• Steel and Composite Structures
• /
• v.19 no.6
• /
• pp.1561-1580
• /
• 2015

No significant improvement has been observed on the seismic performance of the ordinary steel reinforced concrete (SRC) columns compared with the reinforced concrete (RC) columns mainly because I, H or core cross-shaped steel cannot provide sufficient confinement for core concrete. Two improved SRC columns by constructing with new-type section steel were put forward on this background: a cross-shaped steel whose flanges are in contact with concrete cover by extending the geometry of webs, and a rotated cross-shaped steel whose webs coincide with diagonal line of the column's section. The advantages of new-type SRC columns have been proved theoretically and experimentally, while construction measures and seismic behavior remain unclear when the new-type columns are joined onto SRC beams. Seismic behavior of SRC joints with new-type section steel were experimentally investigated by testing 5 specimens subjected to low reversed cyclic loading, mainly including the failure patterns, hysteretic loops, skeleton curves, energy dissipation capacity, strength and stiffness degradation and ductility. Effects of steel shape, load angel and construction measures on seismic behavior of joints were also analyzed. The test results indicate that the new-type joints display shear failure pattern under seismic loading, and steel and concrete of core region could bear larger load and tend to be stable although the specimens are close to failure. The hysteretic curves of new-type joints are plumper whose equivalent viscous damping coefficients and ductility factors are over 0.38 and 3.2 respectively, and this illustrates the energy dissipation capacity and deformation ability of new-type SRC joints are better than that of ordinary ones with shear failure. Bearing capacity and ductility of new-type joints are superior when the diagonal cross-shaped steel is contained and beams are orthogonal to columns, and the two construction measures proposed have little effect on the seismic behavior of joints.

• The Research Journal of the Costume Culture
• /
• v.17 no.6
• /
• pp.939-946
• /
• 2009

This study is to classify the shape of the body by means of the drop value of the middle-age women. Drop value is based on the circumstances of the body deciding the dimentions of the clothes. Therefore, the study based on the drop value seems to decided the measurement of the clothes in making mass production of ready made clothes. In order to put measure items on this study of the value on 'The fifth survey of body measure of Korean', select 785 people in middle-aged women aged from 40 to 59. And considering the characteristic of upper-drop and lower-drop, and swelling belly by accumulated fat, selected five items(Bust Circumstance - Waist Circumstance, Hip Circumstance - Waist Circumstance, Hip Circumstance - Bust Circumstance, Waist Circumstance(Omphalion) - Waist Circumstance, Hip Circumstance - Waist Circumstance(Omphalion)). The result of the study is summarized as follows. Type 1, M type of the body showed the distribution of 32.5% and belonged to low body development style. The line of human body is the nearest of the four bodies in middle-age woman out of whole shapes of 4 types and the line of human body is close to middle-age woman. Type 2, X type of the body showed the distribution of 40.8% and the line of human body remarkably showed. Type 3, H type of the body showed the distribution of 12.4% and the line of human body appears least. This group was larger than any other group in having more fat in the belly above the circumstance of the hip than other groups. Type 4, Y type of the body showed the distribution of 14.4%. This type was upper half of body development style, waist was slender, and there was seldom the bend around the circumstance of belly and hip.

• Korean Institute of Interior Design Journal
• /
• v.15 no.2 s.55
• /
• pp.150-157
• /
• 2006

Founded on a close relationship between exhibition scenarios and media, this study was conducted 1) to establish exhibition arrangement types by using three analytical indicators, such as arrangement types of exhibition, groupings of similar exhibition media, and exhibition density; and 2) to demonstrate the importance of considering the characteristics of exhibition arrangement types by using viewing behavior codes as a major analytical indicator. The following three types were investigated in this research: First, the Independent type (Type C) was found to be strongly influenced by architectural and spatial forms, especially by low exhibition density and high visual information. Also, compared with the Wall Dominant type, low number of viewing behavior codes and distribution was found even though there were high correlations among viewing behavior codes. This is assumed to be due to low exhibition density. Second, the Wall Dominant type (Type A) was found to be not influenced by architectural and spatial forms. This is because space is planned and restructured centering on the wall type showcases. At the planning stage of exhibition, it is easy to divide or combine space according to the contents and structure of exhibition scenarios. Compared with the Independent type, low correlations were found among viewing behavior codes. This is due to low participation or manipulation exhibitions. However, this implies that more active viewing behaviors can be induced if appropriate exhibition techniques and arrangement methods are used for each exhibition content. Third, the Independent Dominant type (Type B) was found to confuse visitors in selecting routes by displaying too many exhibits at a limited space in a disorderly fashion. It failed to attract visitors to the main exhibition area, where a big space is formed in the center. Visitors were found to view exhibits that are arranged near the major traffic line.

