• Journal of Environmental Impact Assessment
• /
• v.32 no.5
• /
• pp.269-278
• /
• 2023

The pollution status of heavy metals in the soils of children's playground was investigated for a sustainable soil environment in urban parks of Seoul. As sampling sites, 281 locations were selected from a 7 districts in the Seoul city. The overall mean concentrations of the heavy metals (Cd 0.21 mg/kg, Cu 5.97 mg/kg, As 2.40 mg/kg, Pb 7.55 mg/kg, Zn 34.08 mg/kg, Ni 4.22 mg/kg, Hg 0.02 mg/kg and Cr6+ not detected.) in the soils of the palygrounds were lower than the worrisome level in criteria for area 1 in Korea soil environment conservation act. In addition, when the soil pollution grade (SPC) was evaluated as an average value, it was found to be less than 100, the first grade, at all points in the seven autonomous districts, indicating thatthe soil was in good soil condition. However, when evaluated as the maximum value, some of the five districts showed values of 100 or more. Therefore, it was found that continuous management and interest of the local government, which is the management body of children's playgrounds, is necessary for a safe soil environment.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.6
• /
• pp.539-547
• /
• 2019

Recently, the international community signed a climate change agreement to prevent global warming. Yet currently, the fossil fuels have been widely used in to supply building energy for cooling and heating. The Green Building certification (G-SEED), an energy efficiency rating for new or existing buildings requires that buildings meet certain conditions. Insulation is used as a building material to reduce the energy supply to buildings and to improve the thermal insulation, and it accounts for more than 90% of the total heat resistance provided by the building surface components that meet the energy-saving design standards of new buildings. In this investigation, a performance evaluation study was conducted through an experimental study by directly extracting the foam polystyrene insulation on-site during the remodeling of a building that was in the range of 22~38 years old. Through tests, it was found that the thermal conductivity of the extrusion method insulation (XPS) was reduced by 48% and the compressive strength of XPS decreased by 36% compared to KS M 3808, which is the initial quality standard. For bead method insulation (EPS) with a thickness of 50mm, the thermal conductivity, the compressive strength, and flexural failure load were similar to the initial quality standard. Therefore, in the calculation of the primary energy requirement per unit area per year, the performance of bead method insulation can be estimated simply by considering the thickness of the insulation, while a correction factor that considers its performance deterioration should be applied when extrusion method insulation is used.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.294-304
• /
• 2019

Abstract Greenhouse Gas (GHG) emissions from agriculture and forestry sources in the energy sector have been estimated based on a top-down approach, which is an efficient way to estimate GHG emissions with the limited number of emission factors and activity data. On the other hand, for GHG abatement policies, more detailed information and data on GHG emissions are required. This study discusses how to improve the estimates of GHG emissions from the agricultural and forestry sources in the energy sector. To this end, this paper reviews the current estimation method of GHG emissions and presents three suggestions to enhance the current method. First, the development of country specific emission factors and corresponding activity data is proposed based on the 2006 IPCC Guidelines, National Greenhouse Gas Inventory Reports from other countries, and Domestic Statistics. Second, the uncertainty in CO₂ emissions from agriculture in energy sector based on 2006 IPCC Guidelines is estimated, and ways of reducing the uncertainty in CO₂ emissions are suggested. Finally, a potential way to reflect the GHG emissions from the use of renewable energy is suggested.

• Journal of Digital Convergence
• /
• v.15 no.5
• /
• pp.129-138
• /
• 2017

Faced with the era of the IoT (Internet of Things) and smart homes, this study aims to explore the type of information loaded on smart devices that can lead to consumer's efficient energy use. 105 Americans participated in the survey with eight different versions according to two energy consumption levels (Above or Below condition) by four information frames (Finance, security, environment, or health). It was found that frames can make significant differences in consumers' attitudes; (1) Those in the Below condition worried about environments more than those in the Above condition; (2) Finance-framed information in the Above condition was the least effective to increase consumers' energy saving motivation; (3) In the Below condition, those receiving finance and security framed information revealed more environmental concerns than those receiving other types of informations. This study can contribute to the field by providing with basic research findings that smart device developers can refer to in the future. Also, follow-up studies need to be conducted to examine effective messages for Korean energy consumers.

• Journal of Energy Engineering
• /
• v.24 no.2
• /
• pp.129-143
• /
• 2015

Increasing concerns on climate change and energy security accelerated policies to reduce green-house gas emission, especially from the transportation sector. Electric vehicle (EV) has been on the spotlight to deal with such environmental issue and V2G (Vehicle-to-Grid) technology began to draw attentions as an alternative to reduce ownership costs while contributing to an efficient and decentralized power grid. This study conducts a scenario analysis on total cost of ownership of EV under V2G scheme and compare with non-V2G EV and Internal Combustion Engine (ICE) vehicle. As result, V2G service is expected to provide an annual average profit of $210 to EV users willing to reverse flow its residual power in the battery. The profit from V2G service leaves a margin of $4,530 over operational lifetime, compared with $2,420 cost of charge for non-V2G EV. In summary, total cost of ownership of V2G-capable EV was 6.2% less than non-V2G EV and 10.2% higher than ICE vehicle. The results confirm a comparative economic advantage of operating EV under V2G scheme. Increased number of EVs with V2G service has shown to provide positive effects to power industry for valley filling in load distribution, thus, favorably increasing the overall economic feasibility.

