• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.418-429
• /
• 2018

This paper studies the decentralized position/force control problem for constrained reconfigurable manipulator without torque sensing. A novel joint torque estimation scheme that exploits the existing structural elasticity of the manipulator joint with harmonic drive model is applied for each joint module. Based on the estimated joint torque and dynamic output feedback technique, a decentralized position/force control strategy is presented. In order to solve the problem of controller parameter perturbation, the non-fragile robust technique is introduced into the dynamic output feedback controller. Subsequently, the stability of the closed-loop system is proved using the Lyapunov theory and linear matrix inequality (LMI) technique. Finally, two 2-DOF constrained reconfigurable manipulators with different configurations are applied to verify the effectiveness of the proposed control scheme in numerical simulation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.11
• /
• pp.2066-2072
• /
• 2010

In this paper, a variable structure dynamic output feedback controller with an transformed sliding surface is designed for the improved robust control of a uncertain system under unmatched system uncertainty, matched input matrix uncertainty, and disturbance satisfying some conditions. This paper is extended from the results of the static output feedback VSS in [9]. To effectively remove the reaching phase problems, an initial condition of the dynamic output is determined. The previous some limitations on the dynamic output feedback variable structure controller is overcome in this systematic design. A stabilizing control is designed to generate the sliding mode on the predetermined sliding surface S=0 and as a results the closed loop exponential stability is obtained and proved together with the existence condition of the sliding mode on S=0 for all unmatched system matrix uncertainties. To show the usefulness of the algorithm, a design example and computer simulations are presented.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.744-747
• /
• 2005

This research studied 6-Axes Articulated Robot Manipulator's gain Tuning in consideration of dynamic. First of all, search fur proportional gain of velocity control loop by dynamic signal analyzer. Proportional gain of velocity control loop is connected to dynamic signal analyzer. Next Select free Proportional Gain value. And Select amplitude X of sinusoidal properly so that enough Velocity Feedback Signal may be paid as there is no group to utensil department. Next step, We can get Bode Diagram of Closed loop transfer function response examination in interested frequency. Integral calculus for gain of velocity loop is depended on integral calculus correction's number. We can obtain open loop transfer function by integrator. And we can know bode diagram's special quality from calculated open loop transfer function. With this, Velocity Control Loop's Parameter as inner loop is controlled. Next In moving, when vibration occurs, it controls notch filter. And finally, we have to control fred-forward filter parameter for elevation of control performance.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.2
• /
• pp.83-91
• /
• 2007

This experiment studied the change in a human's control of his or her static posture by analyzing the stabilogram diffusion and, by using the said study, evaluated the control ability of different groups with different experiences. The postures had a rising requirement of heel-rise according to three conditions: heel-toe, ball, toe; the groups were divided into dance major student and non-dance majors. The results of the critical points according to posture did not show a direct relation with the change in postures that had a rising requirement of heel-rise. The diffusion coefficient(D) had greater stochastic activity for short-term regions that utilize open-loop controls without feedback than for long-term regions that used closed-loop controls with feedback to maintain balance. The directional results of the body undergoing disturbance showed that A/P direction's diffusion coefficient (D) was larger than that of M/L direction. Both feet's planar diffusion coefficients were a linear combination of the diffusion coefficients calculated for the x and y axis. In studying the different abilities to control posture between a dance major student and a non-dance majors, a comparison of open-loop control's diffusion coefficient(D) was effective, and dance major student had superior control ability to that of non-dance majors.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.4
• /
• pp.313-319
• /
• 2000

As the interest of flexible manufacturing systems and computer integrated manufacturing systems increase, the distribution of centralized control systems using industrial control networks is getting more attention. In this paper, we investigate the rate-based traffic control of industrial control networks to improve the performance regarding the throughput, fairness, and error rates. Especially, we consider the protocol of Lon-$Works^{(TM)}$ which consists of all OSI 7-layers and supports various communication media at a low cost. Basically, the proposed rate-based traffic control system is closed loop by utilizing the feedback channel errors, which shows improved performance when compared with other industrial control networks commonly operated in open loop. To this end, an additional network node called monitoring node is introduced to check the channel status without increasing the channel load. The Proposed control loop is in effect whenever the feedback channel error becomes greater than an admittable value. We demonstrate the improved performance of the controlled network system in view of throughput and fairness measures by implementing the lab-scale network system based on LonWorks and through the experimentation upon it.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.5
• /
• pp.697-705
• /
• 2011