• Journal of Korean Association for Spatial Structures
• /
• v.20 no.4
• /
• pp.83-91
• /
• 2020

In this study, a tuned mass damper(TMD) was installed to control the displacement response to earthquakes by generalizing to six analysis models according to the shape of the upper structure based on the case of various large spatial structures around the world. The six analysis models are ribbed type, latticed type, elliptical type, gable type, barrel type, and stadium type composed of 3D arch trusses. In this paper, ribbed type, latticed type and elliptical type were analyzed. The mass of each TMD was set to 1% of the total structural mass. Result of analyzing the optimal number and position of the analysis model, the displacement response control was the most excellent in the model with 6 and 8 TMDs, and the displacement response decreased in most cases. The displacement response control was better with installing the TMD at the edge point than focusing the TMD at the center of the analysis model. However, when 10 or more TMDs are installed or concentrated in the center, large loads intensively act on the structure, resulting in increased displacement. Therefore, although it is slightly different depending on the shape, it is judged that the displacement response control is the best to install 6 and 8 TMDs at the close to the edge point.

• Journal of Korean Association for Spatial Structures
• /
• v.20 no.4
• /
• pp.73-81
• /
• 2020

In this study, a tuned mass damper(TMD) was installed to control the displacement response to earthquakes by generalizing to six analysis models according to the shape of the upper structure based on the case of various large spatial structures around the world. The six analysis models are ribbed type, latticed type, elliptical type, gable type, barrel type, and stadium type composed of 3D arch trusses. In this paper, ribbed type, latticed type and elliptical type were analyzed. The mass of each TMD was set to 1% of the total structural mass. Result of analyzing the optimal number and position of the analysis model, the displacement response control was the most excellent in the model with 6 and 8 TMDs, and the displacement response decreased in most cases. The displacement response control was better with installing the TMD at the edge point than focusing the TMD at the center of the analysis model. However, when 10 or more TMDs are installed or concentrated in the center, large loads intensively act on the structure, resulting in increased displacement. Therefore, although it is slightly different depending on the shape, it is judged that the displacement response control is the best to install 6 and 8 TMDs at the close to the edge point.

• Journal of Forest and Environmental Science
• /
• v.29 no.4
• /
• pp.300-306
• /
• 2013

Based on the guiding ideology of "Close-to-nature forestry", the soil chemical properties of Korean pine (Pinus koraiensis) plantation forest which was early done by canopy gap control were analyzed of Liangshui nature reserve in northeastern China. The results indicated that the nurture of forestry crevice diaphanous tended to improve the soil nutrient contents and significant differences of soil nutrients existed among different levels of soil for the same forest type of Korean pine. At 0< $H{\leq}20$ cm layer, the content of available nitrogen, available phosphorus, available potassium, total nitrogen and total phosphorus in artificial pure Korean pine forest are 640.28 $mg{\cdot}kg^{-1}$, 7.54 $mg{\cdot}kg^{-1}$, 275.91 $mg{\cdot}kg^{-1}$, 1.114% and 0.075%, they all higher than the other kinds of forests and for average 1.1 times, 1.4 times, 1.3 times, 1.6 times and 1.2 times. From the layer of $0<H{\leq}20$ cm to 20 cm < $H{\leq}40$ cm, soil nutrient indicators showed various degrees of decreasing in which organic matter had the greatest decline, decreasing by 170.64% while PH had the lowest decline, decreasing by 4.66%.

