1 |
Tiberkak, R., Bachene, M., Rechak, S. and Necib, B. (2008), "Damage prediction in composite plates subjected to low velocity impact", Compos. Struct., 83, 73-82.
DOI
|
2 |
Wen, H.M. (2000), "Predicting the penetration and perforation of FRP laminates struck normally by projectiles with different nose shapes", Compos. Struct., 49, 321-329.
DOI
|
3 |
Wen, H.M. (2001), "Penetration and perforation of thick FRP laminates", Compos. Sci. Tech., 61, 1163-1172.
DOI
|
4 |
Zhang, D., Sun, Y., Chen, L. and Pan, N. (2013), "A comparative study on low-velocity impact response of fabric composite laminates", Mater. Des., 50, 750-756.
DOI
|
5 |
ANSYS/AUTODYN 14.5 (2012), User's manual, ANSYS Inc. South Pointe.
|
6 |
Bilingardi. G. and Vadori, R. (2003), "Influence of the laminate thickness in low velocity impact behavior of composite material plate", Compos. Struct., 61, 27-38.
DOI
|
7 |
Cantwell, W.J. and Morton, J. (1989), "A comparison of the low and high velocity impact response of CFRP", Compos., 20(6), 545-551.
DOI
|
8 |
Evci, C. and Gulgec, M. (2012), "An experimental investigation on the impact response of composite materials", Int. J. Impact. Eng., 43, 40-51.
DOI
|
9 |
Hayhurst, C.J., Livingstone, I.H.G., Clegg, R.A. et al. (2001), "Ballistic limit evaluation of advanced shielding using numerical simulations", Int. J. Impact Eng., 26, 309-320.
DOI
|
10 |
Hossainzadeh, R., Shokrieh, M.M. and Lessard, L. (2006), "Damage behavior of fiber reinforced composite plates subjected to drop weight impacts", Compos. Sci. Tech., 66(1), 61-68.
DOI
|
11 |
Johnson, G.R. and Cook, W.H. (1985), "Fracture characteristics of three metals subjected to various strains, strains rates, temperature and pressure", Eng. Frac. Mech., 21, 31-48.
DOI
|
12 |
Nasimuddin, P.E. and Vaidya, U. (2005), "Ballistic testing of polymer composites to manufacture emergency safe house shelters", J. Compos. Constr., 9(4), 369-375.
DOI
|
13 |
Jordan, J.B. and Naito, C.J. (2014), "An experimental investigation of the effect of nose shape on fragments penetrating GFRP", Int. J. Impact Eng., 63, 63-71.
DOI
|
14 |
Kumar, S., Gupta, D.S., Singh, I. and Sharma, A. (2010), "Behavior of Kevlar/Epoxy Composite Plates under Ballistic Impact", J. Rein. Plast. Compos., 29, 2048-2064.
DOI
|
15 |
Landa, B.P. and Olivers, F.H. (1995). "An analytical model to predict impact behavior of soft armor", Int. J. Impact Eng., 16, 455-466.
DOI
|
16 |
Sabet, A., Fagih, N. and Beheshty, M.H. (2011), "Effect of reinforcement type on high velocity impact response of GRP plates using a sharp tip projectile", Int. J. Impact Eng., 38, 715-722.
DOI
|
17 |
Silva, M.A.G., Cismaciu, C. and Chiorean, C.G. (2005), "Numerical simulation of ballistic impact on composite laminates", Int. J. Impact Eng., 31, 289-306.
DOI
|
18 |
Ansari, M.M. and Chakrabarti, A. (2016), "Impact behaviour of FRP composite plate under low to hyper velocity impact", Compos. Part B, 95, 462-474.
DOI
|
19 |
Talib, A.R.A., Abbud, L.H., Ali, A. and Mustapha, F. (2012), "Ballistic impact performance of Kevlar-29 and powder/epoxy targets under high velocity impact", Mater. Des., 35, 12-29.
DOI
|
20 |
Tham, C.Y., Tan, V.B.C. and Lee, H.P. (2008), "Ballistic impact of a Kevlar helmet: experimental and simulations", Int. J. Impact Eng., 35, 304-318.
DOI
|
21 |
Ansari, M.M. and Chakrabarti, A. (2016), "Progressive damage of GFRP composite plate under ballistic impact: experimental and numerical study", Polymer Polymer Compos., 24(7), 579-586.
|