• Journal of Environmental Science International
• /
• v.7 no.3
• /
• pp.335-348
• /
• 1998

The intensive meteorological observations including pibal balloon at Ungcheon, airsonde and 10m meteorological tower observations at Gulup-Do, where are located In the western coastal region, are taken to Investigate the characteristics of the upper and lower atmospheric structure and the local circulation pattern during the period of 17 to 22 September 1996. The diurnal variations of weather elements(i.e. air temperature, humidity, pressure, and Und speeds at Gulup-Do are analyzed and discussed with those at four inland meteorological stations. The vertical profiles of wind vector, ortho- gonality(Ω), and shear obtained from the pibal obsenrations are also presented to examine the change of wand structure according to the synoptic-scale pressure system's movement. The diurnal temperature changes at Gulup-Do are more sensitive than that of Inland meteorological stations In case of the mow of southwesterlies but are not dominant due to the ocean effect under the Influence of relatively cold northerlies. A well defined mixed layer Is developed from the 500m to the maximum 1700m with a significant capping Inversion layer on the top of it. It can be found from the vertical profiles of wind vector that the wind become generally strong at the interface heights between cloud lay- ers and non-cloud layers. The maximum Und shear Is appeared at the bel각t where the varlauon of wand direction Induced by the passage of synoptic-scale pressure system Is accompanied with the In- crease of Und speed. Based on the wind orthogonality, the change of wind direction with height is more complicated In cloudy day than In clear day. In case of a fair weather, the change of wand direction is showed to be at around 2km.

• Atmosphere
• /
• v.16 no.3
• /
• pp.203-213
• /
• 2006

The objective of this paper is to investigate the effects of physical parameterization on the simulation of a snowfall event over Korea caused by air-mass transformation by using the PSU/NCAR MM5. A heavy snowfall event over Korea during 3-5 January 2003 is selected. In addition to the control experiments employing simple-ice microphysics scheme, MRF PBL scheme, and original surface layer process, three consequent physics sensitivity experiments are performed. Each experiment exchanges microphysics (Reisner Graupel), boundary layer (YSU PBL) schemes, and revised surface layer process with a reduced thermal roughness length for the control run. The control run reproduces an overall pattern of snowfall over Korea, but with a high bias by a factor of about 2. As revealed in the previous studies, the cloud microphysics and PBL parameterizations do not show a significant sensitivity for the case of snowfall. A more sophisticated cloud processes does not reveal a discernible effect on the simulated snowfall. Further, high bias in snowfall is exaggerated when a more realistic PBL scheme is employed. On the other hand, it is found that the revised surface layer process plays a role in improving the prediction of snowfall by reducing it. Thus, it is found that a realistic design of surface layer physics in mesoscale models is an important factor to the reduction of systematic bias of the snowfall over Korea that is caused by air-mass transformation over the Yellow sea.

• Journal of the Korean earth science society
• /
• v.24 no.3
• /
• pp.181-189
• /
• 2003

This study analyzes the results of thunderstorm data observed in the mid-western part of Japan during the winter of 1996-1997. There were 35 instances of thunderstorms with 4,426 instances of lightning detected during the observation period. This study estimates the frequency of lightning occurrence through classification of detected lightning into two types, and analyzes the relationship between lightning types and synoptic pattern. According to the analyzed results, cloud-to-cloud discharge and positive polarity occupied 78% and 42.3% of total discharge, respectively. It is rare for lightning to occur in the winter season, usually occuring during the night (midnight to 5 a.m.). Lightning frequently occurs when there is a prevailing synoptic wind from the norhwest. According to the analyzed results of multiplicity and multi-point lightning, the mean values of multiplicity and multi-point lightning are 1.4 and 1.2, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.61-69
• /
• 2015

