• The Journal of the Acoustical Society of Korea
• /
• 제20권4E호
• /
• pp.52-60
• /
• 2001

This paper describes real time implementation of subband sound localization system on a floating-point DSP TI TMS320C31. The system determines two dimensional location of an active speaker in a closed room environment with real noise presents. The system consists of an two microphone array connected to TI DSP hosted by PC. The implemented sound localization algorithm is Subband CPSP which is an improved version of traditional CPSP (Cross-Power Spectrum Phase) method. The algorithm first split the input speech signal into arbitrary number of subband using subband filter banks and calculate the CPSP in each subband. It then averages out the CPSP results on each subband and compute a source location estimate. The proposed algorithm has an advantage over CPSP such that it minimize the overall estimation error in source location by limiting the specific band dominant noise to that subband. As a result, it makes possible to set up a robust real time sound localization system. For real time simulation, the input speech is captured using two microphone and digitized by the DSP at sampling rate 8192 hz, 16 bit/sample. The source location is then estimated at once per second to satisfy real-time computational constraints. The performance of the proposed system is confirmed by several real time simulation of the speech at a distance of 1m, 2m, 3m with various speech source locations and it shows over 5% accuracy improvement for the source location estimation.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2009년 춘계학술발표대회 논문집
• /
• pp.113-117
• /
• 2009

By statistics in August, 2007, currently Korean motors registration number broke through 16 million units. The demand of motors is being increased as time goes on and the demand of parking lot within apartment complex is increased together. Therefore, it is inevitable to expand underground parking lots. Underground parking lots have relatively weaker environment than the ground and physical/psychological problems as distance far away from the main building, fear for vehicle damage and crimes, impure air, darkness and closed feeling take place. Underground parking lots also occupy a lot of area ratio within apartment complex and have a lot of effects on other facilities. Therefore, underground parking lots are neglected for all that underground parking lots have deep relations with satisfaction for public space within apartment complex. Accordingly, the purpose of the study is to make reference materials when underground parking lots are planned by grasping satisfaction of underground parking lots through inhabitants'mental survey and surveying preferential location and requirements of parking lots.

• Structural Engineering and Mechanics
• /
• 제5권3호
• /
• pp.257-268
• /
• 1997

The elastic deflections and Euler buckling loads are investigated for a class of tapered and initially curved cantilevered beams subjected to loading at the tip. The beam's width increases linearly and its depth decreases linearly with the distance from the fixed end to the tip. Unloaded, the beam forms a circular are perpendicular to the axis of bending. The beam's deflection responses, obtained by solving the differential equations in closed form, are presented in terms of four nondimensional system parameters: taper ratio ${\kappa}$, initial shape ratio ${\Delta}_0$, end load ratio f, and load angle ${\theta}$. Laboratory measurements of the Euler buckling loads for scale models of tapered initially straight, corrugated beams compared favorably with those computed from the present analysis. The results are applicable to future designs of the end structures of highway guardrails, which can be designed to give the appropriate balance between the capacity to deflect a nearly head-on vehicle back to its right-of-way and the capacity to buckle sufficiently that penetration of the vehicle may be averted.

• 수산해양교육연구
• /
• 제28권3호
• /
• pp.872-880
• /
• 2016

The purpose of this study is to find the research trends relating to flipped learning through keyword network analysis. For investigating this topic, final 100 papers (removed due to overlap in all 205 papers) were selected as subjects from the result of research databases such as RISS, DBPIA, and KISS. After keyword extraction, coding, and data cleaning, we made a 2-mode network with final 202 keywords. In order to find out the research trends, frequency analysis, social network structural property analysis based on co-keyword network modeling, and social network centrality analysis were used. Followings were the results of the research: (a) Achievement, writing, blended learning, teaching and learning model, learner centered education, cooperative leaning, and learning motivation, and self-regulated learning were found to be the most common keywords except flipped learning. (b) Density was .088, and geodesic distance was 3.150 based on keyword network type 2. (c) Teaching and learning model, blended learning, and satisfaction were centrally located and closed related to other keywords. Satisfaction, teaching and learning model blended learning, motivation, writing, communication, and achievement were playing an intermediary role among other keywords.

• 한국수산과학회지
• /
• 제51권3호
• /
• pp.298-304
• /
• 2018

A single specimen of Gymnothorax pseudothyrsoideus (424.0 mm TL) belonging to the family Muraenidae, order Anguilliformes, was collected from Jeju Island, Korea, for the first time. The specimen is characterized by jaws closing completely, canine teeth on jaws, teeth not exposed when mouth is closed, ovoid posterior nostril, and body color ranging from yellowish brown to brownish with small dark spots aggregating to form larger spots that from approximately four irregular rows along the body. A comparison of mitochondrial DNA 16S rRNA sequences indicated that this specimen corresponds well with G. pseudothyrsoideus (K2P distance, d=0.002) but differs from other Gymnothorax species (11.9-13.7%). Therefore, the new Korean name "Geu-mul-nun-gom-chi" is proposed for the species G. pseudothyrsoideus.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권7호
• /
• pp.359-364
• /
• 2000

