surface combustion burner was confirmed. The rapid emission of CO occurs nearby limit blow out (LBO) because of the increase of flow velocity. In case of NOx, the trend is similar with surface temperature. However, it also considered that the NOx emission is affected by residence time with flame position.

• 한국연소학회지
• /
• 제7권2호
• /
• pp.34-41
• /
• 2002

To investigate the combustion characteristics of a swirling diffusion gas burner with oxygen enrichment, mean temperature, CO, $CO_2$, and HC concentrations were measured at various oxygen enrichment conditions. According to the results, the flame temperature increased and the region of high temperature was expanded with increasing oxygen concentration. The $CO_2$ concentrations increased, while the CO concentrations decreased in proportion to the increase of oxygen concentration. On the other hand, the HC concentrations were decreased and this tendency was very strong at the downstream of the combustor.

• 대한기계학회논문집B
• /
• 제27권4호
• /
• pp.447-457
• /
• 2003

An experiment in a turbulent non-premixed flat flame was carried out in order to investigate the effect of swirl number on the flow and combustion characteristics. First. stream lines and velocity distribution in the flow field were obtained using PIV method. In contrast with the axial flow without swirl, highly swirled air induced stream lines along the burner tile. and backward flow was caused by recirculation in the center zone of the flow field. In the combustion. the flame with swirled air also became flat and stable along the burner tile with increment of the swirl number. Flame structure by measuring OH and CH radicals intensity and by calculating Damkohler number(Da) and turbulence Reynolds number(Re$_{T}$) was examined. It appeared to be comprised in the wrinkled laminar-flame regime. Backward flow by recirculation of the burned gas decreased the flame temperature and emissions concentrations as NO and CO. Consequently, the stable flat flame with low NO concentration was achieved.d.

• 한국가스학회지
• /
• 제11권1호
• /
• pp.1-8
• /
• 2007

본 논문에서는 메탈화이버를 이용한 난류예혼합 플랫버너를 제작하여 다양한 연소조건하에서 화염의 안정화범위를 확인하였으며, 연료유량과 공기유량의 변화에 따른 균일가열 능력과 배기가스 특성에 관한 실험을 실시하였다. 그리고 화염의 안정성 평가를 위한 실험을 통해 화염을 공기유량 변화에 따라 청녹염, 복사염, 청염 영역으로 나눌 수 있었고, 이들 영역은 청염>복사염>청녹염 영역 순으로 연소상태가 양호하였다. 공기비에 따른 영향을 살펴보면, 본 실험에서는 연료유량 1과 4l/min에서는 공기비 ${\alpha}=1.5$가 적합하였으며 연료유량 2l/min에서는 ${\alpha}=2.0$이 적합한 것으로 나타났다. 한편 연료유량과 관계없이 공기비 ${\alpha}=1.3{\sim}2.1$범위에서는 연소소음이 발생했다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1998년도 제17회 KOSCI SYMPOSIUM 논문집
• /
• pp.47-57
• /
• 1998

Characteristics of evaporation, flame propagation at moment of ignition and steady state combustion, and flow characteristics of combustible mixture have been investigated by experiments and computational simulation for the evaporation pot type kerosene burner. The results show how to design the evaporation pot in order to minimize the sticking of residual tar, and also indicate that symmetrical flame propagation along the flame ring from the kernel of ignition is achieved by modication of the shape of ignition part. In the case of steady state combustion, the uniform distribustion of flame at each flame hole is accomplished by proper modification of the piping instruments. The improved design of the structure and parts of the kerosene burner make up enhancement of flame stability and considerable reduction of CO and bad smell emission at moment of ignition.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.485-490
• /
• 2004

Sawtooth mixing device used in a non-premixed burner is evaluated for flame stabilization and NO$_{x}$ reduction. Three mixers with different blade angles are tested. Methane is delivered through the fuel jet and air passes through the co-flow annulus. The flame mode changes (attached flame, lifted flame and extinction) against the fuel flow speed are measured, and the stability diagram is drawn. Moreover, by traversing thermocouple and sampling probe in the flame, the distribution of temperature and NO$_{x}$ mole fraction are measured. With the change in blade angle, flame shape, flame stabilization, the distribution of temperature and NO$_{x}$ mole fraction are changed considerably.rably.

• 한국대기환경학회지
• /
• 제12권5호
• /
• pp.577-585
• /
• 1996

A screening study was performed in order to resolve the flow, combustion and emission characteristics of the gas furmace with co-axial diffusion flane burner. A control-valume based finite-difference method with the power-law scheme was employed for discretization. Numerical procedure for the differential equation was used by SIMPLEST to enclosute rapid converge. A k-.varepsilon. model was incorporated for the closure of turbulence. The mass fraction and mixture fraction were calculated by cinserved scalar method. An equilibrium analysis was employed to determine the concentration of radicals in the product stream and conserbation equations were them solved for N amd NO by Zelovich reaction scheme. The method was exercised in a simple one-dimensional case first, to determine the effects of air ratio, temperature and residence time on NO formation and applied to a furnace with co-axial diffusion flame burner.