• 멤브레인
• /
• 제26권5호
• /
• pp.401-406
• /
• 2016

본 연구에서는 역삼투막공정을 이용하여 수용액 중 저준위 방사성이온인 세슘과 요오드 이온을 제거하는 실험을 수행하였다. 국내에서 생산되는 역삼투막모듈 두 가지와 그리고 폐모듈 세정한 후 세슘과 요오드 이온에 대한 제거성능을 비교하였다. 공급수의 농도와 압력을 달리하여 실험을 진행한 결과, 세 가지 모듈 모두 세슘에 비해 요오드의 제염계수가 높은 것을 알 수 있었으며, 특히, 세정한 모듈은 요오드에 대한 제염계수가 1140으로 확인되었다. 대체적으로 실험조건이 고압일 때보다 저압일 때 제염성능이 좋은 것으로 나타났으며 이는 저압조건에 가까운 압력을 갖는 수도수에 직접 모듈을 설치할 경우에도 사용이 가능하리라 판단되었다. 또한 EDTA와 SBS, NaOH, 마이크로버블 등을 사용하여 세정한 막의 제염성능이 세정 전의 제염성능보다 높아졌으며 저압, 저농도 조건에서 요오드에 대한 회수율이 세정 후에 6.3% 증가한 결과를 얻었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1810-1814
• /
• 2008

A small L-type megasonic module for nano-pattern cleaning was designed and manufactured. The impedance graph of the quartz waveguide with a piezoelectric actuator was predicted using finite element method (FEM). The peak value of the piezoelectric actuator alone was 3.373 MHz, which was the same as the experimentally measured value of 3.373 MHz (0.0% error). In addition, the maximum impedance value of the quartz waveguide with the actuator was 3.373 MHz, which agreed well with the measured value of 3.362 MHz (0.3% error). The acoustic pressures of a conventional megasonic system (3 MHz) and the developed system under similar conditions were measured and compared. The results showed that the maximum values and standard deviations of the developed system decreased by 29% and 18%, respectively, compared with the conventional type. This suggests that the small L-type would have higher particle removal efficiency with lower possibilities of pattern damages.

• 동력기계공학회지
• /
• 제19권1호
• /
• pp.83-89
• /
• 2015

A ball strainer screen module, which is used for a condenser tube cleaning system, is a critical mechanical component for maintaining condenser cleanliness. Despite of this importance, not many research have been focused on this module because of its relatively low usage. Employing CFD, this study examines the implication of fluid velocity change and blockage ratio on the ball strainer screen velocity and the static pressure distribution. Through this study, the impact of blockage in the space between ball strainer screen modules is verified. Also, it is found that the ranges of non-dimensional velocity distribution and static pressure distribution decrease as blockage ratio becomes smaller.

• 로봇학회논문지
• /
• 제12권1호
• /
• pp.65-77
• /
• 2017

In this paper, we introduce the pipe cleaning robot developed to clean the gas impurities of the iron manufacturing equipments. The pipe cleaning robot is composed of two driving modules and one cleaning module. 2-DOF joint units were developed for connections among the modules. To maximize the traction power of the driving parts, it became caterpillar type. The extension links have been developed to maintain the traction force in case the pipe inner diameters change. Three cleaning modules were developed for the effective cleaning in the pipe. The driving and cleaning performance tests of the pipe cleaning robot were proceeded in the field of the iron manufacturing equipments.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
• /
• pp.248-254
• /
• 2012

In the situation of expanding domestic solar power supply business long-term performance modeling of a proposed solar-cooling and cleaning system to increase electromotive force and light transmission is carried out to test the effectiveness of the system. To test the effectiveness of the system, the data which comparing the solar power planet installing the system to not installing at the same time is used. A difference between the utilization factor of each comparison group were recorded. Approximately from one year to two years Field Test was performed, Result of apply to cooling/cleaning technology, Each of plant by From least 7 percent up to 16 percent utilization factor increased, and the cooling / cleaning is output through improved as a result of the determined.

• 상하수도학회지
• /
• 제21권5호
• /
• pp.559-569
• /
• 2007

The purposes of this study were to find the main foulant of membrane and the optimal chemical cleaning method for MF(microfiltration) drinking water treatment system using D dam water as water source. The MF pilot plant which can treat maximum $500m^3/d$ consisted of 3 racks and was operated for 10 months under various operation conditions. After 10 months operation, $1^{st}$ and $2^{nd}$ rack of membrane pilot plant system were cleaned chemically and the degree of the restoration of the fouled membrane in terms of the pure water flux was detemnined. Inorganic compounds which contained in chemical cleaning waste was analyzed by Inductively Coupled Plasma (ICP). One membrane module for 3rd rack was disjointed and membrane fouling materials, especially inorganic compounds were investigated by Electron Probe Microanlysis (EPMA) to elucidate the reason of TMP increase. And also, the various chemical reagents (1N HCl or $H_2SO_4$, oxalic acid as acid and 0.3% NaOCl as alkali) were tested by combination of acid and alkali to determine the optimal chemical cleaning method for the MF system using micro-modules manufactured using the disjointed module. It was verified that the inside and outside of membrane module was colorized with black. As a result of the quantitative and semi-qualitative analysis of membrane foulant by ICP, most of inorganic foulant was manganese which is hard to remove by inorganic acid such as HCI. Especially, it was observed by EPMA that Mn was attached more seriously in inside surface of membrane than in outside surface of that. It was supposed that Mn fouling in inside surface of membrane might be caused by the oxidation of soluble manganese (Mn(II)) to insoluble manganese ($MnO_2$) by chlorine containing in backwashing water. The optimal cleaning method for the removal of manganese fouling was consecutive cleaning with the mixture of 1N HCl and 1% of oxalic acid, 0.3% NaOCl, and 1N HCl showing 91% of the restoration of the fouled membrane.

