• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.92-97
• /
• 2002

There are a lot of roots of errors in an motion of the optical pick-up actuator being one of the most significant components in a CD-ROM drive. Most of the studies recently performed have a tendency to seek for the causes from an actuator itself. This paper present the dynamic characteristics of an actuator affected by the motion of a feeding deck. The feeding system is modeled as a rigid body with eight degree-of-freedom. Using Largrange's equation, we derive the linear equations of motion with respect to the rectangular coordinate. We found the fact that the ranges of the natural frequencies of a feeding deck and an actuator are close to each other. And the time responses are also computed by the Newmark method and Runge-Kutta method.

• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.521-526
• /
• 2000

Experimental study is conducted to clarify pressure variation of the passenger cabin of conventional train. These pressure variation may give rise to the ear-discomfort. Generally ear-discomfort has been considered as a problem related to high speed train. Because there is also a good progress to speed-up for conventional line, this isn't only a phenomena related to high speed train any longer. In this study, tile pressure variation of interior, gangway and exterior of saemaeul passenger car is measured using the atmospheric pressure sensors in Honam line. From the results of experiment, the pressure variation per second almost close in upon the limitation in the case of Noryong tunnel. Therefore, to accomplish speed-up for conventional train, it may be necessary to study a serial ventilating and the airtightness of carbody.

• Journal of Agricultural Extension & Community Development
• /
• v.17 no.4
• /
• pp.655-684
• /
• 2010

The objectives of this study were to review on the characteristics of the Agricultural Research-Extension Systems in the USA, Japan, and the Netherlands, and to draw up its implications on Korean agricultural extension system. This study was conducted by literature reviews. Based on the reviews, the following implications and recommendations should be considered at national and local level for improvement of agricultural extension system in Korea; (1) a systemic approach on the linkages of agricultural research, extension, and farmer education, (2) strengthening on-farm utilization of newly developed agricultural technology so as to promote agricultural research and development, (3) strategic partnership with agricultural administration, (4) close networking with stake-holders, (5) setting up the flexible organizational structure for carry out agricultural extension programs, (6) integration of agricultural extension service domain, (7) introduce a IPM(integrated performance management) system, (8) establish a long-term super-vision and strategic management, (9) setting up the customer-centered extension system.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.17 no.9
• /
• pp.799-807
• /
• 2005

The flow characteristics and the heat transfer rate on a surface by the interaction of a pair of vortices are studied numerically. To analyze the common flow up produced by vortex generators in a rectangular channel flow, the pseudo-compressibility viscous method is introduced into the Reynolds-averaged Navier-Stokes equation for 3-dimensional unsteady, incompressible viscous flows. To predict turbulence characteristics, a two-layer $k-\varepsilon$ turbulence model is used on the flat plate 3-dimensional turbulence boundary The computational results predict accurately Reynolds stress, turbulent kinetic energy and flow field generated by the vortex generators. The numerical results, such as thermal boundary layers, skin friction characteristics and heat transfers, are also reasonably close to the experimental data.

• Journal of The Korean Astronomical Society
• /
• v.44 no.4
• /
• pp.109-113
• /
• 2011

In current microlensing planet searches that are being carried out in a survey/follow-up mode, the most important targets for follow-up observations are lensing events with high magnifications resulting from the very close approach of background source stars to the lens. In this paper, we investigate the dependence of the sensitivity to planets on detailed properties of high-magnification events. From this, it is found that the sensitivity does not monotonically increase as the impact parameter between the lens and the source trajectory decreases. Instead, it is roughly the same for events with impact parameters less than a certain threshold value. It is also found that events involving main-sequence source stars are sensitive to planets in a much wider range of separation and mass ratio, than those events involved with giant source stars. Based on these results, we propose observational strategies for maximal planet detections considering the types of telescopes available for follow-up observations.

• Nuclear Engineering and Technology
• /
• v.50 no.2
• /
• pp.259-267
• /
• 2018

Focused ion beam-scanning electron microscope and electron backscattered diffraction examinations were conducted in the center of a $73\;GWd/t_U\;UO_2$ fuel. They showed the formation of subdomains within the initial grains. The local crystal orientations in these domains were close to that of the original grain. Most of the fission gas bubbles were located on the boundaries. Their shapes were far from spherical and far from lenticular. No interlinked bubble network was found. These observations shed light on previous unexplained observations. They plead for a revision of the classical description of fission gas release mechanisms for the center of high burn-up $UO_2$. Yet, complementary detailed observations are needed to better understand the mechanisms involved.