• Journal of Energy Engineering
• /
• v.26 no.3
• /
• pp.51-63
• /
• 2017

Paris Agreement on Climate Change(2015) requires to reduce the greenhouse gas emission. One of the responses to the requirement is to change the proportion of power generation, which is summarized to the decrease in thermal power and the increase in new and renewable power. This article conducts a comparative analysis on the economic effects between thermal- and new and renewable- power generations, using the Input-Output Table from The Bank of Korea. The results of this analysis show that the new and renewable power generation has got the larger effects in production-inducing, value-added-inducing, employment-inducing, and supply-shortage scopes, while the smaller effect in price-pervasive scope than the thermal power generation. According to these results, the complex consideration should be taken into when the changes in power generation mix are tried. Especially, the political efforts to reduce the supply-shortage effect of new and renewable power and the price-pervasive effect of thermal power will be important.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.5 no.2
• /
• pp.51-60
• /
• 2003

Rice, which occupies about 60% of the farmland in Korea, is a staple crop in Asia. It not only absorbs $CO_2$ from the atmosphere, but also emits carbon in a form of CH$_4$. It has a potential role in the global budget of greenhouse gases because of its relative contributions of carbon absorption and emission associated with changing hydrologic cycle. To better understand its current and future role, seasonal variations of energy and $CO_2$ exchange in this critical ecosystem need to be quantified. The purpose of this study was to measure, document and understand the exchange of energy and $CO_2$ in a typical rice paddy in Korea throughout the whole growing season. Since late April of 2002, we have conducted measurements of energy and $CO_2$ exchange in a rural rice paddy at Hari site, one of the Korea regional network of tower flux measurement (KoFlux). After the quality control and gap-filling, the observed fluxes were analyzed in the context of micrometeorology and biophysics. $CO_2$ and energy exchanges varied significantly with land cover changes (e.g., plant growth stages), in addition to changes in weather and climate conditions. This study, reporting first direct measurement of energy and $CO_2$ exchange over a rice paddy in Korea, would serve as a useful database as one of the reference sites in AsiaFlux and FLUXNET.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.9
• /
• pp.604-612
• /
• 2012

Self-management plan for GHG (Greenhouse Gas) reduction should be prepared in academic facilities, which occupy a large amount of energy consumption. In this study, a university was chosen as one of the major academic facilities and its energy consuming pattern and GHG emission were analyzed. The results have shown that annual $CO_2$ emission from university buildings was 10,452 ton-$CO_2$ (0.65 ton-$CO_2/m^2$), and dependent upon 78.0% electricity, 20.5% LNG and 1.5% oil, respectively as energy sources. According to more detail analysis by usage of energy consumption, appliances occupies 36.7% followed by gas heating (18.9%), lighting (18.6%), heating with electricity (12.5%), cooling with electricity (10.2%), transportation (1.5%), gas cooling (1.2%) and cooking (0.4%). Furthermore, annual $CO_2$ emissions per unit area and a student by electricity usage were evaluated to 51.30 kg-$CO_2/m^2$ and 981.86 kg-$CO_2$/capita, respectively and those by LNG usage were 14.61 kg-$CO_2/m^2$ and 241.01 kg-$CO_2$/capita.

• Clean Technology
• /
• v.24 no.4
• /
• pp.339-347
• /
• 2018

In order to cope with environmental problems and climate change caused by fossil fuels, renewable energy supply is increasing year by year. Currently, waste energy accounts for 60% of renewable energy production. However, waste has a lower calorific value than fossil fuels and contains various harmful substances, which causes serious problems when applied to power generation boilers. In particular, the chlorine in the waste fuel increases slagging and fouling of boiler heat exchangers, leading to a reduction in thermal efficiency and the main cause of high temperature corrosion, lowering facility operation rate and increasing operating cost. In this study, the high temperature corrosion experiments of superheater materials (ASME SA213/ASTM A213 T2, T12 and T22 alloy steel) by alkali chlorides were conducted, and their corrosion characteristics were analyzed by the weight loss method and SEM-EDS. Experiments show that the higher the temperature and chloride content, the more corrosion occurs, and KCl further corrodes the materials compared to NaCl under the same condition. In addition, the higher the chromium content of the material, the better the corrosion resistance to the alkali chlorides.

• Geophysics and Geophysical Exploration
• /
• v.26 no.4
• /
• pp.229-237
• /
• 2023

The use of artificial sources such as explosives and mechanical vibrations for seismic exploration in urban areas poses challenges, as the vibrations and noise generated can lead to complaints. As an alternative to artificial sources, the surface waves generated by traffic noise can be used to investigate the subsurface properties of urban areas. However, traffic noise takes the form of plane waves moving continuously at a constant speed. To apply existing surface wave processing/inversion techniques to traffic noise, the recorded data need to be transformed into a virtual shot gather format using seismic interferometry. In this study, various seismic interferometry methods were applied to traffic noise data, and the optimal method was derived by comparing the results in the Radon and F-K domains. Additionally, the data acquired using various receiver arrays were processed using seismic interferometry, and the results were compared and analyzed to determine the most optimal receiver array direction for exploration.