In this paper, a closed-loop system constructed with a linear plant and nonlinearity in the feedback connection is considered to argue against its planar orbital stability. Through a state space approach, a main result that presents a sufficient stability criterion of the limit cycle predicted by solving the harmonic balance equation is given. Preliminarily, the harmonic balance of the nonlinear feedback loop is assumed to have a solution that determines the characteristics of the limit cycle. Using a state-space approach, the nonlinear loop equation is reformulated into a linear perturbed model through the introduction of a residual operator. By considering a series of transformations, such as a modified eigenstructure decomposition, periodic averaging, change of variables, and coordinate transformation, the stability of the limit cycle can be simply tested via a scalar function and matrix. Finally, the stability criterion is addressed by constructing a composite Lyapunov function of the transformed system.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1005-1008
• /
• 1996

We consider the interval of a gain within which it is guaranteed that a feedback control system is stable. This paper presents the condition under which either a unity feedback control system is stable for a connected gain interval with a proportional compensator cascaded with an open loop forward transfer function. By the connected interval we mean that all the numbers between any two numbers in the connected interval belongs to the connected interval. The condition may be described by a frequency inequality in terms of the denominator and/or numerator of the closed loop transfer function. We also consider the conditions for the discrete-time control systems and the time delay continuous-time control systems. We show that this condition cannot be extended for the transfer function having complex coefficients via a counterexample.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.2A
• /
• pp.96-101
• /
• 2003

This paper is on the user equipment (UE) side time tracker design and implementation of the wideband code division multiple access (WCDMA) system. The time tracker is constructed as a second order closed loop including time error detector (TED), loop filter (LP), numerically controlled oscillator (NCO), and sample selector (SS). Through the simulation, we found the gain of the TED as a function of the CPICH power contribution to the total transmission power of the base station. Also we derived the transfer function of the loop and the BER versus DPCH power relationships where timing offsets and loop noise bandwidths are used as parameters. In the curve, we can conclude that there are appropriate loop noise bandwidths according to the given environments for the better performance.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.8
• /
• pp.727-731
• /
• 2000

This paper presents a new practical autopilot design approach to acceleration control for tail-controlled STT(Skid-to-Turn) missiles. The approach is novel in that the proposed parametric affine missile model adopts acceleration as th controlled output and considers the couplings between the forces as well as the moments and control fin deflections. The aerodynamic coefficients in the proposed model are expressed in a closed form with fittable parameters over the whole operating range. The parameters are fitted from aerodynamic coefficient look-up tables by the function approximation technique which is based on the combination of local parametric models through curve fitting using the corresponding influence functions. In this paper in order to employ the results of parametric affine modeling in the autopilot controller design we derived a parametric affine missile model and designed a feedback linearizing controller for the obtained model. Stability analysis for the overall closed loop sys-tem is provided considering the uncertainties arising from approximation errors. the validity of the proposed modeling and control approach is demonstrated through simulations for an STT missile.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.10
• /
• pp.827-833
• /
• 2012

The receiver performance is degraded by nonlinear memory problem in communication system. The pre-distorter techniques are an effective technique to compensate for the nonlinear distortion of the HPA without memory effects. However, memory effect of HPA can no longer be ignored when data signal is transmitted in high speed. Many adaptive pre-distorter schemes have been studied to compensate for memory effect problem of HPA in transmitter. The complexity and cost of satellite will increase when using adaptive pre-distorter in satellite communication system. In this paper, we propose receiver feedback closed loop pre-distortion technique in order to compensate for nonlinear problem of HPA with memory problem. The purpose of this paper is to reduce complexity and cost of satellite design by using only pre-distorter at terrestrial station.