Through Virtual Machine technology(VM), VMs can be packed into much fewer number of physical servers than that of VMs. Since even an idle physical server wastes more than 60% of max power consumption, it has been considered as one of energy saving technologies to minimize the number of physical servers by using the knapsack problem solution based on the computing resources. However, this paper shows that this tightly packed consolidation may not achieve the efficient energy saving. Instead, a service pattern-based VM consolidation algorithm is proposed. The proposed algorithm takes the service time of each VM into account, and consolidates VMs to physical servers in the way to minimize energy consumption. The comprehensive simulation results show that the proposed algorithm gains more than 30% power saving.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.3
• /
• pp.109-119
• /
• 2019

The purpose of this study is to examine fashion trends and the direction of the four fashion collections by analyzing the design key-words of the four major international fashion collections in 2018. The data of this study was collected by extracting the key-words from Marie Claire Korea in 2018, with the total of the collected data numbering 2,144. The data was analyzed by text mining using the R program and word-cloud, and a co-occurrence network analysis was conducted. The results of this study are as follows: First, the key-words of fashion collection designs in 2018 were fringe and ruffle detail, silk and denim fabric, vivid color, stripe and check pattern, pants suit item, and oversized silhouette, focusing on romanticism and sport. Second, seasonal characteristics of the fashion collections were pastel colors in S/S, primary and vivid colors in F/W. Details were embroidery and cutouts in S/S, patchwork and fringe in F/W. Third, the design trends of the four major fashion collections were presented in the Paris collection: stripes, check patterns, embroidery, lace, tailoring, draping, romanticism, and glamor. In the Milan collection, checks, prints, denim, and minidresses reflected sport and romanticism. The London collection included fringe, ruffles, floral patterns, flower patterns, and romanticism. The New York collections included vivid colors, neon colors, pastel colors, oversize silhouettes, bodysuits, and long dresses.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.613-621
• /
• 2019

Recently, with the development of the Internet of Things (IoT) and cloud computing technologies, security threats have increased as malicious codes infect IoT devices, and new malware spreads ransomware to cloud servers. In this study, we propose a threat-detection technique that checks obfuscated script patterns to compensate for the shortcomings of conventional signature-based and behavior-based detection methods. Proposed is a malicious code-detection technique that is based on malicious script-pattern analysis that can detect zero-day attacks while maintaining the existing detection rate by registering and checking derived distribution patterns after analyzing the types of malicious scripts distributed through websites. To verify the performance of the proposed technique, a prototype system was developed to collect a total of 390 malicious websites and experiment with 10 major malicious script-distribution patterns derived from analysis. The technique showed an average detection rate of about 86% of all items, while maintaining the existing detection speed based on the detection rule and also detecting zero-day attacks.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2B
• /
• pp.161-170
• /
• 2006

A tracer test technique using a radioisotope was proposed to investigate pollutant mixing characteristics in rivers. The main advantages of radioisotope as a tracer in field tests are that it can be detected easily, and that its detection range is quite large. Also, using the radioisotope, the amount sorbed by the bed material and the biota may be a minimum. Field tracer tests were conducted at seven different sites in natural rivers with various meandering pattern. Based on the acquired data, the behavior of the tracer cloud in the intermediate-field was examined two-dimensionally, and dispersion coefficients were calculated using several evaluation methods. Results revealed that the tracer cloud was transported skewed to the outer bank and dispersion coefficients in bends were larger than those in straight reaches.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.1
• /
• pp.120-147
• /
• 2019

