• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.295-303
• /
• 2022

Residential heating systems in South Korea are largely based on the use of ondol pipelines. Heat is transferred to the floor by passing hot water through a metal or plastic pipe buried within the concrete of the floor. Consequently, it is difficult to clean the inside of these pipes after installation. Over time, foreign substances such as scale accumulate in the pipe when the ondol heating method is used for an extended period. Therefore, in the past, pipes were cleaned by removing foreign substances attached to the inside surfaces of the pipes using high-pressure water or by disassembling the pipes and removing foreign substances with chemical agents. Recently, a method for removing foreign substances through the cavitation effect of ultrasound has been proposed. This idea might lead to the development of new technologies for cleaning pipe interiors. Consequently, this study investigated the use of ultrasound to clean pipes embedded in concrete. In this study, devices that generated ultrasonic waves with various frequencies and directions were prepared. After preparing arbitrarily contaminated pipes, the appropriate frequency, output strength, and output direction for each foreign substance were determined through repeated experiments. The results of this experiment could provide important information for future methods of cleaning the interior of ondol piping systems.

• Nuclear Engineering and Technology
• /
• 제26권1호
• /
• pp.140-148
• /
• 1994

원전 증기발생기 2차측 제철 화학세정을 기존의 93$^{\circ}C$ 표준공정보다 고온인 1$25^{\circ}C$에서 검증시험을 수행하였다. 원전 증기발생기를 1$25^{\circ}C$에서 화학 세정한다는 가정아래 현장세정 조건을 결정하고 이를 다시 모사하여 3l 용량의 소형 검증시험 조건을 결정하였다. 1 gallon 용량의 316 스텐레스강 압력용기를 반응용기로 사용하는 화학세정 시험장치에서 검증시험을 수행하여 스러지 용해거동, 모재 부식률, 세정제 화학조성 변화거동 등을 측정하였다. 1$25^{\circ}C$ 검증시험 결과에서 93$^{\circ}C$ 표준공정보다 세정시간을 절반이하로 단축시키고도 더 효율적인 세정효과를 얻을 수 있을 뿐만이 아니라 2차측 모재의 부식률도 감소함을 확인할 수 있었다. 그러나 고온 세정공정은 아직 현장적용 경험이 없고, 별도의 외부순환 세정 장치를 이용하는 93$^{\circ}C$ 표준공정과는 달리 주냉각재의 잠열로 2차측을 가열하므로 세정이 완료될 때까지 주냉각 펌프를 계속 가동하여야 하는 단점이 있다. 가동중인 증기발생기에 대한 화학세정을 수행할 때 93$^{\circ}C$ 표준공정과 고온공정의 장 단점을 신중히 검토하여 최적공정을 적용하여야 할 것이다.

• 한국전자통신학회논문지
• /
• 제7권4호
• /
• pp.833-837
• /
• 2012

SC1(Standard Cleaning) 시간을 줄여 STI 측벽에서의 실리콘 손실 및 과도절개를 최소화하여 DRAM에서의 데이터 유지시간을 증가시키는 방법을 제안한다. SC1 시간 최적화를 통해 STI 상층 모서리부에서의 기생 전기장을 약화시킴으로서 Inverse Narrow Width 효과를 감소시키면 셀 트랜지스터의 Subthreshold 누설의 증가없이 채널 도핑농도가 감소하게 된다. 이것은 셀 접합에서 P-Well간 공핍 영역에서의 전기장을 최소화하여 일드나 데이터 유지시간의 증가를 보여 주었다.

• 한국재료학회지
• /
• 제18권6호
• /
• pp.307-312
• /
• 2008

In this study, a new cleaning process with a low cost of ownership (CoO) was developed with ozonated DI water ($DIO_3$). An ozone concentration of 40 ppm at room temperature was used to remove organic wax film and particles. Wax residues thicker than $200\;{\AA}$ remained after only a commercial dewaxer treatment. A $DIO_3$ treatment in place of a dewaxer showed a low removal rate on a thick wax layer of $8000\;{\AA}$ due to the diffusion-limited reaction of ozone. A dewaxer was combined with a $DIO_3$ rinse to reduce the wax removal time and remove wax residue completely. Replacing DI rinse with the $DIO_3$ rinse resulted in a surface with a contact angle of less than $5^{\circ}$, which indicates no further cleaning steps would be required. The particle removal efficiency (PRE) was further improved by combining a SC-1 cleaning step with the $DIO_3$ rinsing process. A reduction in the process time was obtained by introducing $DIO_3$ cleaning with a dewaxing process.

