• Transactions on Electrical and Electronic Materials
• /
• 제11권4호
• /
• pp.178-181
• /
• 2010

An automotive IC voltage regulator which consists of one-chip based on a metal-oxide semiconductor field effect transistor (MOSFET) is investigated experimentally with three types of packaging. The closed type is filled with thermal silicone gel and covered with a plastic lid on the MOSFET. The half-closed type is covered with a plastic case but without thermal silicone gel on the MOSFET. Opened type is no lid without thermal silicone gel. In order to simulate the high temperature condition in engine bay, the operating circuit of the MOSFET is constructed and the surrounding temperature is maintained at $100^{\circ}C$. In the overshoot the maximum was mainly found at the half-closed packaging and the magnitude is dependent on the packaging type and the surrounding temperature. Also the impressed current decreased exponentially during the MOSFET operation.

• 대한안전경영과학회지
• /
• 제17권3호
• /
• pp.363-370
• /
• 2015

In this paper, the control technique of the stepping motor using back electromotive force(B-EMF) without encoder is investigated. The stepping motor generally uses the rotary encoder to detect the rotor position. Since this method increases the cost and the motor configuration size, the new closed-loop control method applied for the B-EMF was implemented by using current detect circuit, AD-converter, and micro controller unit(MCU). The control loop of stepping motor became very simplified. The current change of stepping motor measured by the amplifier was measured and analyzed, when the missing step is occurred. Based on the data from current feedback, position errors were compensated and confirmed by using AD-converter.

• 전자공학회논문지SC
• /
• 제40권6호
• /
• pp.68-77
• /
• 2003

생체 임피던스 측정에 사용되는 프론트 엔드의 입력 커패시턴스를 상쇄시키며, 편하고, 작은 이득 여유로도 안정하게 동작하는 제안된 네가티브 커패시턴스 회로를 제안하였다. 기존의 회로를 사용하기 위해서는 적절한 이득-대역폭 적을 갖는 연산 증폭기를 선택해야 하는데 비하여 제안하는 회로는 광대역 연산 증폭기를 사용하므로 연산 증폭기의 선택이 쉽다. 또한 이득 여유가 귀환 커패시터에 직렬로 연결된 귀환 저항에 의하여 조절되므로 이득 여유를 가변 저항기로 튜닝할 수 있다. 제안된 회로의 입력 임피던스는 기존회로의 임피던스보다 2배 크며 네가티브 커패시턴스 회로를 채용하지 않았을 때에 비하여 40배 크다. 나아가서 제안된 회로의 폐루프 위상 응답은 기존의 회로와 네가티브 커패시턴스 회로를 채용하지 않았을 때에 비하여 좋다. 무엇보다도 이득 피킹이 발생하더라도 제안된 회로에서 이득 피킹의 주파수는 루프 이득이 최대로 되는 주파수 보다 높으므로, 이득 여유가 이득 피킹의 영향을 거의 받지 않는다. 따라서 제안된 회로는 매우 작은 이득 여유로도 안정하게 동작할 수 있다.

• 한국항공운항학회지
• /
• 제13권4호
• /
• pp.92-99
• /
• 2005

A closed-circuit type wind tunnel is designed, which has a test section with the dimensions $1.2(W){\times}1.2(H){\times}3.4(L)$. A subsonic wind tunnel is designed to improves educational circumstances and promote ground tests. It is constituted of an exchangeable test section, first and second diffusers, a fan, a settling chamber, a contraction, and 4 corners. The maximum velocity in the test section is 70m/s and the contraction ratio is 6.25:1. Input power in the wind tunnel is about 96.1 kw (128.8 hp) and its energy ratio is 3.89. It has the dimension of about $7.4(W){\times}3.6(H){\times}21.7m(L)$. The wind tunnel designed in this investigation will be an effective educational and investigational equipment.

• 한국지진공학회논문집
• /
• 제17권5호
• /
• pp.219-225
• /
• 2013

This work examines the feasibility for estimating existing tensile stress on a stressed wire using the permeability of magnetic flux. A closed magnetic circuit has been constructed to induce magnetic flux inside a steel wire. With different tension stress levels on a wire, the permeability of magnetic flux on the wire has been measured. Two different experimental case studies have been conducted for the examination of sensitivity of permeability of magnetic flux on the stressed wire. One is a varying-length stress test, and the other is a fixed-length stress test. The results show that the permeability of magnetic flux in the varying-length stress test is inversely proportional to the applied stress, while the permeability in the fixed-length stress test is linearly proportional to the applied stress on the stressed wire. It is thus expected that the permeability of magnetic flux on a wire can be a promising indicator for the inspection of its tensile stress.