• Transactions of Materials Processing
• /
• v.10 no.1
• /
• pp.53-58
• /
• 2001

Set-up reference values, used in determining the optimum downcoiling tension, we experimentally verified in this study. During the actual downcoiling, the strip suffers both tension and bending force through the rotation of mandrel. Therefore, simulative test which can measure both tension and bending resistance of strip was performed to estimate set-up reference value for strip tension during downcoiling operations. The values obtained from the simulative test were correlated with the yield stress which has conventionally been used as reference values for downcoiling tension. The correlative analysis showed that the yield stress of strip can be a good reference value for downcoiling tension. Furthermore, the bending load also shows strong correlation with simulated values due to the close relationship between yield stress and bending load.

• Journal of Korean Society of Transportation
• /
• v.32 no.3
• /
• pp.248-255
• /
• 2014

Though the Platform Screen Door System (PSD) has received a positive evaluation and is installed in all the Urban Railroad platforms, PSD is not installed in the Intercity Railroad platforms. The limitation of PSD in the Intercity Railroad platforms is due to the fact that first, various types of trains such as KTX, Saemaeul, Mugunghwa, and Nuriro stop at the platforms and their locations of the doors are different and secondly, they are not operated under ATO (automatic train operation). RPSD system currently under research and development, on the other hand, is based on the improved door that slides up and down and can be installed in any Intercity Railroad platform regardless of the length of the train, the location of doors, and the number of doors. This study considers the mechanism of RPSD, develops a manual open/close algorithm, and evaluates the function of RPSD. The results show that the manual open/close algorithm achieves a significant improvement in efficiency when provided with power supply.

• Journal of Chest Surgery
• /
• v.54 no.5
• /
• pp.361-368
• /
• 2021

Background: In general, a 2-cm surgical margin is recommended for limited resection to obtain equivalent oncologic outcomes to lobectomy for lung cancer. This study aimed to examine the patterns of recurrence and prognostic factors for recurrence in patients with a close parenchymal resection margin. Methods: From January 2009 to April 2017, 156 patients with stage I lung cancer who underwent segmentectomy with a close resection margin (<2 cm) were enrolled. Recurrence-free survival and overall survival were assessed. In addition, predisposing factors for recurrence were evaluated. Results: The mean tumor size was 1.7±0.8 cm and the parenchymal resection margin was 1.1±0.6 cm. Recurrence developed in 17 (10.7%) of the 156 patients, and the 5-year recurrence-free survival rate was 88.9%. Distant metastasis (7.7%) was the predominant recurrence pattern. The isolated local recurrence rate was 1.9%. Multivariate Cox regression analysis revealed that age, tumor size, mediastinal lymph node dissection, postoperative complications, and histologic type were significant predisposing factors for recurrence. However, parenchymal margin distance did not significantly affect the long-term prognosis. Conclusion: Segmentectomy with a close resection margin for early-stage lung cancer in selected patients resulted in acceptable recurrence and survival. However, patients with tumors larger than 2 cm, squamous cell carcinoma histology, and insufficient mediastinal evaluation should be carefully followed up for recurrence.

• Nuclear Engineering and Technology
• /
• v.52 no.7
• /
• pp.1396-1408
• /
• 2020

Filtered containment venting system (FCVS) is one of the severe accident mitigation systems designed to release containment pressurization to maintain its integrity. The thermal-hydraulic behaviors in FCVSs are important since they affect the operation characteristics of the FCVS. In this study, a representative FCVS was modeled by RELAP5/Mod3.3 code, and the Station BlackOut (SBO) was chosen as an accident scenario. The thermal-hydraulic behaviors of an FCVS during long-term operation with two venting strategies (open-and-close strategy, open-and-non-close strategy) and the sensitivity analysis of important parameters were investigated. The results show that the FCVS can operate up to 250 h with a periodic open-and-close strategy during an SBO. Under the combined effects of steam condensation and water evaporation, the solution inventory in the FCVS increases during the venting phase and decreases during the intermission phase, showing a periodic pattern. Under this condition, the appropriate initial water level is 3-4 m; however, it should be adjusted according to the environment temperature. The FCVS can accommodate a decay heat power of 150-260 kW and may need to feed water for a higher decay heat power or drain water for a lower decay heat power during the late phase. The FCVS can function within an opening pressure range from 450 kPa to 500 kPa and a closing pressure range between 250 kPa and 350 kPa. When the open-and-non-close strategy is adopted, the solution inventory increases quickly in the early venting phase due to steam condensation and then decreases gradually due to the evaporation of water; drying-up may occur in the late venting phase. Decreasing the venting pipe diameter and increasing the initial water level can mitigate the evaporation of the scrubbing solution. These results are expected to provide useful references for the design and engineering application of FCVSs.