• Journal of Preventive Medicine and Public Health
• /
• v.51 no.4
• /
• pp.213-214
• /
• 2018

Lyme borreliosis (LB) is the most common tick-borne infectious disease in North America, and it was designated as a national notifiable infectious disease in Korea in December 2010. While no cases in Jeju-do were recorded from 2012 to 2016, a recent survey reported that the seroprevalence of Borrelia burgdorferi using enzyme-linked immunosorbent assays in horses in Jeju-do was 19.0% (95% confidence interval, 12.0 to 28.3%). This fact suggests that horses may be a potential reservoir of LB in Jeju-do and that individuals in close contact with horses may be a high-risk group. Thus, a serological study in this high-risk group is urgently needed.

• Journal of Astronomy and Space Sciences
• /
• v.12 no.2
• /
• pp.196-203
• /
• 1995

The UBV light curves of a close eclipsing binary SW Lyn were obtained with the observations made at the Sobaeksan Astronomy Observatory during 7 nights from September 1983 to March 1987. These light curves show asymmetry to the secondary minimum light and the asymmetry is larger at the shorter wavelength light curve. Assuming that the star sport makes the asymmetry, we employed the WD code to make the B and V light curves solution. We confirmed that SW Lyu has near contact(semi-detached) Roche configuration and has the Case A evolution.

• Journal of the Korean Society of Safety
• /
• v.27 no.5
• /
• pp.49-54
• /
• 2012

There is a possibility that electrical sparks may occur at discontinuities in metallic structures from distance of close to high power radio/radar transmitters. Voltage may be induced on these metallic structures by the radio-frequency transmitter. In this case, a person who comes into contact with these structure may be undergone a severe electrical shock. In this paper, assessment of the electrical shock and ignition hazards was investigated through experimental which are consisted radio transmitter and metallic loop-type structure in shield room. We measured that the induced voltage was highest at 61 MHz of transmission frequency, and confirmed the possibility of electric shock and explosion induced by a voltage or spark. But it is needed additional research where is opened site.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.1109-1112
• /
• 2003

본 연구는 switching mode 의 Power NMOSFET failure mode 에 관하여 분석하고 원인을 규명하였다. 분석된 power NMOSFET은 30V급이며, vender A의 상용화 제품이다. 발생한 failure mode는 power switch 회로에서 특정 ID 를 detect 하지 못하는 mode 였다. 측정결과 source voltage 가 저하되었으며, power NMOSFET DC 동작특성 분석 결과 Vgs 변화에 따라 Id 가 저하되었다. Fail 된 power MOSFET 특성값 reference는 동일 LOT의 양품을 선정하였다. De-cap후 Inversion 과 Accumulation mode 별로 Photoemission spectrum analyzer(PSA) 분석 방법을 적용하였다. 결과 accumulation mode 에서 intensity가 감소하였으며, forward diode mode에서 국소적으로 변화하는 영역이 검출되었다. SEM 분석결과 gate metal 과 source metal 의 micro-contact 이 이루어져 있었다. 이 경우 gate metal 과 source metal 사이 close loop 를 형성하여 gate charge량을 변화시켜 power NMOSFET의 출력을 저하하는 failure mode가 발생됨을 분석할 수 있었다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1997.10a
• /
• pp.100-109
• /
• 1997

Tappet is the part which consists of valve train system in Over Head Valve type diesel engine. The role of tappet is to open and close the intake/exhaust valve by rotating with cam. There are wear problems like scuffing or pitting in cam/tappet system because of the higher Hertzian contact stress and sliding wear characteristics between cam and tappet. In this paper, to find optimal materials combination in cam/tappet system, wear test and rig test were performed. $Si_3N_4$, chilled cast iron, sintered alloy were selected for tappet materials. As the result of test, it is found that $Si_3N_4$ tappet has the excellent wear properties.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1997.10a
• /
• pp.145-151
• /
• 1997