• 한국의류산업학회지
• /
• 제25권3호
• /
• pp.386-397
• /
• 2023

In this study, the efficacy of ultrasonic washing in cotton and wool fabrics was compared and evaluated against conventional washing in terms of cleaning properties and fabric deformation. Factors such as washing temperature, time, liquid ratio, and detergent concentration were kept varied, and the cleaning properties of sebum-soiled fabrics were assessed using different detergents such as alcohol ethoxylate, linear alkylbenzenesulfonate, and IEC 60456 Reference Detergent A^*. In addition, the effects and emulsification power of enzymes and oxygen bleach were examined. To compare the cleaning properties with general washing, a launder-O-meter was used. To investigate fabric deformation during the washing process, the loosening test cloth, shrinkage test cloth, and mechanical strength test cloth were compared between ultrasonic washing machines and household drum washing machines. The results indicate that ultrasonic washing exhibits superior cleaning properties than launder-O-meter when the temperature is low and the washing time is short. Furthermore, there is less deformation and damage during the washing process. It was also observed that the activity of the detergent increases when ultrasonic waves are applied to the washing process. Considering the increasing tendency to pursue convenience and simplicity in clothing management as well as the anticipated commercialization of smart clothing with built-in electric circuits, ultrasonic laundry could serve as a new alternative to existing laundry methods.

• 한국안광학회지
• /
• 제18권2호
• /
• pp.107-115
• /
• 2013

목적: 본 연구에서는 눈 화장품인 아이라이너에 노출시킨 소프트 콘택트렌즈의 파라미터가 어떻게 변하는가를 알아보고, 세척방법을 달리하여 세척하였을 때의 세척효과와 렌즈 파라미터의 회복정도를 비교하고자 하였다. 방법: 서로 다른 재질로 제조된 3종류의 소프트 콘택트렌즈에 각각 1시간, 4시간 및 6시간 동안 아이라이너를 침착시킨 후 안경용 초음파 세척 및 손 세척을 시행하였으며, 세척 전후 렌즈의 가시광선 투과도, 직경 및 표면의 변화를 비교하였다. 결과: 소프트 콘택트렌즈의 가시광선 투과도는 아이라이너의 침착시간이 길어질수록 감소하였다. 렌즈의 표면을 관찰한 결과 아이라이너의 침착 양상은 렌즈재질의 물성에 따라 다르게 나타나 narafilcon A 재질 렌즈에서 가장 침착이 큼을 알 수 있었다. 렌즈 직경은 hilafilcon B 및 etafilcon A 재질 렌즈는 감소하였으나, narafilcon A재질 렌즈는 증가하는 것으로 나타났다. 이러한 아이라이너의 침착은 안경용 초음파 세척기를 이용한 세척보다는 다목적 용액을 이용한 손 세척 시 세척효율이 우수한 것으로 나타났으나 렌즈의 직경이나 가시광선 투과도, 렌즈표면 등 렌즈 파라미터가 원래 상태로 회복되는 데에는 한계가 있었다. 결론: 이상의 결과로 소프트렌즈를 착용한 상태에서 눈 화장 하는 것을 최소화하는 것이 옳으며, 반복적으로 눈 화장을 할 때에는 렌즈 파라미터의 변화를 고려한 착용시간의 단축이나 빠른 렌즈의 교체주기가 필요하다고 사료된다.

• 한국산업보건학회지
• /
• 제9권1호
• /
• pp.87-98
• /
• 1999

The objectives of this study were to evaluate exposures to airborne methylene chloride and postshift carboxyhemoglobin (COHb) in blood of workers engaged in processes using blowing or cleaning agents, and to investigate correlation between methylene chloride concentrations and the blood COHb levels of workers. The geometric mean (GM) of workers' exposures (8 hour-time weighted averages, TWA) to airborne methylene chloride during cleaning molds using rags wetted with the solvent in the manufacture of flexible polyurethane foam (GM = 61.4 ppm), during operating the dip tank for cleaning molds in the manufacture of lens (GM = 61.0 ppm), and during cleaning the blowing nozzles by spraying the solvent in the manufacture of shoes (GM = 117.2 ppm) were exceeded the American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Value ($TLV^{(R)}$)-Time Weighted Average (TWA) (50 ppm). The COHb levels were significantly different among groups (p<0.05). The average COHh levels in blood of non-smoking workers were 2.0% in. low-level (<50 ppm) exposure group, and 3.9 % in high-level (>50ppm) exposure group. The average COHb levels in smoking workers were 3.1% in low-level exposure group, and 4.8% in high-level exposure group. The blood COHb levels of no-exposed workers to methylene chloride were 1.8% in non-smoking group, and 2.8% in smoking group. It was found that the COHb level dependeds on the methylene chloride concentration and smoking habit, and was highly correlated with methylene chloride concentration in air. The correlation coefficient was 0.81 among non-smoking workers. The estimated COHb level (3.6%) and 95% upper confidence limit (4.0%) corresponding to TLV-TWA of methylene chloride exceeded the current ACGIH Biological Exposure Index (COHb 3.5%) for carbon monoxide. The estimated COHb level (5.4%) at 100 ppm exceeded the standard (5%) recommended by National Institute for Occupational Safety and Health (NIOSH) for preventing adverse cardiovascular effect. The estimated COHb value and 95% upper confidence limit at 25 ppm of the Occupational Safety and Health. Adminstration (OSHA) Permissible Exposure Limit-TWA (PEL-TWA) were 2.6% and 3.0%, respectively. It is suggested that COHb in blood be kept below 3.0% to comply with OSHA PEL-TWA.

