• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.541-545
• /
• 2003

Mn-Zn 페라이트의 자심재료가 전자기 부품용 응용될 때, 소형화와 고효율화를 이루기 위한 공정변수에 따른 전자기적 특성변화를 고찰하였다. ZnO 의 몰비가 11 mole일 때, 가장 우수한 특성을 나타내었으며, $SiO_2$와 CaO는 입계 저항층 형성을 통한 손실을 감소시키고, 이로 인해 성능지수는 증가하여 $100\;kHz\;{\sim}\;200\;kHz$ 범위에서 최대값을 나타내어 전자기적 효율이 극대화되었다. 산소분압의 제어는 승온과정부터 산소분압을 제어시켜주어야만 Zn-loss 현상의 증가와 $Fe^{2+}$ 이온 농도의 감소 및 $Fe^{2+}-\;Fe^{3+}$ 이온간의 호핑(hoping)현상 등에 의한 손실을 최소화할 수 있으며, 높은 투자율을 얻을 수 있었다. 그리고 소결 또는 냉각 중 평형 산소분압이 유지되지 못하면 다량의 결함이 출현하게 되고, 특히 $600^{\circ}C$ 이하에서 스피넬 상의 분해-산화반응이 일어나면서 미세구조 상에 결함으로 남게 되어 전자기적 특성이 저하되었다.

• Journal of the Korean Society for Heat Treatment
• /
• v.10 no.2
• /
• pp.101-108
• /
• 1997

In high carbon steels, the cementite phase is more unstable thermally than graphite, and it can lead to a marked deterioration in the formability. Many studies have been carried out to evaluate the effect of the fundamental elements on the graphitization of cementite in high carbon steels. In this present work, the effect of Mn, Cr addition on graphitization in Fe-0.65%C-1.0%Si steel has been investigated by means of hardness testing, optical microscopy and EPMA. The nucleation of graphite may mostly depend on the dissolution rate of cementite into ferrite and the number of the nucleation sites of graphite. The graphitization was promoted by the addition of 0.1%Mn in high carbon steel, but retarded by more addition than 0.5% of Mn. By the more addition of Cr than 0.1%, the graphitization of high carbon steel was strongly retarded. Because Mn was moderate anti-graphitizer, but Cr was stroug anti-graphitizer.

• Journal of the Korean Ceramic Society
• /
• v.42 no.11 s.282
• /
• pp.758-762
• /
• 2005

Gas valve for domestic use is used for flow control of LPG (Liquefied Petroleum Gas) or LNG (Liquefied Natural Gas) of which pressure is about $200\;mmH_{2}O(\fallingdotseq0.0196\;[bar])$. Currently, two kinds of valves such as rotary type and button type are widely used in many applications. But, these valves have some problems that they are not controllable and reliable. Piezo actuation combined with modem microelectronics provides a reliable, quiet, low energy, infinitely adjustable gas valve. In this paper, gas valve using piezo actuator which are bimorph and a circle type was studied. Also, Prototype for gas valve was manufactured and characteristics of the prototype gas valve were analyzed.

• Electrical & Electronic Materials
• /
• v.5 no.3
• /
• pp.329-336
• /
• 1992

본 논문은 이방성 Sr.페라이트의 자기특성의 개선에 관하여 연구한 것이다. 시편은 SrO.nFe$_{2}$O$_{3}$의 기본조성으로서 비화학양론적 영역인 n=5.9를 택하였다. 그리고 보자력을 증가시키기 위하여 기본첨가제로서 0.7wt% CaCO$_{3}$와 0.3% wt% SiO$_{2}$를 첨가하여 하소시킨 다음 $Na_{2}$SiO$_{3}$의 량을 변화시키면서 복합첨가하였다. 한편, 위의 시료(기본첨가제와 0.5wt% $Na_{2}$SiO$_{3}$)에 Cr$_{2}$O$_{3}$ 및 $Al_{2}$O$_{3}$를 단독 및 복합첨가한 결과, 0.5wt% $Al_{2}$O$_{3}$가 단독첨가되었을 경우, 좋은 자기특성을 나타내었다. 본 연구에서 시행한 복합첨가방식에 의한 Sr.페라이트의 자기특성의 조사를 통하여 등방성의 경우, 기본조성과 기본첨가제와 0.5wt% $Na_{2}$SiO$_{3}$와 0.5wt% $Al_{2}$O$_{3}$조성에서 (BH)$_{max}$=1.15MGOe, 그리고 이방성의 경우, (BH)$_{max}$=3.23MGOe를 얻었으며 시료를 이방성화하므로서 자기특성면에서 등방성인 경우의 2~3배의 개선효과를 얻었다. 그리고 소결온도는 1210.deg.C에서 가장 좋은 특성을 나타내었으며 큐리온도는 등방성의 경우 T$_{c}$=410~420.deg.C에서 이방성의 경우 T$_{c}$=439~445.deg.C로서 약 30.deg.C가 향상되었다.

