• The Journal of Information Technology
• /
• v.10 no.3
• /
• pp.33-45
• /
• 2007

Systolic Array Processor is used for designing the special purpose processor in Digital Signal Processing, Computer Graphics, Neural Network Applications etc., since it has the characteristic of parallelism, pipeline processing and architecture of regularity. But, in case of using general design method, it has intial waiting period as large as No. of PE-1. And if the connected system needs parallel and simultaneous outputs, processor has some problems of the performance, since it generates only one output at each clock in output state. So in this paper, one dimensional Systolic Array Processor that is designed according to the dependance of data and operations using the partitioned sub-matrix is proposed for the purpose of improving the performance. 1-D Systolic Array using 4 partitioned sub-matrix has efficient method in case of considering those two problems.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1301-1304
• /
• 2008

In this study, we used a multiple phase scheme for the clock in the dual-pull-down driver for TFT display panels. In this scheme, the turn-on time for the transistors in the dual-pull-down structure was reduced from 1/2 to 1/4 or 1/8 of the period cycle time. While keeping proper operation of the transistor size of circuit was fine tuned to achieve an optimal performance. The relation between the active time and the transistor dimensions was obtained for the optimal design.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.650-654
• /
• 1999

In this paper, author describe the simulation results concerning the period doubling bifurcation route to chaos of DC/DC boost converter under current mode control to show that it is common phenomena on switching regulator when parameters are improperly chosen or continuously varied beyond the ensured region by system designer. Bifurcation diagrams of periodic orbits of inductor current and capacitor voltage of DC/DC boost converter are plotted with sampled data at moment of each clock pulse causing switching on. DC/DC boost converter studied on this paper is modelled by its state space equations as per switching condition under continuous conduction mode. Current reference signal and capacitance are chosen as the bifurcation parameters and those are varied in step for iterative calculation to find bifurcation points of periodic orbits of state variables.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.5
• /
• pp.455-462
• /
• 2015

H-field EMI measurements have been performed for the single-ended, the differential, and the pseudo-differential signaling on a 11" FR4 microstrip line. The pseudo-differential signaling reduces EMI by more than 10 dB compared to the single-ended signaling if the delay mismatch is lower than 5% of a period for a 3 GHz clock signal. Empirical H-field equations for both differential and single-ended signaling showed fair agreements with measurements.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.697-700
• /
• 1988

This paper describes the design of a hardware system for ECG feature extraction based on pipeline processor consisting of three computers. ECG data is acquisited by 12 bit A/D converter with hardware QRS triggred detector. Four diagnostic parameters-heart, axis, and ST axis, and ST segment are used for the classification and the diagnosis of arrhythmia. The functions of the main CPU were distributed and processed with three microcomputers. Therefore the effective data process and the real time process using microcomputer can be obtained. The interconnection structure consisting of two common memory units is designed to decrease the delay time caused by data transfer between processors and designed by which the delay time can be taken 1% of one clock period.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.285-288
• /
• 2002

In this paper, a new structure of 1024-bit high-speed RSA cryptosystem has been proposed and implemented in hardware to increase the operation speed and enhance the variable-length operation in the plain text. The proposed algorithm applied a radix-4 Booth algorithm and CSA(Carry Save Adder) to the Montgomery algorithm for modular multiplication As the results from implementation, the clock period was approached to one delay of a full adder and the operation speed was 150MHz. The total amount of hardware was about 195k gates. The cryptosystem operates as the effective length of the inputted modulus number, which makes variable length encryption rather than the fixed-length one. Therefore, a high-speed variable-length RSA cryptosystem could be implemented.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.8
• /
• pp.1217-1226
• /
• 1989

This paper describes a design of hardware system for real time automatic diagnosis of ECG arrhythmia based on pipeline processor consisting of three microcomputer. ECG data is acquisited by 12 bit A/D converter with hardware QRS triggered detector. Four diagnostic parameters-heart rate, morpholigy, axis, and ST segment-are used for the classification and the diagnosis of arrhythmia. The functions of the main CPU were distributed and processed with three microcomputers. Therefore the effective data process and the real time process using microcomputer can be obtained. The interconnection structure consisting of two common memory unit is designed to decrease the delay time caused by data transfer between processors and be which the delay time can be taken 1% of one clock period.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.974-977
• /
• 1999

In this paper, we have proposed the hardware architecture which implements the algorithm for retaining the connectivity which prevents disconnecting in the gray-scale image thinning To perform the image thinning in a real time which find a skeleton in image, it is necessary to examine the connectivity of the skeleton in a real time. The proposed architecture finds the connectivity number in the 4-clock period. The architecture is consists of three blocks, PS(Parallel to Serial) Converter and State Generator and Ridge Checker. The PS Converter changes the 3$\times$3 gray level image to four sets of image pixels. The State Generator examine the connectivity of the central pixel by searching the data from the PS Converter. the 3$\times$3 gray level image determines. The Ridge Checker determines whether the central pixel is on the skeleton or not The proposed architecture finds the connectivity of the central pixel in a 3$\times$3 gray level image in the 4-clocks. The total circuits are verified by the design tools and operate correctly.

• Journal of Biomedical Engineering Research
• /
• v.9 no.1
• /
• pp.79-86
• /
• 1988

This paper describes the design of a hardware systenl for ECG feature extraction based on pipeline processor consistinsf of three microcomputers. ECG data is acquisited by 12 bit A/D converter with hardware QRS triggered detector. Four diagnostic parameters parameters-heart rate, morPhology, axis, and 57 segment-are used for the classification and the diagnosis of arrhythmia. The functions of the main CPU were distributed and processed with three microcomputers. Therefore the effective data process and the real time process using microcomputer can be obtained. The interconnection structure consisting of two common memory units is designed to decrease the delay time caused by data transfer between processors and designed by which the delay time can be taken Loye of one clock period.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.731-733
• /
• 1988

This paper describes a design of hardware system for real time automatic diagnosis of ECG arrhythmia based on pipeline processor consisting of the three microcomputer. ECG data is acquisited by 12 bit A/D converter with hardware QRS triggered detector. Four diagnostic parameters - heart rate, morphology, axis, and ST segment - are used for the classification and the diagnosis of arrhythmia. The functions of the main CPU were distributed and processed with three microcomputers. There-fore the effective data process and the real time process using microcomputer can be obtained. The interconnection structure consisting of two common memory units is designed to decrease the delay time caused by data transfer between processors and by which the delay time can be taken 1 % of one clock period.