This paper is introducing a newly developed spark-gap switch with dual trigger system, into which the current from the voltage source is injected along with the test sequence during the synthetic testing of high voltage circuit-breaker. The currently-used spark gap switch is narrow in operating range due to the use of the method of triggering energy being injected by single way. As a result, the frequent happening of misoperation has greatly reduced the test quality and test efficiency and has required the cost of maintenance excessively. In this study, accordingly, in order to basically remove these problems, another triggering system is installed to the opposite direction on the existing triggering system; attaching the same time and the same rising time of pulse wave as on the existing system, so that at a comparatively trigger gap distance from the main electrode(the gap can be operated at 60% of self-break voltage, while at 80% in the current system), the main electrode has been enabled to be closed by the development of spark gap switch with dual trigger system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권11호
• /
• pp.5209-5228
• /
• 2016

Device-to-device (D2D) communication underlaying cellular networks can bring significate benefits for improving the performance of mobile services. However, it hinges on elaborate resource sharing scheme to coordinate interference between cellular users and D2D pairs. We formulate a joint mode selection, link allocation and power control optimization problem for D2D communication sharing uplink resources in a multi-user cellular network and consider the efficiency and the fairness simultaneously. Due to the non-convex difficulty, we propose a three-step scheme: firstly, we conduct mode selection for D2D pairs based on a minimum distance metric after an admission control and obtain some cellular candidates for them. And then, a cellular candidate will be paired to each D2D pair based on fairness. Finally, we use Lagrangian Algorithm to formulate a joint power control strategy for D2D pairs and their reused cellular users and a closed-form of solution is derived. Simulation results demonstrate that our proposed algorithms converge in a short time. Moreover, both the sum rate of D2D pairs and the energy efficiency of cellular users are improved.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 추계학술발표회 논문집
• /
• pp.99-104
• /
• 2004

Recently, the old surveying method for acquiring surveying-geo information results had a low economic efficiency and a low dependence of precision because it took much times and high costs. So, we acquired law data by execution of control surveying through Static positioning of DGPS(Ashtech). It is computed plainmetric(X, Y) positioning through postprocessing by Prism S/W. And we computed height(Z) through control surveying by ring-closed leveling surveying. After control surveying execution, we built DEM(Digital Elevation Model) using LDT S/W and accuracy 3D detail surveying by EDM(Electronic Distance Measurement) surveying. The purpose of this study was to yield automated digital mapping and the automated amount of materials using ahead data. The conclusions were as follows; First, we built the automated amount of materials system and got high efficiency about personnel, times and precision. Second, when, people precisely positioned on railroads of a high-speed railroad and used GPS surveying, the result was permitted. Finally, it was possible to draw automated profile and cross-section using the 3D terrain model build with the DEM technique.

• 한국지능시스템학회논문지
• /
• 제18권1호
• /
• pp.60-65
• /
• 2008

본 논문에서는 강인 디지털 제어기를 통한 스마트 스페이스의 안정도에 대해 논의하고자 한다. 제안된 제어기 설계 방법은 지능형 디지털 재 설계 기법을 적용하는 것이다. 좀 더 구체적으로, 불확실성 및 비선형성이 포함된 아날로그 시스템을 Takagi-Sugeno 퍼지 모델을 사용하여 나타낸다. 그리고 전역적 지능형 디지털 재 설계를 위하여 해당 문제를 볼록 최적화 관점으로 변환 한 후, 에러가 가질 수 있는 놈의 영역을 최소화하여 상태 정합을 이루고자 하였다. 전역적 접근을 통해 정리된 식은 선형 행렬 부등식으로 나타나게 된다. 마지막으로, 설계된 제어기를 HVAC (Heating, ventilating, and air conditioning) 시스템에 적용함으로써 효율성을 입증하고자 한다.

• Journal of the Optical Society of Korea
• /
• 제6권3호
• /
• pp.121-127
• /
• 2002

The operating principal of a ring laser gyroscope depends on the phase difference for the counter-propagating waves within a closed path. The reflecting mirrors mounted on the monoblock form the traveling waves. The manufacturing accuracy of the monoblock influences the traveling path of ray, the sensitivity of laser resonator for misalignments, and diffraction losses. A 3 $\times$ 3 ray transfer matrix was derived for optical components with centering and squaring errors in a ring resonator. The matrix can be utilized to predict the optical ray paths on the basis of the manufacturing errors of the monoblock as well as the misalignment of mirrors. Then the distance and orientation (o. slope) at the arbitrary plane inside the resonator along the ideal optical path can be calculated from the chain multiplication of the ray transfer matrix for each optical component in one round trip. We also show that the counter-propagating rays In a ring resonator with errors does not coincide in each round trip, which results in gain difference between two beams, and how these errors can be adjusted through the alignment procedure. Finally this 3 $\times$ 3 ray matrix formalism can be used to calculate the beam size and its displacement from the optical axis and the deviation at the diaphragm.