• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.40
• /
• pp.11.1-11.5
• /
• 2018

Background: Squamous cell carcinoma (SCC) is the most commonly occurring malignant tumor in the oral cavity. In South Korea, it occurs most frequently in the mandible, tongue, maxilla, buccal mucosa, other areas of the oral cavity, and lips. Radial forearm free flap (RFFF) is the most widely used reconstruction method for the buccal mucosal defect. The scar of the forearm donor, however, is highly visible and unsightly, and a secondary surgical site is needed when such technique is applied. For these reasons, buccal fat pad (BFP) flap has been commonly used for closing post-surgical excision sites since the recent decades because of its reliability, ease of harvest, and low complication rate. Case presentation: In the case reported herein, BFP flap was used to reconstruct a cheek mucosal defect after excision. The defect was completely covered by the BFP flap, without any complications. Conclusion: Discussed herein is the usefulness of BFP flap for the repair of the cheek mucosal defect. Also, further studies are needed to determine the possibility of using BFP flap when the defect is deep, and the maximum volume that can be harvested considering the changes in volume with age.

• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.3
• /
• pp.539-573
• /
• 1996

This investigation was designed to determine the effectiveness of the posterior occlusal schemes on masticatory activity during mastication in complete denture. Twelve edentulous subjects were selected for this study. All subjects had no past history and no functional abnormality on masticatory system and TMjoint. And, they had residual ridge of favorable morphology, firm mucosa and Class I skeletal jaw relationship, Twelve experimental denture with interchangeable occlusions(0-degree teeth, 30-degree teeth, Levin teeth and S-A teeth) were constructed for this study. The masticatory performance was analyzed by means of standard sieve(10, 16, 20, 30sieve), and the electrical activity from selected muscles(Temporalis and Masseter muscle) was recorded simultaneously with electromyography(Bio-Pak system) as the subject masticated test foods (rice, peanut and gum) with four different occlusal schemes. Mandibular movement was, also, measured with Sirognathography(Bio-Pak system). These recordings were performed in immediately, after 1 week and after 2 weeks of insertion of complete denture. The results were as follows; 1. The average masticatory performance of 0-degree artificial teeth was higher than any other artificial teeth. 2. Masticatory performance in denture wearer was affected preferentially by food and artificial occlusal schemes. 3. During chewing, there was a statistical difference of EMG activity between masseter and temporal muscle(p<0.01). Especially, EMG activity of working masticatory muscle was highly affected by food rather than by artificial occlusal schemes. 4. In denture wearer, the velocity of opening was not affected by food, whereas, the velocity of closing was faster in soft food chewing than in hard food chewing, and the amount of vertical displacement was grater in chewing of soft and large bolus than in chewing of hard and small bolus. However, the amount of lateral displacement showed conversely (p<0.05). 5. It was considered that masticatory performance in denture wearer is not affected by the condition of residual ridge, the history of denture wear, the preference, the adaptation to artificial teeth and the total mesiodistal length of artificial posterior teeth.

• Journal of the Korean Society of School Health
• /
• v.18 no.1
• /
• pp.15-25
• /
• 2005

Purpose: Recently there are scientific evidences for the health effects of Asian dust-storms. Particularly in 2002, the daily average of $PM_10$ exceeded 600 and 700 $\mu{g}/m^3$ in March and April respectively. We examined the effects of Asian dust‐storms on perceived symptoms and preventive behaviors among children, adults, and elders. Method: The subjects of this study were 425 children, 444 adults and 60 elders. A questionnaire survey was carried out on the children and the adults by teachers and on the elders by interviewers to obtain information on demographic variables, perceived symptoms and preventive behaviors, previous respiratory disease, environmental tobacco smoke, and proximity between the house and the road during Asian dust-storms. We analyzed using descriptive statistics, $X^2$ test and multiple logistic regression models. After adjustment for potential confounders, we estimated the odds ratios and 95% confidence intervals of the children and the elders for perceived symptoms and preventive behaviors. Result: The elders had a significantly higher prevalence of respiratory symptoms than the other groups. The children had a significantly higher prevalence than the adults in getting URI (1.51), coughing (1.68), rhinorrhea (1.46), fever (2.39) and medication for allergy or asthma (1.90). The children had better behaviors than the elders in closing windows (3.57), taking less outdoor recreational activity (2.59) and staying home (2.60). Conclusion: This study suggested that children and elders are susceptible to the effects of Asian dust on health. Health educators should inform these populations about the influence of Asian dust and provide health education for preventive behaviors.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.3 no.2
• /
• pp.91-96
• /
• 2007

