• Restorative Dentistry and Endodontics
• /
• 제15권1호
• /
• pp.107-119
• /
• 1990

The purpose of this study was to evaluate the marginal adaptability of the amalgam restorations in applying the cavity varnish (Copalite$^{(R)}$) and dentin bonding agent (Scotchbond 2$^{(R)}$) under the scanning electron microscope. For this study, eighteen sound extracted human molars were selected. Class I cavities in 12 teeth and class V cavities in 6 teeth were prepared using an air turbine with No. 701 tungsten carbide bur and finished using a low speed handpiece with No. 557 fissure bur. The prepared specimens were then divided into three groups including 4 class I cavities and 2 class V cavities in each group and restored as follows ; Group I. All the prepared cavities were restored with amalgam only (Control). Group II. Two layers of Copalite$^{(R)}$ cavity varnish were applied to the cavities with a gentle stream of air after each application and cavities were restored with amalgam. Group III. The enamel cavity margins were etched with 37% phosphoric acid gel for 60 sec., rinsed for 30 sec. and dried. One layer of visible lightcured Scotchbond Dental Adhesive$^{(R)}$ was applied and immediately cured for 20 seconds with visible light-cure unit and cavities were restored with amalgam. All the specimens were cut at the neck of the teeth and the occlusal halves of specimens were sectioned buccolingually in the longitudinal axis centering the amalgam restorations, using the disk. The cut specimens were ground with sandpapers (400, 600, 800, 1000 grit), and cleaned for 5 minutes in the ultrasonic cleaner (Brason Co. U.S.A.). In the cut surfaces, the amalgam - tooth interfaces were examined under the scanning electron microscope (JSM, 35C type, JEOL). The obtained results were as follows ; 1. The amalgam-tooth interfaces were reduced more significantly in the Copalite$^{(R)}$ and Scotchbond 2$^{(R)}$ application group than in the control group. 2. In the class I cavities, the Scotchbond 2$^{(R)}$ application group showed the findings similar to the Copalite$^{(R)}$ application group in the cavity floor, and the marginal adaptability was better in the side wall than in the cavity floor. 3. In the class I cavities, the Scotchbond 2$^{(R)}$ application group showed better marginal adaptability in the occlusal margin than in the gingival margin. 4. The marginal adaptability was in the order of the Scothbond 2$^{(R)}$ application group, the Copalite$^{(R)}$ application group and the control group.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제43권2호
• /
• pp.77-82
• /
• 2017

Objectives: The aim of this study was to compare the mechanical resistance of four different osteosyntheses modeled in two different sagittal split ramus osteotomy (SSRO) designs and to determine the linear loading in a universal testing machine. Materials and Methods: An in vitro experiment was conducted with 40 polyurethane hemimandibles. The samples were divided into two groups based on osteotomy design; Group I, right angles between osteotomies and Group II, no right angles between osteotomies. In each group, the hemimandibles were distributed into four subgroups according to the osteosynthesis method, using one 4-hole 2.0 mm conventional or locking plate, with or without one bicortical screw with a length of 12.0 mm (hybrid technique). Each subgroup contained five samples and was subjected to a linear loading test in a universal testing machine. Results: The peak load and peak displacement were compared for statistical significance using PASW Statistics 18.0 (IBM Co., USA). In general, there was no difference between the peak load and peak displacement related to osteotomy design. However, when the subgroups were compared, the osteotomy without right angles offered higher mechanical resistance when one conventional or locking 2.0 mm plate was used. One locking plate with one bicortical screw showed higher mechanical resistance ($162.72{\pm}42.55N$), and these results were statistically significantly compared to one conventional plate with monocortical screws (P=0.016) and one locking plate with monocortical screws (P=0.012). The difference in peak displacement was not statistically significant based on osteotomy design or internal fixation system configuration. Conclusion: The placement of one bicortical screw in the distal region promoted better stabilization of SSRO. The osteotomy design did not influence the mechanical behavior of SSRO when the hybrid technique was applied.