• 한국태양에너지학회 논문집
• /
• 제29권6호
• /
• pp.88-93
• /
• 2009

This study was conducted to improve the power of PV module using a surface cooling system One of the unique characteristics of PV module is power drop as a module surface temperature increases due to the characteristics of crystalline silicon used in a solar cell. To overcome the output power reduction by temperature effect, module surface cooling using water circulation was performed. By cooling effect, module surface temperature drops maximally $20.3^{\circ}C$ predicting more than 10% power enhancement. Maximum deviation of voltage and current between a control and cooled module differed by 5.1 V and O.9A respectively. The maximum power enhancement by cooling system was 12.4% compared with a control module. In addition, cooling system can wash the module surface by water circulation so that extra power up of PV module can be achieved by removing particles on the surface which interfere solar radiation on the cells. Cooling system, besides, can reduce the maintenance cost and prevent accidents as a safety precaution while cleaning works. This system can be applied to the existing photovoltaic power generation facilities without any difficulties as well.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.309-313
• /
• 2009

This study was conducted to improve the power of PV module using a surface cooling system. One of the unique characteristics of PV module is power drop as a module surface temperature increases due to the characteristics of crystalline silicon used in a solar cell. To overcome the output power reduction by temperature effect, module surface cooling using water circulation was performed. By cooling effect, module surface temperature drops maximally $20.3^{\circ}C$ predicting more than 10% power enhancement. Maximum deviation of voltage and current between a control and cooled module differed by 5.1V and 0.9A respectively. The maximum power enhancement by cooling system was 12.4% compared with a control module. In addition, cooling system can wash the module surface by water circulation so that extra power up of PV module can be achieved by removing particles on the surface which interfere solar radiation on the cells. Cooling system, besides, can reduce the maintenance cost and prevent accidents as a safety precaution while cleaning works. This system can be applied to the existing photovoltaic power generation facilities without any difficulties as well.

• 한국산학기술학회논문지
• /
• 제17권1호
• /
• pp.290-297
• /
• 2016

도시철도 터널내에 축적된 미세먼지(PM10 and PM2.5)의 제거를 위해 사용되는 분진흡입차량의 성능은 하부흡입시스템의 설계방법에 따라 성능이 달라진다. 본 논문에서는 터널집진차량의 하부에 설치된 먼지흡입시스템의 고효율화를 위하여 궤도의 바닥면에 쌓인 먼지를 비산시키는 압축공기 블로어와 먼지 흡입구를 동시에 가지는 모듈화된 먼지흡입구조를 제안하였다. 흡입과 블로어의 상반된 구조를 동시에 가진 흡입시스템의 먼지유동 최적화를 위해 난류유동에 기초한 수치해석을 수행하였다. 해석결과로 먼지흡입효율을 최대화 할 수 있는 공기 블로어의 설치각이 $6^{\circ}$ 내외에서 결정되고, 이를 적용하면 5 km/h의 청소속도를 가지는 분진흡입차량의 흡입효율을 10%이상 높일 수 있음을 확인하였다.

• 한국정보통신학회논문지
• /
• 제12권11호
• /
• pp.2005-2014
• /
• 2008

본 논문에서는 UPnP를 이용하여 RFID 서비스 발견 및 제어를 할 수 있는 상황인식 서비스 시스템을 제안한다. 제안된 시스템은 자원이 부족한 RFID 태그의 서비스를 위한 미들웨어 플랫폼으로 UPnP를 적용한다. UPnP를 적용하여 시스템을 구축하면 상황인식 서비스의 개발이 용이하며 별도의 설정 없이도 RFID 디바이스 서비스를 제공받을 수 있다. 또한, RFID의 상황인식 데이터의 신뢰도를 높이기 위하여 SQL 기반의 클리닝 (cleaning) 모듈을 설계하고 구현한다. 제안 개발된 클리닝 모듈을 적용하여 RFID 시스템의 태그에 대한 순수 인식률을 $60{\sim}80%$ 정도에서 98% 이상으로 향상 시켰다. 제안된 UPnP 기반 RFID 상황인식 서비스 검증을 위하여 물류서비스에 대한 상황인식 시나리오를 제시하고, RFID 서비스 아키텍처 와 UPnP 서비스 발견 플랫폼을 구현하였다. 또한, 구현된 시나리오상에서 UPnP 서비스 광고 메시지의 네트워크 혼잡 기여도와 RFID 시스템의 태그에 대한 순수 인식률을 실험하고 분석하여 제안된 방식의 타당성을 검증한다.