Cleidocranial dysplasia(CCD) is a congenital genetic disorder of skeletal and dental abnormality, which is mesodermal dysfunction influencing many tissues and organs, CCD was reported by Morand at first in 1766, And later, it was named cleidocranial dysostosis, cleidocranial dysplasia, Marie-sainton syndrome and mutational dysostosis. It is autosomal dominant disorder and there is no prevalence between man and woman. Until recent days, mutation of Runx2 in chromosome6p21 has known to be a main factor causing CCD. The specific clinical features of CCD are aplasia or hypoplasia of one or both clavicles and incomplete closing of fontanels and cranial sutures. Dental manifestations include retention of deciduous teeth, delayed eruption of permanent teeth, supernumerary teeth and cyst. Because there is no mental retardation and physical disability in CCD patients, they usually can not recognize their dental abnormality by the time of abolescence. So, after exfoliation of deciduous teeth, they usually live with edentulous status. It usually drives CCD patients to suffer from esthetic and functional problem. For this reason, CCD patients must be early diagnosed and improved in their appearance as well as masticatory function. So, surgical removal of supernumerary teeth and orthodontic eruption of the natural permanent teeth at adequate time is necessary.

• Journal of Korean Foot and Ankle Society
• /
• v.8 no.1
• /
• pp.31-38
• /
• 2004

Purpose: The purpose of the study was to identify the subtypes of idiopathic osteoarthritis of the tarsometatarsal joints based on accompanying hindfoot, midfoot, or foot deformities and their corresponding surgical options and also to evaluate the overall clinical results. Materials and Methods: The study included 59 patients (67 feet) with idiopathic tarsometatarsal joint osteoarthritis. Tarsometatarsal fusion was performed for tarsometatarsal joint and accompanied secondary change was divided into subtypes and various bony reconstruction was carried out. The patients were evaluated with the AOFAS midfoot score and FFI. The average patient age was 60.2 years with 40.6 months follow-up. Fifty-four feet (80.6%) had been treated with realignment fusion. Twenty-six feet had first and second tarsometatarsal joint fusion, and 20 feet had first tarsometatarsal fusion only. Six subtypes were identified based on associated foot deformities: 1) in-situ without deformities (18%), 2) pes planovalgus (45%), 3) rockerbottom (15%), 4) cavus foot (1%), 5) hallux valgus (12%), and 6) hallux valgus with pes planovalgus or rockerbottom (9%). Plantar-medial closing-wedge resection was used in 10 feet to correct rockerbottom. For pes planovalgus, a medial sliding calcaneal osteotomy was done. Lateral column lengthening with medial sliding calcaneal osteotomy was done for severe pes planovalgus, and triple arthrodesis was done for rigid pes planovalgus. Hallux valgus was corrected with the Lapidus procedure (85.7%). Results: AOFAS midfoot scores improved from preoperative 34.1 points to postoperative 83.9 points (p<0.05). The Foot Function Index postoperatively also showed significant improvement (p<0.05), with a high satisfaction rate (86.6%). There were 29 complications, most commonly sesamoid pain. Conclusion: Idiopathic tarsometatarsal OA feet can be classified into six categories. Pes planovalgus feet should be treated with medial sliding calcaneal osteotomy, lateral column lengthening, or triple arthrodesis in addition to tarsometatarsal joint realignment fusion. Rockerbottom and hallux valgus deformities should also be addressed.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.26 no.3
• /
• pp.140-148
• /
• 2014

A storm surge barrier is a specific type of floodgate, designed to prevent a storm surge or spring tide from flooding the protected area behind the barrier. A surge barrier is almost always part of a larger flood protection system consisting of floodwalls, dikes, and other constructions. Surge barriers allow water to pass under normal circumstances but, when a (storm) surge is expected, the barrier can be closed. Among the various means of closing, buoyant flap typed storm surge barrier which was indicated by MOSE project in Italy is chosen for Masan bay protection, and the motion of the surge barrier under the action of storm surge and wave is examined using FLOW-3D, a computational fluid dynamics software analyzing various physical flow processes. Numerical result shows that storm surge barrier is successfully operated under wave height 3 m, and tidal range 2 m.