• 대한치과보철학회지
• /
• 제45권3호
• /
• pp.362-374
• /
• 2007

Statement of problem. The intial stability for osseointegration of implant has been an interesting factor. Especially, in the case of poor bone quality or immediately loaded implant, various strategies have been developed focusing on the surface of materials to improve implant fixation to bone. The microscopic properties of implant surfaces play a major role in the osseous healing of dental implants. Purpose. The aims of this study are to perform a histologic and histomorphometric comparison of the healing characteristics of three different surfaces and the comparison of resonance frequency analysis (RFA) values measured by $Osstell^{TM}$ and perio-test values (PTV) measured by Periotest. Material and methods. A total of 24 screw titanium implants (Dentium Co., Seoul, Korea) with 6mm in length and 3.4mm in diameter, were placed in the mandible of 4 beagle dogs. Implants were divided into three groups following the surface treatment methods: Group I is machined(control group). Group II is anodically oxidized. Group III is coated 500nm in thickness with hydroxyapatite(HA) by ion beam assisted deposition(IBAD) on the anodized oxidization. Bone blocks from 2 dogs were caught after 3 weeks of covered healing and another blocks from 2 dogs after 6 weeks. RFA values and PTV were measured right after insertion and at 3 and 6weeks. Histomorphometric analysis was made with Kappa Image Base System to calculate bone-to-implant contact (BIC) and bone area inside the threads. Pearson's correlation analyses were performed to evaluate the correlation between RFA and PTV, BIC and bone area ratio of three different surfaces at 3 and 6 weeks. Results. 1) In all surface treatment methods, the RFA values decreased and the PTV values increased until 6 weeks in comparison to initial values. 2) At 3 weeks, no significant difference was found from bone-to-implant contact ratio and bone area ratio of three different surface treatment methods(P>0.05). However, at 6 weeks, different surface treatment methods showed significantly different bone-toimplant contact ratio and bone area ratio(P<0.05). 3) In the implants with the IBAD on the anodic oxidization, significant difference was found between the 3 weeks and the 6 weeks bone area ratio(P<0.05). 4) Correlation was found between the RFA values and the bone area ratio at 3 and 6 weeks with significant difference(P<0.05). Conclusions. These results indicate that the implants with the IBAD on the anodic oxidization may have a high influence on the initial stability of implant.

• 한국조경학회지
• /
• 제18권3호통권39호
• /
• pp.99-113
• /
• 1990

The purpose of this study was to prepare some more up-dated and advanced curriculum in Landscape Architecture in Junior College education to bring up a leading professional who can meet the changing social needs. To achieve this goal, the data about the actual employment status of graduates, current relevant systems and legistations, the questionnaires of Landscape companies, graduates and undergraduates, and the current relevant curriculum of domain 6 junior colleges and Japanese relevant curriculum was gathered and analyzed The results are as follows ; 1. Currently the majority of the graduates are employed in Construction field, but the employment trend of graduates shows diversification and subdividing as following 5 fields, that is Construction, Design, Maintenance, Administration and Indoor Landscaping. 2. It is essential to bring up a Landscape Technician who has a Landscape Certificate of qualifications(esp. 2nd class). 3. Lately, the actual Practice came to be one item of the qualifying examination, so the subjects of Landscape Design, Landscape Construction and Landscape Estimation Should be emphasized, Accordingly, current curriculum should be revised. 4. Currant curriculum model(1979) made by the Ministry of Education doesn't play a real and adequate role and should be up-dated in view of the current curriculum of domain 6 junior colleges has no regular standards. In preparation for new standardized curriculum model, following criterior could be suggested, that is, ratio of the Major Required Subjects vs. The Major Optional Subjects would be 50 : 50, and the Major Optional Subject would be 48 credits which is 150% of the Required Credits(32 credits) 5. The subjects such as Basic Agriculture, Afforestation, Nature Conservation, Sketch, Civil Engineering, Landscape Seminar and Modelling Practice would be deleted in the curriculum model established in 1983. 6. The subjects such as Perspective Practice, Indoor Landscaping, Landscape Legislation and Landscape Design( III ) could be newly opened to meet the social needs, to prepare for the qualifying examination and to serve well in the employment fields. 7. The subjects of Surveying ( I ) & ( II ) would be unified into one Subject as Surveying, and some in view of the average situation of 6 junior colleges. 8. It is urgent to open some subject related to computer. At first, An Introduction to Computer could be recommended in the cultural studies course and Landscape Computer Technique as the Major Optional Subjects.

