• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.472-475
• /
• 2005

This paper present a robot controller developed for shipbuilding yard. Since shipbuilding process handles large work pieces and has dusty and noisy environment, the developed controller has separated architecture into main control part and servo control part. Main control part is located in control room while servo control part is located near robot with work pieces. Commutation between two parts is done through SynqNet and RS485. Air purging system is adapted to servo control part for better reliability. We aimed open architecture in both hardware and software architecture. For open hardware architecture, we employed Compact PCI (cPCI) because it is widely used bus system and very reliable. Since lots of commercial boards are available with cPCI interface, upgrade and reconfiguration is easy. For open software architecture, Windows XP�� Embedded is selected as operating system (OS), because it is very popular OS and most hardware vender supports device driver for the windows XP.

• Asian Journal of Innovation and Policy
• /
• 제8권1호
• /
• pp.73-96
• /
• 2019

This study suggests a new approach for identifying core robot tech-nologies based on technological cross-impact. Specifically, the approach applies data mining techniques and multi-criteria decision-making methods to the co-classification information of registered patents on the robots. First, a cross-impact matrix is constructed with the confidence values by applying association rule mining (ARM) to the co-classification information of patents. Analytic network process (ANP) is applied to the co-classification frequency matrix for deriving weights of each robot technology. Then, a technique for order performance by similarity to ideal solution (TOPSIS) is employed to the derived cross-impact matrix and weights for identifying core robot technologies from the overall cross-impact perspective. It is expected that the proposed approach could help robot technology managers to formulate strategy and policy for technology planning of robot area.

• 한국항행학회논문지
• /
• 제21권1호
• /
• pp.132-137
• /
• 2017

본 논문에서는 로봇의 구조나 보행 상황을 반영해 하나의 보행 패턴을 다른 보행 패턴으로 변환하게 해주는 영모멘트 점 (ZMP; zero moment point)와 질량 중심 (CoM; center of mass)의 실시간 변환 방법을 제안한다. 일반적으로 휴머노이드 로봇은 높이와 질량과 같은 자체적인 구조 특성을 가지고 있다. 이러한 구조적 특성으로 인해 인간 또는 휴머노이드 로봇으로부터 측정되거나 생성되어진 CoM / ZMP 보행 패턴을 다른 로봇에 직접 적용하는 것은 어렵다. 이를 위하여 간단한 휴머노이드 로봇 모델인 cart-table model을 사용해 보폭의 길이, 보행 시간, CoM 높이 변화에 따라 보행 패턴의 특성을 분석한다. 그러한 분석으로부터 변환 방정식을 유도하고 시뮬레이션을 통해 제안된 방법을 검증한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.491-493
• /
• 2007

This paper is suggesting the method to embody Multi-Axes robot controller by using CAN which has been the most popular industrial networks. The robot controller guarantees the efficiency and reliability by using CAN as a communication tool between upper robot control parts and lower control parts.

• 한국산업융합학회 논문집
• /
• 제25권5호
• /
• pp.853-859
• /
• 2022

In this study, we analyzed the instantaneous trajectory generation capability and target arrival rate of a mobile robot by changing the parameter of the TEB (Timed Elastic Band) Local Planner among local planners that affect the instantaneous obstacle avoidance ability of the mobile robot using ROS (Robot Operating System) simulation and real experience. As a result, we can expect a decrease in the target arrival time of the mobile robot through a decrease in the parameter values of the TEB Local Planner's min_obstacle_dist, inflation_dist, and penalty_epsilon. However, if this parameter is reduced too much, the risk of obstacle collision of the moving robot is increases, so it is important to combine the appropriate values to construct the parameter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.376-379
• /
• 1993

GoldStar Industrial Systems Co. R & D center successfully developed the inverter for welding under the support of GoldStar Electric Machinery Co. Now, we are currently working on the mechanical part of articulated robot and a high-performance general purpose motion controller. By combining the above three items, we will be able to constitute the complete welding robot system on our own. In this article. the welding robot system currently under developing is introduced. The main focus will be placed on the development of general purpose motion controller with welding control module. Therefore, the architecture of welding robot controller where the general purpose motion controller is combined with the welding controller module will be explained. Here, the software system will be explained with regard to the hardware system.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제2권3호
• /
• pp.185-190
• /
• 2002

In distributed autonomous robotic systems (DARS), each robot must behave by itself according to its states ad environments, and if necessary, must cooperate with other robots in order to carry out their given tasks. Its most significant merit is that they determine their behavior independently, and cooperate with other robots in order to perform the given tasks. Especially, in DARS, it is essential for each robot to have evolution ability in order to increase the performance of system. In this paper, a schema co-evolutionary algorithm is proposed for the evolution of collective autonomous mobile robots. Each robot exchanges the information, chromosome used in this algorithm, through communication with other robots. Each robot diffuses its chromosome to two or more robots, receives other robot's chromosome and creates new species. Therefore if one robot receives another robot's chromosome, the robot creates new chromosome. We verify the effectiveness of the proposed algorithm by applying it to cooperative search problem.

• 한국산업융합학회 논문집
• /
• 제19권2호
• /
• pp.69-74
• /
• 2016

This study proposes a new approach to design of the robust control application of a mobile manipulator with dual-arm. The mobil manipulator robot system consists of 12 DOF manipulators and a mobile robot. Kinematics of the robotics has been analyzed and simulated to verify reliability. A position-based torque control technique is applied to the robot by adding an outer loop to interact with the environment. Experimental studies of torque control applications of robot arm and interaction with a user operator are conducted. Experimental results has been proved that the robot arm performed regulated to follow the desired reference.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2007년도 특별논문집
• /
• pp.43-47
• /
• 2007

In this paper, we will introduce how we utilize 3D design model information at factory automation field with welding robot OLP system which is in using at out shipyard. At this area, so far, most of design information is used in NC data generation for steel cutting, but we can utilize 3D model information at more wide and complex area likes robot welding. Moreover, OpenGL which is a graphic library can be possible to verify robot NC data is correct or not through 3D simulation even if some one is not a expert at robot handling.

• 한국산업융합학회 논문집
• /
• 제18권1호
• /
• pp.10-17
• /
• 2015

We describe a research about remote control of mobile robot based on voice command in this paper. Through real-time remote control and wireless network capabilities of an unmanned remote-control experiments and Home Security / exercise with an unmanned robot, remote control and voice recognition and voice transmission are possible to transmit on a PC using a microphone to control a robot to pinpoint of the source. Speech recognition can be controlled robot by using a remote control. In this research, speech recognition speed and direction of self-driving robot were controlled by a wireless remote control in order to verify the performance of mobile robot with two drives.