PAG(Polyalkylene Glycol) and esters are tested with HFC-134a as a refrigeration oil. This investigation enhances the testing method by taking the compressor's environment into account. A testing environment charged with refrigerant gas more closely simulates the conditions of a compressor. The friction coetTicient of the PAG/HFC-134a system is similar to that of the mineral oil/CFC-12 system at operating conditions. Ester oils are preferable at the start & stop condition in the lubricity aspect. PAG shows good lubricity in conditions of extreme contact pressure. Consequently, this test provides reliable results on compressor lubricity of refrigeration oils with HFC-134a. It suggests a methodological way for the proper selection of refrigeration oils that may improve the durability and performance of a compressor.

• Structural Engineering and Mechanics
• /
• v.60 no.5
• /
• pp.829-849
• /
• 2016

In this paper, experimental as well as numerical analysis of Glass Fiber Reinforced Polymer (GFRP) laminated composite has been presented under ballistic impact with varying projectile nose shapes (conical, ogival and spherical) and incidence velocities. The experimental impact tests on GFRP composite plate reinforced with woven glass fiber ($0^{\circ}/90^{\circ}$)s are performed by using pneumatic gun. A three dimensional finite element model is developed in AUTODYN hydro code to validate the experimental results and to study the ballistic perforation characteristic of the target with different parametric variations. The influence of projectile nose shapes, plate thickness and incidence velocity on the variation of residual velocity, ballistic limit, contact force-time histories, energy absorption, damage pattern and damage area in the composite target have been studied. The material characterization of GFRP composite is carried out as required for the progressive damage analysis of composite. The numerical results from the present FE model in terms of residual velocity, absorbed energy, damage pattern and damage area are having close agreement with the results from the experimental impact tests.

• Geomechanics and Engineering
• /
• v.16 no.2
• /
• pp.177-185
• /
• 2018

The subsidence mechanism of ground surface is a complex phenomenon when multiple seam coal mining operations are carried out. Particularly, the coal mining beneath karstic formations causes a very special form of subsidence. The subsidence causes elasto-plastic deformation of the karstic layers and the collapse of cavities leads to dolinization and/or sinkhole formation. In this study, a sinkhole with a depth of 90 m and a width of 25 m formed in Gelik district within the coal-basin of Zonguldak (NW, Turkey) induced by multiple seam coal mining operations in the past has been presented as a case-history together with two-dimensional numerical simulations and InSAR monitoring. The computational results proved that the sinkhole was formed as a result of severe yielding in the close vicinity of the faults in contact with karstic formation due to multiple seam longwall mining at different levels.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.10
• /
• pp.1114-1119
• /
• 2004

The photodepositioned tungsten film by laser CVD has been carried out the taping test with scotch tape over 10 times. As a result, it exhibited strong adhesion to the under-film such as ITO and SiNx patterned on the LCD substrate. However, it was seriously attacked by alkaline solution used for removing polyimide. And a thickness of laser CVD tungsten film had a close relation to a speed of laser scanning. Also we have improved the success rate of a laser CVD repair with making two pairs of contact hole structure and decreasing laser scanning speed.

• Animal Systematics, Evolution and Diversity
• /
• v.30 no.3
• /
• pp.191-195
• /
• 2014

Four homalotine species-Anomognathus armatus (Sharp), Heterota onorum Maruyama, Neosilusa ceylonica (Kraatz), and Silusa lanuginosa Sharp-and three genera-Anomognathus Solier, Neosilusa Cameron, Silusa Erichson-are identified for the first time in Korea. The tribe Homalotini can be distinguished from other related tribes by the combination of the following characters: tarsal formula 4-4-5; mandible with patch or rows of denticles in ventral molar region; base of medial setae of prementum very close together, setal insertions in contact in many, setae displaced one behind the other in some; medial pseudopore field of prementum very narrow in many. Habitus photographs, diagnoses, and illustrations of male genitalia of these four species are provided.