• 보존과학연구
• /
• s.13
• /
• pp.37-58
• /
• 1992

Iron artifacts from Busǒ Sansǒng inffered to late Baikjae periodwere studied on the aspects of metallugy. These materials were the largest size ever since excavated. From the analytical results these artifacts were found to be pureiron system without impurities or hypo-eutectoid steel system in below 0.3% in carbon contents. From the content of phosphorus in the range of 0.03∼0.05% as aim purity it was shown that charcoal were used for making these iron artifacts from sponge iron not fusion method. By observing metallugical structure it was found that iron artifacts was manufactured by repetitive folding and hammering forging method and some by heating method for adding carbon with cool water. This method were to improve the quality of the soften steel to harden one. In addition to those above repetitive hammering method eliminated the nonferrous materials such as slag inclusion and remained relatively pure ferrite.

• Polymer(Korea)
• /
• v.30 no.2
• /
• pp.124-128
• /
• 2006

Heavy weight of the camouflage materials was always the main problem. To solve it, the low infrared emissivity fibers with the radar absorbing property (LIFR) were prepared. The low infrared emissivity fibers (LIF) were firstly melt-spun by co-extrusion of polypropylene (PP) and PP/various fillers master-batches using general conjugate spinning. The infrared emissivity of LW with AA and ZnO was decreased respectively compared with that of pure polypropylene fibers. The infrared emissivity of LIF with 15 wt% Al and 2 wt% ZnO in the sheath-part can reach 0.58. To improve LIF radar absorbing property, LIFR was prepared by filling the 50 wt% ferrite and bronze in the core-part of LIF. The radar absorbing efficacy of LIFR was good and the infrared emissivity was low. For the characterization, fiber electron intensity instrument and differential scanning calorimetry (DSC) were used for the analysis of mechanical properties, thermal and crystallization behavior of the spun-fibers. Scanning electron microscopy (SEM) was carried out to observe the particle distribution of the bicomponent fibers.

• International Journal of Ocean System Engineering
• /
• v.1 no.1
• /
• pp.46-51
• /
• 2011

In a line heating process for hull forming, the phase of the steel transforms from austenite to martensite, bainite, ferrite, or pearlite depending on the actual speed of cooling following line heating. In order to simulate the water cooling process widely used in shipyards, a heat transfer analysis on the effects of impinging water jet, film boiling, and radiation was performed. From the above simulation it was possible to obtain the actual speed of cooling and volume percentage of each phase in the inherent strain region of a line heated steel plate. Based on the material properties calculated from the volume percentage of each phase, it should be possible to predict the plate deformations due to line heating with better precision. Compared to the line heating experimental results, the simulated water cooling process method was verified to improve the predictability of the plate deformation due to line heating.

• Journal of the Korean Ceramic Society
• /
• v.53 no.5
• /
• pp.489-493
• /
• 2016

Scandia ($Sc2O_3$)-stabilized zirconia (ScSZ) electrolyte-supported symmetrical solid oxide electrolyzer cells (SOECs), in which lanthanum strontium cobalt ferrite (LSCF)-gadolinia ($Gd_2O_3$)-doped ceria (GDC) composite materials are used as both the cathode and anode, were fabricated and their high temperature steam electrolysis (HTSE) performance was investigated. Current density-voltage curves were obtained for cells operated in 10% $H_2O$/90% Ar at 750, 800, and $850^{\circ}C$. It was possible to determine the ohmic, cathodic, and anodic contributions to the total overpotential using the three-electrode technique. The HTSE performance was significantly improved in the symmetrical cell with LSCF-GDC electrodes compared to the cell consisting of an Ni-YSZ cathode and LSCF-GDC anode. It was found that the overpotential due to the LSCF-GDC cathode largely decreased and, at a given current density, the total cell voltage decreased, which resulted in the enhanced hydrogen production rate in the symmetrical cell.

• Journal of Korea Foundry Society
• /
• v.28 no.3
• /
• pp.113-118
• /
• 2008

A new approach of producing martensitic structure for guide-roll materials was developed using centrifugal casting instead of classic overlay welding process. Centrifugal casting offered a simpler process, fewer defects and even microstructures. Especially in terms of thermal fatigue cracking which usually occurs in the HAZ of welding beads of used continuous caster guide roll materials made by overlay welding process. A typical tensile strength of 1,600 MPa was obtained by this process and was higher than typical tensile strength($800{\sim}1,200\;MPa$) with overlay welding technique. Tempering at $400{\sim}550^{\circ}C$ for 2 hrs was observed to have significant precipitate hardening effect which increases strength and elongation. Nitrogen content from the Cr-N input in the casting process was found to have positive contribution to decrease the volume fraction of ${\delta}$-ferrite which directly corresponds to increasing strength of the roll materials.

• Korean Journal of Metals and Materials
• /
• v.50 no.4
• /
• pp.280-284
• /
• 2012

In this study, we prepared a sample of AISI 409L weld metals using automotive exhaust manifolds and evaluated their corrosion properties by conducting an anodic polarization test after 10 minute of heat treatment at $900^{\circ}C$. The specimens of AISI 409L transformed fully ferrite. Weld metal was refined more than base metal. Specimen of heat treatment at $900^{\circ}C$ and as weld specimen was formed precipitation. However heat treatment specimen was bulkly formed and coarser than the as weld specimen. The strength measured by 10 Hv highly at heat treatment specimens in comparison with as weld. The increase in strength is attributed to the precipitation of Ti. The result of heat treatment suggest that there was a decrease of current density and high corrosion potential. Following heat treatment process produced Ti precipitation and for this reason, it can restrain Cr-carbide so that steel will have more corrosion resistance.