• Archives of Pharmacal Research
• /
• 제28권4호
• /
• pp.413-420
• /
• 2005

We previously demonstrated the ability of ginseng saponins (active ingredients of Panax ginseng) to enhance $Ca^{2+}$-activated $Cl^{-}$ current. The mechanism for this ginseng saponin-induced enhancement was proposed to be the release of $Ca^{2+}$ from $IP_{3}-sensitive$ intracellular stores through the activation of PTX-insensitive $G\alpha_{q/11}$ proteins and PLC pathway. Recent studies have shown that calmodulin (CaM) regulates $IP_{3}$ receptor-mediated $Ca^{2+}$ release in both $Ca^{2+}-dependent$ and -independent manner. In the present study, we have investigated the effects of CaM on ginseng saponin-induced $Ca^{2+}$-activated $Cl^{-}$ current responses in Xenopus oocytes. Intraoocyte injection of CaM inhibited ginseng saponin-induced $Ca^{2+}$-activated $Cl^{-}$ current enhancement, whereas co-injection of calmidazolium, a CaM antagonist, with CaM blocked CaM action. The inhibitory effect of CaM on ginseng saponin-induced $Ca^{2+}$-activated $Cl^{-}$ current enhancement was dose- and time-dependent, with an $IC_{50} of 14.9\pm3.5 {\mu}M$. The inhibitory effect of CaM on saponin's activity was maximal after 6 h of intraoocyte injection of CaM, and after 48 h the activity of saponin recovered to control level. The half-recovery time was calculated to be $16.7\pm4.3 h$. Intraoocyte injection of CaM inhibited $Ca^{2+}$-induced $Ca^{2+}$-activated $Cl^{-}$ current enhancement and also attenuated $IP_{3}$-induced $Ca^{2+}$-activated $Cl^{-}$ current enhancement. $Ca^{2+}$/CaM kinase II inhibitor did not inhibit CaM-caused attenuation of ginseng saponin-induced $Ca^{2+}$-activated $Cl^{-}$ current enhancement. These results suggest that CaM regulates ginseng saponin effect on $Ca^{2+}$-activated $Cl^{-}$ current enhancement via $Ca^{2+}$-independent manner.

• 한국식품과학회지
• /
• 제14권4호
• /
• pp.309-314
• /
• 1982

Bacillus natto 및 Bacillus subtilis 균(菌)을 이용한 방법 및 볏짚을 이용한 재래식 방법에 따라 제조한 청국장의 저장(貯藏)과정 중 성분변화를 측정한 결과는 다음과 같다. 1. 저장(貯藏) 중 pH는 대체로 저하(低下)하는 경향을 보여 저장(貯藏) 18일 후에는 7.0 이상으로 나타났고 식염(食鹽)은 $5.28{\sim}6.4%$ 사이였으며 적정산도(滴定酸度)는 B. subtilis 구(區)가 최대치(最大値)를 나타냈다. 2. 수분함량(水分含量)은 $50.94{\sim}56.74%$를 보였고 조단백함량(粗蛋白含量)은 $14.44{\sim}18.60%$로서 시험구에 따라 다소 차이가 있어 불규칙적인 증감현상을 보였다. 이에 반해 조지방(粗脂肪)과 조섬유(粗纖維)는 대체로 감소하는 경향이었다. 3. 총당(總糖)과 ethyl alcohol함량(含量)은 시험구 모두 감소하는 경향이었는데 저장(貯藏) 18일후에 총당(總糖)은 B. subtilis구(區)가 가장 낮았다. 4. 아미노태(態) 질소(窒素)와 수용성질소(水溶性窒素)의 함량(含量)은 경시적으로 증가하는 경향이었으나 각 시험구간의 차이는 없었다. 5. Amylase와 Protease의 활성(活性)은 경시적으로 불규칙적인 변화를 보여 각 시험구간에 큰 차이가 없이 대체로 미약(微弱)하였다.