In this study, we divided the portraits in the reign of King Seonjo into those which were created before and after the Japanese invasion. We then examined various aspect of costumes expressed in the portraits of meritorious vassals. To analyze official uniforms (Heuk-Danryeung), we examined the Samo height; the side wings' type and pattern; the Danryeung pattern; the Mu style; the processing method of lateral lines in Danryeung the rank badge and rank belt, the color of Dabho and Cheolrik, which were undergarment of Danryeung and Heuk-wa. The meritorious vassals' portraits, prior to Imran, were analyzed with a portrait of Han Eung-in, a Gwang-kuk Pyeong-nan meritorious vassals. The Samo was the highest of the Choson dynasties, and the cloud and treasure pattern was identified on the side wings. The Heuk-Danryeung was a dark blue(acheongsaeg) Danryeung of manja-shaped cloud patterns with a large outward wrinkled Mu, and it had a wild goose badge (second rank) and a Sabgeumdae. It did not coincide with the Pumgye(Jaheondaebu) recorded in Gugjo-inmulgo. Reddish Dabho for Dangsang-kwan, green Cheolrik which was undergarment of Danryeung, and Heuk-wa. were identified. After the invasion of Japan, portraits of Hoseong, Seonmu, and Cheong-nan meritorious vassals were analyzed through eighteen portraits, including Lee Hyeon-bok. After the invasion of the Japanese, the height of the Samo's top was much lower and the width of the side wings was wider than before the invasion of Japanese. The Heuk-Danryeung was a dark blue (acheongsaeg) Danryeung of manja-shaped cloud patterns with a stretching backward Mu. Rank badge and rank belts were almost identical with the record, but there were two exceptions (Sin-jab and Kim, Sae-sin). Therefore, it was reaffirmed that the meritorious vassals' portraits were drawn by the Pumgye at the time of appointment. Among the undergarments of Heuk-Danryeung, green Dabho(11), blue Dabho(4), reddish Dabho(3), and blue Cheolrik(10), green Cheolrik(6), reddish Cheolrik(1), and yucheongsaeg Cheolrik(1) were identified, However, it is suggested that the Dabho of Hoseong, Seonmu, and Cheong-nan meritorious vassals should be the reddish Dabho of Dangsang-kwan, which is the same as the previous Imran, and a green Cheolrik.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.5 no.4
• /
• pp.86-92
• /
• 2002

The feasibility of counting number of small vessels and position in Korean waters using the panchromatic imageries derived from the IRS-1C was tested. The parameters for interpretation of satellite's imageries of small vessels were location(position), size, shape, shadow, tone, texture and pattern, height and depth, situation and association with other vessels. The position of small vessels in the sea without GCP(ground control point) was considered to be inclusive in the satellite imagery with 35 km semi-diameter, denoting rough geographical position of the vessel. The size of vessel was measured by length from stem to stern of the vessel, distinguished by following wave on the surface water. Offshore fishing vessels were separated from merchant ships by their length smaller than 100 m. The shape of vessels on panchromatic imagery of IRS-1C appeared just streamline. In case of clouds which were similar to the shape of small vessels, we were able to distinguish between vessel and cloud by shadow of cloud in the water surface. The tone of sea surface was dark black while small vessel appeared bright white. Small vessel was distinguished from the rough texture of the sea surface and the regular pattern of the waves with white capes when weather was not so good. The situation of the fishing activity was estimated by information of fishing method related to the fishing boat such as the pair trawl in the Yellow Sea.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.2
• /
• pp.137-148
• /
• 2004

In this paper, we propose a new camera calibration method for rotating multi-view cameras to generate image-based panoramic 3D Virtual Environment. Since calibration accuracy worsens with an increase in distance between camera and calibration pattern, conventional camera calibration algorithms are not proper for panoramic 3D VE generation. To remedy the problem, a geometric relationship among all lenses of a multi-view camera is used for intra-camera calibration. Another geometric relationship among multiple cameras is used for inter-camera calibration. First camera parameters for all lenses of each multi-view camera we obtained by applying Tsai's algorithm. In intra-camera calibration, the extrinsic parameters are compensated by iteratively reducing discrepancy between estimated and actual distances. Estimated distances are calculated using extrinsic parameters for every lens. Inter-camera calibration arranges multiple cameras in a geometric relationship. It exploits Iterative Closet Point (ICP) algorithm using back-projected 3D point clouds. Finally, by repeatedly applying intra/inter-camera calibration to all lenses of rotating multi-view cameras, we can obtain improved extrinsic parameters at every rotated position for a middle-range distance. Consequently, the proposed method can be applied to stitching of 3D point cloud for panoramic 3D VE generation. Moreover, it may be adopted in various 3D AR applications.