• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.15-19
• /
• 2003

In this paper, the bit error rate (BER) performance of the fast frequency hopping/M-ary frequency shift keying system using the clipper receiver is analyzed by using the characteristic function (CF) technique in the presence of n=1 band multitone jamming and additive white Gaussian noise environment. The CFs of the clipper receiver outputs are derived as a infinite series representation using Gamma function and Marcum's Q -function. The analytical results are validated with various simulation results. Performance comparisons with linear combining receiver are shown that the BER performance of the clipper receiver is much better than that of the linear combining receiver In addition, as the clipping level approaches to infinity, it is shown that the clipper receiver simply performs a linear combining without clipping and there exists an optimum value of diversity level (the number of hops per symbol) that maximizes the worst case BER performance of the clipper receiver.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.2
• /
• pp.152-161
• /
• 2009

As follow jamming signals in a FHSS system cause malfuctioning in the code tracking circuits using early-late gates, we need a code tracking circuit that is robust against the follow jamming signals. In this paper, we propose a code tracking circuit using a linear clipper-Gaussian filter algorithm to remedy the malfunctioning due to the follow jamming signals in FHSS systems. We investigate the mechanism of the malfunctioning of the code tracking circuit and verify that the proposed linear clipper-Gaussian filter metigates the problem through mathematical analysis and computer simulations.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.12 no.2
• /
• pp.141-146
• /
• 1994

At the present time the cadastral sections has a document for constructing database of land register and commit to record the assessed cost of land in field. Kumjung-Ku, Pusan is a model in this study. It is possible to investigate the present land record by connecting graphic data with attribute data in author's program. AutoCAD make possible to connect graphic data with attribute data. Because of limitation of constructing database in AutoCAD, authors construct independent database in Clipper's circumstance. Database in AutoCAD and Clipper is connected to the menu-file in AutoCAD's circumstance.

• Applied Microscopy
• /
• v.38 no.4
• /
• pp.347-351
• /
• 2008

The morphological characteristics of the cut sections of hair using razor, clipper and scissors were investigated with scanning electron microscopy. With the razor, the cutting section had a long elliptical form and a rhythmical ribbon shape. It was curved outward since the end part of it became thinner. With the scissors, the cutting section had a flat, circular form. It seemed to be because the scissors imposed a constant strength on the hair. With the clipper, the cutting section had also a circular form but a layer of the macrofibril was generated in the middle part of the cortex. It seemed to be generated while the rapidly moving blades of the clipper cut the hair in an instant.

• 대한방사선치료학회:학술대회논문집
• /
• 1995.06a
• /
• pp.6-6
• /
• 1995

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.12
• /
• pp.31-38
• /
• 2003

In this paper, we proposed a new structural AGC(Automatic Gain Control) circuit with extremely short settling time using high speed operation characteristics of a clipper. We investigated its operation characteristics in analysis. We also designed a burst-mode preamplifier for 1.25Gbps EPON systems using commercial foundry and investigated its characteristics by comparing the results of the designed and those of the analyzed. The characteristics of the designed circuit are in good agreement with those of the analyzed. As a result, it is shown that it is possible to realize extremely short settling time of under 1㎱.

• Journal of Environmental Science International
• /
• v.31 no.4
• /
• pp.365-368
• /
• 2022

The purpose of this study was to investigate the effects of desensitization and flooding on the behavior of dogs during grooming, focusing on their response to the sound and skin stimulation while using a clipper. A total of 20 adult dogs over two years of age with complete personality formation were included in the study. Ten dogs, of which three were Bichons (average weight 5 kg), four were Poodles (average weight 5 kg), and three were Malteses (average weight 4 kg), were subjected to the desensitization process. The remaining 10 adult dogs were subjected to the flooding experiment, and were of the same breed and average weight as the adult dogs used in the desensitization process. The desensitization and the flooding were performed three times a day (approximately 1 min per session) for 10 days. For desensitization, statistical significance was observed only on the fifth day, when compared by breed (p<0.05). Overall, when compared by measurement day, the results of desensitization for Bichon, Poodle and Maltese dogs were statistically significant (p<0.05). The results for the Bichon, Poodle, and Maltese dogs that were subjected to flooding were found to be statistically significant (p<0.05). There was a significant difference in the results of the flooding on the second and ninth days (p<0.05); however, flooding had no effect on the other days (p>0.05). Desensitization using the clipper, a beauty tool, was faster than flooding in achieving stabilization. In conclusion, desensitization and flooding showed positive results on the stress relief and emotions of dogs during grooming, with respect to cosmetic fear response.

• The Journal of Korean Society for Radiation Therapy
• /
• v.7 no.1
• /
• pp.71-85
• /
• 1995

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.859-866
• /
• 1993

With the object of doing mechanical grafting of cucurbitaceous vegetables, the grafting robot was developed in 1989. This robot consists of the following components : feeding wheels, grippers, conveying wheels, cutters , fixing clipper, discharger , controller and power supply. One cycle time to produce a grafted plant is about 3 seconds, Results of some cucumber grafting tests : successful grafting rate of 98 percent and after acclimation, a successful agglutination rate of 95 percent. These techniques are now transferring to the private company. The commercial robot will come into the market in this year.

• The KIPS Transactions:PartA
• /
• v.11A no.2
• /
• pp.165-174
• /
• 2004

Because a quantity wireless internet contents is much less than wired internet contents, it exist high necessities that wired internet contents should be converted into wireless internet contents. The conversion server implemented in this paper, automatically recognizes the type of user agents when they request, retrieves source documents on the web site specified by an URL, generates metaXML documents as an intermediate form, and converts them wireless markup documents appropriate for user agents. The conversion server interoperates with the image converter for image conversion and the clipper which is an authoring tool for clipping existing wired internet documents. We performed experiments about capability of the conversion server transcoding static/dynamic web pages specified by an URL. According to performance results on dynamic web pages, the conversion server showed better throughput when a thread pool in the terror maintains 5 threads compared with 1 and 10 threads.