• Korean Journal of Acupuncture
• /
• 제23권3호
• /
• pp.133-160
• /
• 2006

Objectives : Scolopendrae Corpus has a broad array of clinical applications in Korean medicine, including treatment of inflammatory conditions such as arthritis. To explore the global gene expression profiles in human Raw cell lines treated with Scolopendrae Corpus herbal-acupuncture solution (SCHAS), cDNA microarray analysis was performed. Methods : The Raw 264.7 cells were treated with lipopolysaccharide (LPS), SCHAS, or both. The primary data was normalized by the total spots of intensity between two groups, and then normalized by the intensity ratio of reference genes such as housekeeping genes in both groups. The expression ratio was converted to log2 ratio. Normalized spot intensities were calculated into gene expression ratios between the control and treatment groups. Greater than 2 fold changes between two groups were considered to be of significance. Results : Of the 8 K genes profiled in this study, with a cut-off level of two-fold change in the expression, 20 genes (BCL2-related protein A1, MARCKS-like 1, etc.) were upregulated and 5 genes (activated RNA polymerase II transcription cofactor 4, calcium binding atopy-related autoantigen 1, etc.) downregulated following LPS treatment. 139 genes (kell blood group precursor (McLeod phenotype), ribosomal protein S7, etc.) were upregulated and 42 genes (anterior gradient 2 homolog (xenopus laevis), phosphodiesterase 8B, etc.) were downregulated following SCHAS treatment. And 10 genes (yeast saccharomyces cerevisiae intergeneic sequence 4-1, mitogen-activated protein kinase 1, etc.) were upregulated and 8 genes (spermatid perinuclear RNA binding protein, nuclear receptor binding protein 2, etc.) were downregulated following co-stimulation of SCHAS and LPS. Discussions : It is thought that microarrays will play an ever-growing role in the advance of our understanding of the pharmacological actions of SCHAS in the treatment of arthritis. But further studies are required to concretely prove the effectiveness of SCHAS.

• 보건교육건강증진학회지
• /
• 제19권3호
• /
• pp.107-120
• /
• 2002

There has been a rapid industrial progress in Korea since 1962 by the success of 5-year economic development plan, and the number of industrial work has also made a rapid increase. Consequently, the management of the occupational health for the purpose of promoting the health of industrial workers and improving the working environment is badly needed in these days. Health services on industrial noisy environment have been provided only for noise-induced hearing loss management until now. But gradually, modem diseases and death have come to be related to the stress and mental health, therefore noise-induced mental disorder, like a stress became very important. Thus, this study has been carried out to analyze the relationship between workers' stress symptoms and the perceived working environment and the perceived working conditions. This study included 786 industrial workers selected from II factories in Buchun. The results were as follows: 1. For demographic characteristics, most of the workers were males(75.7%), the 20～29 years old were 33.8% and those who graduated from high school were 56.1%. The workers whose monthly income ranged from 700,000 to 1,500,000 won were 37.9% and who has a religion were 49.0%. 2. For occupational characteristics, workers who had worked 5～10 years in the factories were 35.8%. Those who felt much for them workload were 42.7% and who worked more than 8 hours a day were 73.7%. Those who were dissatisfied with their pay and job were 51.1 % and 31.2%. The workers who responded ventilation condition of their worksites were bad were 50.4% and the dissatisfied with working environment of their worksites were 43.8%. 3. For the noise exposure level in worksite, workers who were exposed to 70∼90㏈ were 37.4%, 90∼100㏈ were 25.2% and 50∼70㏈ were 18.8%. 4. Workers∼ stress symptoms were significantly related to marital status and their monthly income(P〈0.05). Workers who were single and had lower monthly income showed higher PSI(Psychiatric Symptom Index) scores than those who were married and had higher monthly income. Higher PSI scores were also significantly related to the night-work, workload, dissatisfaction with their job, and bad relationship with their bosses or co-workers. 5. The higher noise exposure level in worksite from 80㏈ was, the more severe stress symptoms including PSI subparts were reported; Anxiety, Anger, Depression, and Cognitive disorder symptom(P〈0.001). 6. According to the results of stepwise multiple regression analysis, factors affecting workers' PSI scores were noise exposure level in worksite(R2=0.150), relationship with coworkers, amount of workload, monthly income and relationship with bosses orderly and the total R2 of this 6 factors was 29.7%.

