• 한국의류학회지
• /
• 제18권2호
• /
• pp.273-282
• /
• 1994

The physiological significances of the upper and lower body on thermoregulation and sensation were studied in this paper. Experiments were carried out on 4 females in a climatic chamber conditioned at 1) $25^{\circ}C\rightarrow35^{\circ}C\rightarrow25^{\circ}C$, 2) $25^{\circ}C\rightarrow15^{\circ}C\rightarrow25^{\circ}C$, both with 50% R.H., covering the upper body (U) or lower body (L) with garments. 1. When the upper or lower body is covered or exposured respectively, the mean skin tempterature of upper body is higher than that of lower body. And upper body is more easily influenced by the environmental temperature than lower body. It means the skin temperatures of the upper body change faster than those of the lower body following the environmental changes. 2. In U and L, the skin temperatures of the upper limbs (thighs, upper arms) are lower than those of the peripherals (hands, feet). 3. Warm sensations and skin temperatures of the upper body showed high correlation and it was the case with cold sensations and skin temperatures of the lower body. 4. In high temperature condition $(25^{\circ}C\rightarrow35^{\circ}C\rightarrow25^{\circ}C)$, mean skill temperature and rectal temperature in L were lower than in U. This lower rectal temperature in L is probably due to the insulation of the lower body with garments that promotes the heat radiation only in the high temperature environment.

• 한국의류학회지
• /
• 제16권2호
• /
• pp.237-244
• /
• 1992

The purpose of this study was to comparatively evaluate thermal and water transmission properties of several vapor permeable water repellent (VPWR) fabrics and synthetic battings that became available in recent years. Five VPWR fabrics evaluated were Hipora in three coating variants, $Gore-Tex^{\circledR}$ and $Aitace^{\circledR}$. Battings evaluated were $Viwarma^{\circledR}$, $Uniwarmr^{\circledR}$, $Thinsulate^{\circledR}$, and $Airseal^{\circledR}$ Thermal resistance and water vapor transmission were measured for each fabric and batting and in all combinations. Thermal resistance at zero and 37 cm/sec air velocity was determined by the Thermo Labo II technique for simultaneously measuring conduction and radiation heat transfer. Water vapor transmission over 24 hours was measured by a modified weight-gain method in a compact humid chamber at conditions simulating the clothing climate under heavy exercise ($40{\pm}1^{\circ}C$, $90{\pm}2\%$ R.H., and 0.5 m/sec air velocity). Fabric porosity was calculated from fiber density and fabric weight, thickness, and area. Thermal resistance results for the fabrics showed the effectiveness of coatings in inhibiting heat transfer. Measurements taken in wind were: $31.1\~37.6\%$ for $Hipora^{\circledR}$ variants; $31.0\%$ for $Gore-Tex^{\circledR}$; and $18.4\%$ for $Aitaca^{\circledR}$ Measurements without wind were higher but in the same order. Water vapor transmission results were in reverse order: $Aitac^{\circledR}$, $8.8 kg/m^{2};\;Gore-Tex^{\circledR}$, 6.4 kg/$m^{2}$; and $Hipora^{\circledR},\;4.4\~6.0\;kg/m^{2}$. In general thermal resistance increased with porosity. For battings, the thermal resistance with wind results were: $Viwarmu^{\circledR}$, $65.0\%;\; Thinsulate^{\circledR}$, $62.0\%$; $Uniwarm^{\circledR}$, $61.0\%$; and $Airseala^{\circledR},\;53.1\%$. Thermal resistance was proportional to thickness. Thermal resistance of fabric-batting combinations were $20\%$ higher than those of the battings only. Water vapor transmission for combinations was mainly affected by that for the VPWR fabric used.

• 복식문화연구
• /
• 제21권2호
• /
• pp.261-271
• /
• 2013

This study aimed to identify professional climbers'demand for movement functionality in pants worn for rock climbing and ice climbing. Data were collected through in-depth interviews with 12 professional climbers using a semi-constructed questionnaire. The respondents were instructor-level experts whose climbing ability ranged from 5.9 to 5.14 on the Yosemite Decimal System rating scale. The research findings were as follows. Experts wore different climbing pants depending on the type of climbing. For example, they mostly wore high-stretch, second layer pants for rock climbing, while layering first layer, second layer, and third layer pants for ice climbing. There were gender differences regarding the parts of the body in which climbers reported the most discomfort when wearing climbing pants; male climbers most commonly responded 'knees', 'inner thighs' and 'hips' while their female counterparts most commonly responded 'inner thighs', 'exposed back and waist' and 'hips' in that order. Differences were found between rock climbing and ice climbing in terms of wear and tear on pants, preferred fabric properties, and length of pants. Wear and tear was found mainly on the hips and knees of rock climbing pants and on the inner lower hem of ice climbing pants. Listed in the order of preference, the most preferred fabric properties were elasticity, light weight, and durability for rock climbing pants and elasticity, insulation, and protection against water and wind for ice climbing pants. Regarding the length of rock climbing pants, respondents preferred ankle-length pants and cropped pants that did not cover the feet. For ice climbing pants, respondents favored heel-length pants that prevented pieces of ice from entering the clothing. Men showed a high level of preference for ergonomically cut climbing pants. Respondents said the waistband on climbing pants should be simplified so as not to adversely affect climbing maneuvers.