• Journal of the Korean Institute of Gas
• /
• v.11 no.1 s.34
• /
• pp.34-39
• /
• 2007

In this paper, the FEM result has been presented for a sealing safety between a valve packing and a valve seat during a open and close operation in a LPG cylinder. The sealing operation of a LPG valve is completed when the valve packing in which is made by a nylon-66 polymer is to stop a LP gas flow, which flows out from the outlet of a brass pipe in a LPG cylinder. The contact sealing mechanism of the valve may be classified by a flat contact of an unused valve packing and a circular groove contact of an used valve packing in a current LPG valve. Based on the FEM and experimental investigations the sealing force, 4.9 MPa for a flat contact mode of the unused valve packing is a little high compared to that of the used valve packing, which shows a circular groove contact geometry against a valve seat. But these sealing pressures for two contact modes are very low compared to the ultimate strenath 83 MPa of the nylon-66 and this may be designed with a excess strength of the valve.

• Journal of Korean Society of Transportation
• /
• v.32 no.3
• /
• pp.248-255
• /
• 2014

Though the Platform Screen Door System (PSD) has received a positive evaluation and is installed in all the Urban Railroad platforms, PSD is not installed in the Intercity Railroad platforms. The limitation of PSD in the Intercity Railroad platforms is due to the fact that first, various types of trains such as KTX, Saemaeul, Mugunghwa, and Nuriro stop at the platforms and their locations of the doors are different and secondly, they are not operated under ATO (automatic train operation). RPSD system currently under research and development, on the other hand, is based on the improved door that slides up and down and can be installed in any Intercity Railroad platform regardless of the length of the train, the location of doors, and the number of doors. This study considers the mechanism of RPSD, develops a manual open/close algorithm, and evaluates the function of RPSD. The results show that the manual open/close algorithm achieves a significant improvement in efficiency when provided with power supply.

• The Korean Journal of Applied Statistics
• /
• v.31 no.5
• /
• pp.667-675
• /
• 2018

When a financial time series consists of daily (closing) returns, traditional volatility models such as autoregressive conditional heteroskedasticity (ARCH) and generalized ARCH (GARCH) are useful to figure out daily volatilities. With high frequency returns in a day, one may adopt various multivariate GARCH techniques (MGARCH) (Tsay, Multivariate Time Series Analysis With R and Financial Application, John Wiley, 2014) to obtain intraday volatilities as long as the high frequency is moderate. When it comes to the ultra high frequency (UHF) case (e.g., one minute prices are available everyday), a new model needs to be developed to suit UHF time series in order to figure out continuous time intraday-volatilities. Aue et al. (Journal of Time Series Analysis, 38, 3-21; 2017) proposed functional GARCH (fGARCH) to analyze functional volatilities based on UHF data. This article introduces fGARCH to the readers and illustrates how to estimate fGARCH equations using UHF data of KOSPI and Hyundai motor company.

• Publications of The Korean Astronomical Society
• /
• v.23 no.1
• /
• pp.1-12
• /
• 2008

Understanding of the basic characteristics of an astronomical instrument is a prerequisite to obtaining reliable data from the instrument. We have analyzed more than 1,000 calibration images from the Fairchild 486 CCD (hereafter the Maidanak 4k CCD system) attached to the AZT-22 1.5m telescope at Maidanak Astronomical Observatory in Uzbekistan. The Maidanak 4k CCD system supports three readout modes through 1, 2, or 4 amplifiers. In most cases observers use 4-amplifier readout mode to save time. We have tested the stability and seasonal variation of zero levels and confirm that two quadrants of the images (Amp 1 & 2) show no appreciable seasonal variation. but the other two quadrants (Amp 3 & Amp 4) show an evident seasonal variation in the bias level. The Cryo Tiger, the cooling system used at the Maidanak 4k CCD system, maintains the CCD temperature at -108'E, and effectively suppresses the dark electrons. The mean value versus the variance plot of the flat images does not show the expected relation for an ideal Poisson noise distribution and this is attributed to the large variation in quantum efficiency between different pixels. In addition, we confirm that there is no appreciable difference in gain between readout amplifiers, but there is a large variation in quantum efficiency across CCD chip especially in U. Due to the finite length of shutter opening and closing time, the effective exposure time varies across the science images. We introduce two parameters to quantify the effect of this uneven illumination and present a method to remove these effects. We also present a method to remove the interference patterns appearing in the images obtained with longer wavelength filters and investigate the spatial variation of the point spread function.