• Tuberculosis and Respiratory Diseases
• /
• 제70권4호
• /
• pp.323-329
• /
• 2011

Background: Although patients with tuberculous-destroyed lung (TDL) account for a significant proportion of those with chronic airflow obstruction, it is difficult to distinguish patients with airway obstruction due to TDL from patients with pure chronic obstructive pulmonary disease (COPD) on initial presentation with dyspnea. We investigated clinical features differing between (i) patients with TDL and airway obstruction and (ii) those with COPD admitted to the intensive care unit (ICU) due to dyspnea. Methods: We reviewed the medical records of patients with TDL who had a forced expiratory volume in 1 second (FEV1)/forced vital capacity (FVC) of <70% on a pulmonary function test (PFT; best value closest to admission) and patients with COPD without a history of pulmonary tuberculosis (TB) who were admitted to the ICU. Ultimately, 16 patients with TDL and 16 with COPD were compared, excluding patients with co-morbidities. Results: The mean ages of the patients with TDL and COPD were 63.7 and 71.2 years, respectively. Mean FVC% (50.4% vs. 71.9%; p<0.01) and mean FEV1% (39.1% vs. 58.4%; p<0.01) were significantly lower in the TDL group than in the COPD group. More frequent consolidation with TB (68.8% vs. 31.3%; p=0.03) and more tracheostomies (50.0% vs. 0.0%; p=0.02) were observed in the TDL than in the COPD group. Conclusion: Upon ICU admission, patients with TDL had TB pneumonia more frequently, more diminished PFT results, and more tracheostomies than patients with COPD.

• Journal of Pharmaceutical Investigation
• /
• 제32권1호
• /
• pp.47-54
• /
• 2002

Cimetropium bromide, a quaternary ammonium compound which is chemically related to scopolamine, exhibits its antispasmodic activity by competing with acetylcholine for the muscarinic receptors of the smooth muscle of gastrointestinal tract. The drug has been used for the treatment of various disorders involving spasms of the musculature of the gastrointestinal, biliary and genitourinary tracts. The purpose of the present study was to evaluate the bioequivalence of two cimetropium bromide tablets, $Algiron^{TM}$ (Boehringer Ingelheim Korea Ltd.) and $Alpit^{TM}$ (Hana Pharmaceutical Co., Ltd.), according to the prior and revised guidelines of Korea Food and Drug Administration (KFDA). The cimetropium bromide release from the two cimetropium bromide tablets in vitro was tested using KP VII Apparatus II method with various different kinds of dissolution media (pH 1.2, 4.0, 6.8 buffer solution and water). Twenty normal male volunteers, $25.25{\pm}2.10$ years in age and $65.76{\pm}6.39$ kg in body weight, were divided into two groups and a randomized $2{\times}2$ cross-over study was employed. After three tablets containing 50 mg of cimetropium bromide per tablet were orally administered, blood was taken at predetermined time intervals and the concentrations of cimetropium bromide in serum were determined using HPLC method with UV detector. The dissolution profiles of two cimetropium bromide tablets were very similar at all dissolution media. Besides, the pharmacokinetic parameters such as $AUC_t,\;C_{max}\;and\;T_{max}$ were calculated and ANOVA test was utilized for the statistical analysis of the parameters using non-transformed and logarithmically transformed $AUC_t\;and\;C_{max}$. The results showed that the differences in $AUC_t,\;C_{max}\;and\;T_{max}$ between two tablets based on the $Algiron^{TM}$ were 2.19%, -5.97% and 3.49%, respectively. Minimum detectable differences $({\Delta})\;at \;{\alpha}=0.05\;and\;1-{\beta}=0.8$ were less than 20% (e.g., 13.71 %, 19.05% and 15.11% for $AUC_t,\;C_{max}\;and\;T_{max}$, respectively). The powers $(1-{\beta})\;at\;{\alpha}=0.05,\;{\Delta}=0.2\;for\;AUC_t$, $C_{max}\;and\;T_{max}$ were 97.79%, 83.22% and 95.60%, respectively. The 90% confidence intervals were within ${\pm}20%$ (e.g., $-5.84{\sim}10.21,\;-17.11{\sim}5.18\;and\;-5.35{\sim}12.33\;for\;AUC_t,\;C_{max}\;and\;T_{max}$, respectively). There were no sequence effect between two tablets in logarithmically transformed $AUC_t\;and\;C_{max}$. The 90% confidence intervals using logarithmically transformed data were within the acceptance range of log(0.8) to log(1.25) (e.g., $0.94{\sim}1.10\;and\;0.85{\sim}1.05\;for\;AUC_t\;and\;C_{max}$, respectively). Two parameters met the criteria of prior and revised KFDA guideline for bioequivalence, indicating that $Alpit^{TM}$ tablet is bioequivalent to $Algiron^{TM}$ tablet.