• 한국의류산업학회지
• /
• 제1권3호
• /
• pp.288-295
• /
• 1999

This study was conducted to examine the fatigue phenomenon of mechanical properties in tencel fabrics by repeated washing & shear and tensile deformation. The obtained results are as follows. After performing repeated shear tensile deformation, RT of tencel showed higher increase rate than that of cotton and rayon, whereas its WT and EM was a smaller decrease rate than that of them. This means that tencel's resistance to tensile deformation was the greatest. In the repeated washing and shear tensile deformation, tencel's 2HB, 2HG and 2HG5 showed a remarkable increase rate. In terms of deformation frequency, the greatest change rate appeared at the time of 1000 cycles of repeated shear tensile deformation and 15 times of repeated washing. In the hand value and THV, KOSHI showed a higher increase rate for tencel than for cotton and rayon in both repeated washing and shear tensile deformation, and NUMERI showed a higher increase rate. In the THV the change rate of rayon and cotton could be rarely seen but for tencel, it decreased. tencel's change rate of thermal insulation value by materials was 1.08%, and it increased as the washing frequency increased, compared to the grey fabrics, whereas the change rates of cotton and rayon were 0.74% and 0.22%, respectively. The qmax decreased in the order of cotton>tencel>rayon as the washing frequency increased.

• 한국의상디자인학회지
• /
• 제23권3호
• /
• pp.99-108
• /
• 2021

The present study examines the overall manufacturing status of local wetsuit makers, problems in the manufacturing process, and future research tasks. The study revealed that most manufacturers use neoprene fabric of varying thickness, depending on the body part. Normally, 3 mm-thick fabric is utilized for high-activity body parts and 5 mm-thick fabric is used for high-activity areas requiring thermal insulation. In terms of the manufacturing method, the tools and manufacturing processes used by companies were found to be similar. However, because of the nature of wetsuits requiring a more complicated manufacturing method than that of general clothing, there were some differences in the manufacturing method processes from company to company, such as bonding and ease treatments. According to wetsuit manufacturers, they make incisions in consideration of the body's curvature and the overall shape and design of the wetsuit when developing patterns. For example, most answered that they preform the wrist and ankle parts, where the body's curvature is obvious. On the question regarding the "difficult manufacturing process", the most frequent response was the "bonding" process. Most manufacturers were found to focus on designs that can improve mobility and clothing fit, and commonly experienced low-order quantity as an operational difficulty. As for the question on the wetsuit-related technology needed in the future, the "development of various designs" was the most frequent answer, followed by the "development of lightweight and diverse materials".

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.286-290
• /
• 2009

Generally the window of the building is an objective of mining and having a distant view and also for a circulation it will can open and shut because becomes the structure insulation, the meat detailed drawing it does a very difficult portion, it is. To reduce the loss of the energy which leads, to an air conditioning energy and an expense increase problem the color which the interior furniture and the clothing due to the augmentation and the corpse ultraviolet rays of the unpleasant feeling which is caused by with the transient one solar energy influx which leads the window will burn, it joins in the window and it confronts and the novel solution is demanded.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 춘계학술발표대회 논문집
• /
• pp.123-128
• /
• 2008

Generally the window of the building is an objective of mining and having a distant view and also for a circulation it will can open and shut because becomes the structure insulation, the meat detailed drawing it does a very difficult portion, it is. To reduce the loss of the energy which leads, to an air conditioning energy and an expense increase problem the color which the interior furniture and the clothing due to the augmentation and the corpse ultraviolet rays of the unpleasant feeling which is caused by with the transient one solar energy influx which leads the window will burn, it joins in the window and it confronts and the novel solution is demanded.

• 한국생활과학회지
• /
• 제17권2호
• /
• pp.345-353
• /
• 2008

This survey intends to understand the opinion and status on preschool students' uniform wearing for the purpose of new style development. The results from this study will serve as an activator of related industry. The merit of uniform wearing in these students was recognized primarily as: (1) students can have pride in the schools they attend; (2) they need not worry about clothes to wear every morning. The disadvantage of uniform wearing derives from: (1) students' personality is hardly expressed by uniforms; (2) difficulty in uniform selection suitable for varying weather conditions. This disadvantage felt by their parents suggests the lack of personality expression and appropriate body temperature control. The most prevalent opinion for preference and future improvement points was the consideration of physical activity in children. This indicates that they prefer uniforms rendering minimal restriction on body movements. Other Improvement points stress the activity, uniform laundering and care, convenience in on and off, insulation, colors, design and durability.

• 제어로봇시스템학회논문지
• /
• 제18권8호
• /
• pp.750-757
• /
• 2012

This paper focuses on human adaptive HVAC system that can regulate the thermal comfort of the resident in intelligent buildings. The thermal comfort is represented in this paper by PMV (Predicted Mean Vote) as defined by ISO 7730. This PMV value indicates how hot or cold a resident feels by considering temperature, humidity, resident's metabolic rate, relative air velocity, and clothing insulation. In order to develop such a system, a location detection system based on ZigBee module was used along with temperature sensors, other environment sensors. The human adaptive HVAC system was evaluated experimentally on a test bed emulating a room.

• 한국염색가공학회지
• /
• 제35권4호
• /
• pp.274-283
• /
• 2023

Conductive polymers are polymers that conduct electricity like metal conductors. Unlike typical organic polymers, they are polymers that have the electrical, magnetic, and optical properties of metals or semiconductors. For Example, these conductive polymers include Polypyrrole (PPy), Polyaniline (PANI), and Polythiophene (PT). On the other hand, Insulating polymers do not conduct electricity well while providing insulation, which is the opposite of conductivity. With the exception of conductive polymers, most polymers are non-conductors. Insulating polymers include polyimide (PI), polystyrene (PS), and poly(vinyl alcohol) (PVOH, PVA, or PVAl). Although many different polymers exist, we have simply illustrated the properties and recent developments of conductive and insulating polymers, which have opposite properties.