• 한국산학기술학회논문지
• /
• 제15권8호
• /
• pp.4736-4741
• /
• 2014

본 연구는 PCB기판 세척에 관한 것으로 기존 세척 방법인 침전식 세척의 단점인 PCB기판 표면실링제와 접착제 공정에서 형성된 이물질이 달라붙거나 끼워 있는 경우, 쉽게 제거되지 못하는 문제점이 있었다. PCB기판이 안착되어 고속회전을 통해 원심력으로 기판의 미세한 부분까지 이물질이 제거되도록 하는 PCB기판 세청용 회전 지그를 개발 하였다. 결과는 다음과 같다. 개발 목표는 PCB기판 세척시 불량률을 줄이는 것으로 기존 침전식에서, 원심력을 이용한 회전형으로 개발, 세척액에 따른 기판손상을 80%이상 줄이는 결과를 얻었다. 회전식에 따른 세척할 수 있는 수량이 제한된 단점을 베이스플레이트에서 PCB기판의 용이한 탈부착이 가능하도록 설계 기존 방법의 세척 후 공정을 포함한 시간과 비교하여 큰 차이를 보이지 않았으며. 기존 시간과 비교하여 세척시간을 90%까지 높였다. 세척용 회전 지그에 고정된 PCB기판이 원심력에 의해 이탈현상 없이 고정력을 효과적으로 유지 할 수 있도록 설계함으로써, 세척공정의 안정성 및 신뢰성을 확보하여 불량률을 1% 미만으로 개선 할 수 있었다.

• Journal of Preventive Medicine and Public Health
• /
• 제31권4호
• /
• pp.628-643
• /
• 1998

To investigate the exposure levels of organic solvents and subjective symptoms of dry-cleaning workers, 77 male and 52 female dry-cleaning workers who had been worked in a small city of Chungnam province, and a large city, Taejon were selected for the study group. Air concentrations of organic solvents in the working environment were analyzed, and subjective symptoms of dry-cleaning workers were surveyed, from July to August 1996. The results obtained were as follows : 1. The concentrations of organic solvents in the working environment were within permissible TLV-TWA limits. 2. For the 13 symptom clusters, the most frequently complained symptom clusters were fatigue as 71.3%, and followed by depression and urinary disturbances as 53.5% and 51.9%. Other symptom clusters complained were below 50%. 3. Positive response rates of subjective symptoms were significantly higher in worker groups such as lived in a large city, female, higher education level, more frequently alcohol drinking, higher concentration of organic solvent in working environment, work in alone. 4. Workers who had used solvent B showed 2.3 point higher scores of subjective symptoms than those of solvent A. Of the subjective symptoms scores, amnesia and nervousness were higher in solvent B user group than solvent B user group. 5. As a result of factor analysis, 3 factors such as depression, urinary disturbance and neurologic disturbance were selected. 6. As a result of the logistic regression analysis, sex, the number of fellow workers, working time, region, job tenure, smoking, alcohol drinking, ventilating system, concentration of organic solvent in working environment and place of residence were selected for the related variables. For the conclusion, even though the concentrations of organic solvents in the working environments of dry-cleaning workers were within permissible limit of TLV-TWA, many dry-cleaning workers complained symptoms, such as fatigue, depression, urinary disturbances and so on. And the factors affecting to the symptoms of dry-cleaning workers were the number of fellow workers, work hours, region, job tenure, smoking and alcohol drinking.

• 대한물리치료과학회지
• /
• 제7권2호
• /
• pp.483-494
• /
• 2000

The purpose of this study was to contribute to quality improvement with physical therapy service and determining the factors affecting patients' satisfaction. The study subjects were ambulatory and admitted patients treated with physical therapy at B general hospital located in Taejon from July 15, 2000 to July 21. Authors developed structured questionnaire, and distributed it to each physical therapist of B general hospital. Total number of distributed questionnaire was 164, and 157 questionnaire were collected and analysed finally. Demand of physical therapy for quality improvement(QI) related to treatment time(r =0.746, P<01), treatment method(r =.664, P<.01). treatment effect(r=0.648, P<.01), equipments(r=0.620, P<.01), cleaning status(r =0.619, P<.01). Willingness to revisit and recommendation of this physical therapy room related to treatment method(r=0.489, P<.01), treatment time(r=0.469, P<.01), cleaning status(r=0.432, P<.01).