• Journal of The Korean Astronomical Society
• /
• v.37 no.4
• /
• pp.285-288
• /
• 2004

Near-infrared imaging photometry supplemented by optical spectroscopy and narrow-band imaging of the H II region Sh 2-128 and its environment are presented. This region contains a developed H II region and the neighboring compact H II region S 128N associated with a pair of water maser sources. Midway between these, the core of a CO cloud is located. The principal ionizing source of Sh 2-128 is an 07 star close to its center. A new spectroscopic distance of 9.4 kpc is derived, very similar to the kinematic distance to the nebula. This implies a galactocentric distance of 13.5 kpc and z = 550 pc. The region is optically thin with abundances close to those predicted by galactocentric gradients. The $JHK_s$ images show that S 128N contains several infrared point sources and nebular emission knots with large near-infrared excesses. One of the three red Ks knots coincides with the compact H II region. A few of the infrared-excess objects are close to known mid- and far-infrared emission peaks. Star counts in J and $K_s$ show the presence of a small cluster of B-type stars, mainly associated with S 128N. The $JHK_s$ photometric properties together with the characteristics of the other objects in the vicinity suggest that Sh 2-128 and S 128N constitute a single complex formed from the same molecular cloud, with ages ${\~}10^6$ and < $3 {\times} 10^5$ years respectively. No molecular hydrogen emission was detected at 2.12 ${\mu}m$. The origin of this remote star forming region is an open problem.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.25 no.5
• /
• pp.422-431
• /
• 2022

Purpose: At the beginning of the Coronavirus disease (COVID-19) epidemic, physicians paid close attention to children with chronic diseases to prevent transmission or a severe course of infection. We aimed to measure the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) antibody levels in children with chronic gastrointestinal and liver diseases to analyze the risk factors for infection and its interaction with their primary disease. Methods: This cross-sectional study analyzed SARS-CoV-2 antibody levels in patients with gastrointestinal and liver diseases (n=141) and in healthy children (n=48) between January and February 2021. Results: During the pandemic, 10 patients (7%) and 1 child (2%) had confirmed COVID-19 infection (p=0.2). The SARS-CoV-2 antibody test was positive in 36 patients (25.5%) and 11 children (22.9%) (p=0.7). SARS-CoV-2 antibody positivity was found in 20.4%, 26.6%, 33.3%, and 33.3% of patients with chronic liver diseases, chronic gastrointestinal tract diseases, cystic fibrosis, and liver transplantation recipients, respectively (p>0.05, patients vs. healthy children). Risk factors for SARS-CoV-2 antibody positivity were COVID-19-related symptoms (47.2% vs. 14.2%, p=0.00004) and close contact with SARS-CoV-2 polymerase chain reaction-positive patients (69.4% vs. 9%, p<0.00001). The use, number, and type of immunosuppressants and primary diagnosis were not associated with SARS-CoV-2 antibody positivity. The frequency of disease activation/flare was not significant in patients with (8.3%) or without (14.2%) antibody positivity (p=0.35). Conclusion: SARS-CoV-2 antibodies in children with chronic gastrointestinal and liver diseases are similar to that in healthy children. Close follow-up is important to understand the long-term effects of past COVID-19 infection in these children.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2833-2838
• /
• 2007

Recently, small hydropower attracts attention because of its clean, renewable and abundant energy resources to develop. However, suitable turbine type is not determined yet in the range of small hydropower and it is necessary to study for the effective turbine type. Moreover, relatively high manufacturing cost by the complex structure of the turbine is the highest barrier for developing the small hydropower turbine. Therefore, a cross-flow turbine is adopted because of its simple structure and high possibility of applying to small hydropower. The purpose of this study is to examine the optimum configuration of nozzle shape to further optimize the cross-flow hydraulic turbine structure and to improve the performance. The results show that pressure on the runner blade in Stage 1 and velocity at nozzle outlet have close relation to the turbine performance.

• Korean Journal of Cognitive Science
• /
• v.3 no.2
• /
• pp.249-270
• /
• 1992

The purpose of this paper is to classify the types of input characters,printed Hangul characters,using Maximum Run Length Projection(MRLP)that is used to extract features of input character.Because the number of Hangul characters is large and its structure is complex,there exists close similarities among characters.This paper,therefore,tried to increment the type classification rate using fuzzy resoning.The Maximum Run Length Projection is very immune to noise,and also useful to extracting the demanding information efficiently.In a test case with the most frequently use 917 printed Hangul characters,it achieved 98.58%correct classification rate.