• 상하수도학회지
• /
• 제27권6호
• /
• pp.723-730
• /
• 2013

Due to the event of hazardous chemical injection into a water storage tank in Hongseong, Chungcheongnam-do in 2012, the Korean Ministry of Environment has revised the enforcement rules of the Water Supply and Waterworks Installation Act to install surveillance equipments such as closed-circuit television(CCTV). However, the enforcement rules still do not provide concrete provision for installation of physical security equipments. Thus we studied vulnerability of small-scale water supplies in Korea and developed guidelines for the physical security system of the facilities. The guidelines include selection and recommendation of the physical security approaches and measures to detect, delay and response to the presence of an intruder in small-scale water supplies. The security features include protection utilities(e.g., fencing and fence topping), exterior intrusion detectors and alarms, locks and padlocks, surveillance utilities(e.g., CCTV), and others.

• 대한전자공학회논문지SP
• /
• 제46권2호
• /
• pp.24-29
• /
• 2009

음원 추정 시스템은 로봇, 화상회의, CCTV(Closed-circuit television) 시스템에 쓰인다. 이러한 음원 추정 시스템은 사람을 대상으로 하며 사람이 말하는 동안 여러 개의 음성 데이터 프레임을 입력받을 수 있다. 본 논문에서는 입력된 음성 데이터 프레임으로부터 정확한 각도를 계산 할 수 있는 음성 데이터 프레임을 선별하여 각도 추정 오차를 줄이는 방법에 대해서 제안한다. 또한 선별된 데이터를 각도로 변환한 후 메디언 필터를 적용하여 음원 추정 시스템의 오차를 줄일 수 있다. 제안된 시스템을 이용하여 실험한 후 각도 추정 오차 평균이 31%감소함을 보인다.

• 중소기업융합학회논문지
• /
• 제6권3호
• /
• pp.85-91
• /
• 2016

이 논문의 목적은 낮은 화소 수나 어두운 렌즈를 사용하는 CCTV는 자동차의 번호판이나 범죄자를 인식하기 어렵기 때문에 화소수를 높이고 밝은 렌즈를 사용하기 위함이다. 구면수차와 왜곡수차를 줄이기 위하여 2매의 비구면 렌즈를 적용하고 300만 화소에 적절한 줌렌즈의 설계와 이에 의한 특성을 제시하였다. 초점거리는 6-60mm를 적용하였고 F수는 1.2를 구현하였다. 적외선 보정을 실시하여 주야 초점거리가 같도록 설계하였다. 결과적으로 이 규격은 6-60mm 10배줌 렌즈의 규격 중 가장 우수하다. 이 렌즈를 적용한다면 50m거리에서 얼굴이나 차번호의 인식이 가능하다. 향후 이 렌즈의 자동화 구현이 필요하다.

• 전기학회논문지
• /
• 제68권1호
• /
• pp.199-206
• /
• 2019

Recently, an expansion of safety facilities has been widely applied to effectively manage the safety of train operation due to increase of the high-speed section of the general railway and the introduction of high-speed train. Accordingly, performance improvement, upgrading and high reliability of existing safety devices are required. the dragging detector, one of the safety devices, is an analogue system that consists of closed circuit with an electric current flows and operates when the closed circuit is opened by the impact of the dragging object. Such method has unreasonable problem that should be replaced after being detected. It is need to replace with an automatic return type dragging detector which is easy to maintain. In addition, it is necessary to develop a dragging detector that applicable to general railway and urban railway including high-speed railway, in accordance with the speeding up and densification of trains, although it is currently applied only to high-speed railway. In this paper, we propose an automatic return type dragging detector which has versatility and excellent maintainability with digital sensor and real time monitoring.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권6호
• /
• pp.3238-3257
• /
• 2019

Closed-circuit television (CCTV) technology continuously captures and stores video streams. Users are typically required by policy to store all the captured video for a certain period. Accordingly, increasing the number of CCTV operation cycles and photographing positions expands the amount of data to be stored. However, expanding the available storage space for video data incurs increased costs. In recent years, this problem has been addressed with cloud storage solutions, which enable multiple users and devices to access and store data simultaneously. However, because of the large amount of data to be stored, a vast storage space is required. Consequently, cloud storage administrators need a way to store data more efficiently. To save storage space, deduplication technology has been proposed to prevent duplicate storage of the same data. However, because cloud storage is hosted on remote servers, data encryption technology must be applied to address data exposure issues. Although deduplication techniques for encrypted data have been studied, there have been various security vulnerabilities. We attempted to solve this problem by addressing various issues such as poison attacks, property forgery, and ownership management while removing the redundant data and handling the data more securely.